{ "_class" : "org.jenkinsci.plugins.workflow.job.WorkflowRun", "actions" : [ { "_class" : "hudson.model.ParametersAction", "parameters" : [ { "_class" : "hudson.model.StringParameterValue", "name" : "getBranchs", "value" : "true" }, { "_class" : "hudson.model.StringParameterValue", "name" : "allBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "deviceChoice", "value" : "false" }, { "_class" : "hudson.model.StringParameterValue", "name" : "commitChoice", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msgBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "pncBranch", "value" : "feat_trajectory" }, { "_class" : "hudson.model.StringParameterValue", "name" : "guardianBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hesaiBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "v2Branch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msfLocBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "lsDetectionBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "craneDetectionBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "simulatorBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "craneAlignBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "containerMeasureBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msfAssistantBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "chassisBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "tosVisualizeBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msgRecorderBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "staticTransformBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "predictionBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "systemRosBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "seniorCalibrationBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rslidarSDKBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "fmsAgentBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "mrpt2Branch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "peripheralControllerBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "warningModuleBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "lidarCameraFusionBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "predictionSceneFetcherBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "sinsCalibrationHmiBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rminterpreterBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "controlBranch", "value" : "feat_cargo_width_sim" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapCloudBranch", "value" : "feat_multiple_process" }, { "_class" : "hudson.model.StringParameterValue", "name" : "lidarManualCalibBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "thirdpartyBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerHmiBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerOnlineBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "unifiedSystemMonitorBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rosBridgeBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdcontrolBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "versionsObserverBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "multiSimulatorBranch", "value" : "dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "cacheBagNodeBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "virtualLampBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "truckUpLiDarCalibToolBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapInterfaceBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "pncSimBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "trafficCtrlBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "notes", "value" : "工控专用（s1仿真）" }, { "_class" : "hudson.model.StringParameterValue", "name" : "users", "value" : "" } ] }, { "_class" : "hudson.model.CauseAction", "causes" : [ { "_class" : "hudson.model.Cause$UserIdCause", "shortDescription" : "Started by user wuyanjun", "userId" : "wuyanjun", "userName" : "wuyanjun" } ] }, { "_class" : "org.jenkinsci.plugins.workflow.libs.LibrariesAction" }, { }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "master" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "83afcf111d790d05dcd6e1295f10a1ad26666d91", "branch" : [ { "SHA1" : "83afcf111d790d05dcd6e1295f10a1ad26666d91", "name" : "master" } ] }, "revision" : { "SHA1" : "83afcf111d790d05dcd6e1295f10a1ad26666d91", "branch" : [ { "SHA1" : "83afcf111d790d05dcd6e1295f10a1ad26666d91", "name" : "master" } ] } } }, "lastBuiltRevision" : { "SHA1" : "83afcf111d790d05dcd6e1295f10a1ad26666d91", "branch" : [ { "SHA1" : "83afcf111d790d05dcd6e1295f10a1ad26666d91", "name" : "master" } ] }, "remoteUrls" : [ "http://159.27.226.4/weilikang/jenkinslib.git" ], "scmName" : "" }, { }, { }, { "_class" : "org.jenkinsci.plugins.workflow.cps.EnvActionImpl" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "refs/remotes/origin/master" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "bcbc399e19f9c0480180eb0cd8c2a1ea017d6c33", "branch" : [ { "SHA1" : "bcbc399e19f9c0480180eb0cd8c2a1ea017d6c33", "name" : "refs/remotes/origin/master" } ] }, "revision" : { "SHA1" : "bcbc399e19f9c0480180eb0cd8c2a1ea017d6c33", "branch" : [ { "SHA1" : "bcbc399e19f9c0480180eb0cd8c2a1ea017d6c33", "name" : "refs/remotes/origin/master" } ] } } }, "lastBuiltRevision" : { "SHA1" : "bcbc399e19f9c0480180eb0cd8c2a1ea017d6c33", "branch" : [ { "SHA1" : "bcbc399e19f9c0480180eb0cd8c2a1ea017d6c33", "name" : "refs/remotes/origin/master" } ] }, "remoteUrls" : [ "http://159.27.226.4/weilikang/jenkinsfiles.git" ], "scmName" : "" }, { }, { }, { }, { "_class" : "org.jenkinsci.plugins.workflow.cps.view.InterpolatedSecretsAction" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rcdev_851df6_obs" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 276, "buildResult" : None, "marked" : { "SHA1" : "30ce215b2d541fde064c1e6b51a9b3d08d8ffa1e", "branch" : [ { "SHA1" : "30ce215b2d541fde064c1e6b51a9b3d08d8ffa1e", "name" : "origin/rcdev_851df6_obs" } ] }, "revision" : { "SHA1" : "30ce215b2d541fde064c1e6b51a9b3d08d8ffa1e", "branch" : [ { "SHA1" : "30ce215b2d541fde064c1e6b51a9b3d08d8ffa1e", "name" : "origin/rcdev_851df6_obs" } ] } }, "origin/feat_multiple_routes" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 146, "buildResult" : None, "marked" : { "SHA1" : "a1bc920a7d8ce28cbb0f8f4f91d8fc0f1ee3e719", "branch" : [ { "SHA1" : "a1bc920a7d8ce28cbb0f8f4f91d8fc0f1ee3e719", "name" : "origin/feat_multiple_routes" } ] }, "revision" : { "SHA1" : "a1bc920a7d8ce28cbb0f8f4f91d8fc0f1ee3e719", "branch" : [ { "SHA1" : "a1bc920a7d8ce28cbb0f8f4f91d8fc0f1ee3e719", "name" : "origin/feat_multiple_routes" } ] } }, "origin/feat_traffic_ctrl" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 837, "buildResult" : None, "marked" : { "SHA1" : "ed4cd8613c4f160f6dc004b8411d5ac6ce93c9f0", "branch" : [ { "SHA1" : "ed4cd8613c4f160f6dc004b8411d5ac6ce93c9f0", "name" : "origin/feat_traffic_ctrl" } ] }, "revision" : { "SHA1" : "ed4cd8613c4f160f6dc004b8411d5ac6ce93c9f0", "branch" : [ { "SHA1" : "ed4cd8613c4f160f6dc004b8411d5ac6ce93c9f0", "name" : "origin/feat_traffic_ctrl" } ] } }, "origin/rc_dev_baoshishun" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 715, "buildResult" : None, "marked" : { "SHA1" : "1060eccdc1ce393d65d835c0f86b9bb78729960e", "branch" : [ { "SHA1" : "1060eccdc1ce393d65d835c0f86b9bb78729960e", "name" : "origin/rc_dev_baoshishun" } ] }, "revision" : { "SHA1" : "1060eccdc1ce393d65d835c0f86b9bb78729960e", "branch" : [ { "SHA1" : "1060eccdc1ce393d65d835c0f86b9bb78729960e", "name" : "origin/rc_dev_baoshishun" } ] } }, "origin/feat_gps_destination" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 57, "buildResult" : None, "marked" : { "SHA1" : "1ad428a18cb2b12ae43fb895c1e135956a73e36d", "branch" : [ { "SHA1" : "1ad428a18cb2b12ae43fb895c1e135956a73e36d", "name" : "origin/feat_gps_destination" } ] }, "revision" : { "SHA1" : "1ad428a18cb2b12ae43fb895c1e135956a73e36d", "branch" : [ { "SHA1" : "1ad428a18cb2b12ae43fb895c1e135956a73e36d", "name" : "origin/feat_gps_destination" } ] } }, "origin/feat_multiple_path" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 269, "buildResult" : None, "marked" : { "SHA1" : "d54cf8742b0d6a6d1d6ad06beb448f37152ca1d8", "branch" : [ { "SHA1" : "d54cf8742b0d6a6d1d6ad06beb448f37152ca1d8", "name" : "origin/feat_multiple_path" } ] }, "revision" : { "SHA1" : "d54cf8742b0d6a6d1d6ad06beb448f37152ca1d8", "branch" : [ { "SHA1" : "d54cf8742b0d6a6d1d6ad06beb448f37152ca1d8", "name" : "origin/feat_multiple_path" } ] } }, "origin/rc_dev_xiamen" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 717, "buildResult" : None, "marked" : { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "branch" : [ { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "name" : "origin/rc_dev_xiamen" } ] }, "revision" : { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "branch" : [ { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "name" : "origin/rc_dev_xiamen" } ] } }, "origin/rc_dev_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 803, "buildResult" : None, "marked" : { "SHA1" : "a26e5ad39203c993966d44fffa5713b01d617b97", "branch" : [ { "SHA1" : "a26e5ad39203c993966d44fffa5713b01d617b97", "name" : "origin/rc_dev_xilian" } ] }, "revision" : { "SHA1" : "a26e5ad39203c993966d44fffa5713b01d617b97", "branch" : [ { "SHA1" : "a26e5ad39203c993966d44fffa5713b01d617b97", "name" : "origin/rc_dev_xilian" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 506, "buildResult" : None, "marked" : { "SHA1" : "b620c9e6a12a69dd6565be4549a34b1fb0071849", "branch" : [ { "SHA1" : "b620c9e6a12a69dd6565be4549a34b1fb0071849", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "b620c9e6a12a69dd6565be4549a34b1fb0071849", "branch" : [ { "SHA1" : "b620c9e6a12a69dd6565be4549a34b1fb0071849", "name" : "origin/dev" } ] } }, "origin/cloud_control" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 11, "buildResult" : None, "marked" : { "SHA1" : "b2e00423d7e8a37d17078cd270fda3bd3564bba1", "branch" : [ { "SHA1" : "b2e00423d7e8a37d17078cd270fda3bd3564bba1", "name" : "origin/cloud_control" } ] }, "revision" : { "SHA1" : "b2e00423d7e8a37d17078cd270fda3bd3564bba1", "branch" : [ { "SHA1" : "b2e00423d7e8a37d17078cd270fda3bd3564bba1", "name" : "origin/cloud_control" } ] } }, "origin/feat_cloud_routing" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 40, "buildResult" : None, "marked" : { "SHA1" : "dfdc18acd4a201c6f685d5e5869f63158cfc95bc", "branch" : [ { "SHA1" : "dfdc18acd4a201c6f685d5e5869f63158cfc95bc", "name" : "origin/feat_cloud_routing" } ] }, "revision" : { "SHA1" : "dfdc18acd4a201c6f685d5e5869f63158cfc95bc", "branch" : [ { "SHA1" : "dfdc18acd4a201c6f685d5e5869f63158cfc95bc", "name" : "origin/feat_cloud_routing" } ] } }, "origin/feat_baoshishun_cargo_width" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 699, "buildResult" : None, "marked" : { "SHA1" : "1ea1070164a49d1853d8d11c813dac5e036cf61d", "branch" : [ { "SHA1" : "1ea1070164a49d1853d8d11c813dac5e036cf61d", "name" : "origin/feat_baoshishun_cargo_width" } ] }, "revision" : { "SHA1" : "1ea1070164a49d1853d8d11c813dac5e036cf61d", "branch" : [ { "SHA1" : "1ea1070164a49d1853d8d11c813dac5e036cf61d", "name" : "origin/feat_baoshishun_cargo_width" } ] } }, "origin/feat_c2v" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 325, "buildResult" : None, "marked" : { "SHA1" : "c71c9fc580d97d1cd422ead325f2e7e9ebe1eecb", "branch" : [ { "SHA1" : "c71c9fc580d97d1cd422ead325f2e7e9ebe1eecb", "name" : "origin/feat_c2v" } ] }, "revision" : { "SHA1" : "c71c9fc580d97d1cd422ead325f2e7e9ebe1eecb", "branch" : [ { "SHA1" : "c71c9fc580d97d1cd422ead325f2e7e9ebe1eecb", "name" : "origin/feat_c2v" } ] } }, "origin/feat_monitor_frame" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 491, "buildResult" : None, "marked" : { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "branch" : [ { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "name" : "origin/feat_monitor_frame" } ] }, "revision" : { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "branch" : [ { "SHA1" : "ca7c2a8369584e2797d47ddc5bcee2e7bc94013a", "name" : "origin/feat_monitor_frame" } ] } }, "origin/rc_dev_traffic" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 695, "buildResult" : None, "marked" : { "SHA1" : "d5d0e81778f04b4590213f8d5719662d9ef1c7b7", "branch" : [ { "SHA1" : "d5d0e81778f04b4590213f8d5719662d9ef1c7b7", "name" : "origin/rc_dev_traffic" } ] }, "revision" : { "SHA1" : "d5d0e81778f04b4590213f8d5719662d9ef1c7b7", "branch" : [ { "SHA1" : "d5d0e81778f04b4590213f8d5719662d9ef1c7b7", "name" : "origin/rc_dev_traffic" } ] } }, "origin/youyiguan_add_trailer_info" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 845, "buildResult" : None, "marked" : { "SHA1" : "062de51109603913f092d421e259df68b3b57f8f", "branch" : [ { "SHA1" : "062de51109603913f092d421e259df68b3b57f8f", "name" : "origin/youyiguan_add_trailer_info" } ] }, "revision" : { "SHA1" : "062de51109603913f092d421e259df68b3b57f8f", "branch" : [ { "SHA1" : "062de51109603913f092d421e259df68b3b57f8f", "name" : "origin/youyiguan_add_trailer_info" } ] } }, "origin/rcdev_0a13c34" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 465, "buildResult" : None, "marked" : { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "branch" : [ { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "name" : "origin/rcdev_0a13c34" } ] }, "revision" : { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "branch" : [ { "SHA1" : "0a13c3462eee863b32a43ea2e82612f649af702a", "name" : "origin/rcdev_0a13c34" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev" } ] } }, "origin/feat_v2x" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 107, "buildResult" : None, "marked" : { "SHA1" : "2a62c8a55c59e7e2a1680c467864fc375aa14721", "branch" : [ { "SHA1" : "2a62c8a55c59e7e2a1680c467864fc375aa14721", "name" : "origin/feat_v2x" } ] }, "revision" : { "SHA1" : "2a62c8a55c59e7e2a1680c467864fc375aa14721", "branch" : [ { "SHA1" : "2a62c8a55c59e7e2a1680c467864fc375aa14721", "name" : "origin/feat_v2x" } ] } }, "origin/rc_dev_qiangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 754, "buildResult" : None, "marked" : { "SHA1" : "289cda308241280b261706930b818b90420fcb5f", "branch" : [ { "SHA1" : "289cda308241280b261706930b818b90420fcb5f", "name" : "origin/rc_dev_qiangang" } ] }, "revision" : { "SHA1" : "289cda308241280b261706930b818b90420fcb5f", "branch" : [ { "SHA1" : "289cda308241280b261706930b818b90420fcb5f", "name" : "origin/rc_dev_qiangang" } ] } }, "origin/rcdev_9d6699_obs" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 277, "buildResult" : None, "marked" : { "SHA1" : "fda58bd182b6e0f4c4a732c0902a1386c9f2fb78", "branch" : [ { "SHA1" : "fda58bd182b6e0f4c4a732c0902a1386c9f2fb78", "name" : "origin/rcdev_9d6699_obs" } ] }, "revision" : { "SHA1" : "fda58bd182b6e0f4c4a732c0902a1386c9f2fb78", "branch" : [ { "SHA1" : "fda58bd182b6e0f4c4a732c0902a1386c9f2fb78", "name" : "origin/rcdev_9d6699_obs" } ] } }, "origin/feat-peripheral_op_state" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 476, "buildResult" : None, "marked" : { "SHA1" : "4f0d1733cabb9531e5177261c6c48e2a5e67aec1", "branch" : [ { "SHA1" : "4f0d1733cabb9531e5177261c6c48e2a5e67aec1", "name" : "origin/feat-peripheral_op_state" } ] }, "revision" : { "SHA1" : "4f0d1733cabb9531e5177261c6c48e2a5e67aec1", "branch" : [ { "SHA1" : "4f0d1733cabb9531e5177261c6c48e2a5e67aec1", "name" : "origin/feat-peripheral_op_state" } ] } }, "origin/rc_dev_mandula" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 698, "buildResult" : None, "marked" : { "SHA1" : "b480a3026782e6090d1950c40614ca5f1b7e5d70", "branch" : [ { "SHA1" : "b480a3026782e6090d1950c40614ca5f1b7e5d70", "name" : "origin/rc_dev_mandula" } ] }, "revision" : { "SHA1" : "b480a3026782e6090d1950c40614ca5f1b7e5d70", "branch" : [ { "SHA1" : "b480a3026782e6090d1950c40614ca5f1b7e5d70", "name" : "origin/rc_dev_mandula" } ] } }, "origin/feat_lane_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 713, "buildResult" : None, "marked" : { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "branch" : [ { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "name" : "origin/feat_lane_change" } ] }, "revision" : { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "branch" : [ { "SHA1" : "5edde714fd5009dce8a08067bfa73d09adf298d6", "name" : "origin/feat_lane_change" } ] } }, "origin/feat_qiangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 737, "buildResult" : None, "marked" : { "SHA1" : "289cda308241280b261706930b818b90420fcb5f", "branch" : [ { "SHA1" : "289cda308241280b261706930b818b90420fcb5f", "name" : "origin/feat_qiangang" } ] }, "revision" : { "SHA1" : "289cda308241280b261706930b818b90420fcb5f", "branch" : [ { "SHA1" : "289cda308241280b261706930b818b90420fcb5f", "name" : "origin/feat_qiangang" } ] } }, "origin/feat-peripheral_op_state-chassis_err" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 504, "buildResult" : None, "marked" : { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "branch" : [ { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "name" : "origin/feat-peripheral_op_state-chassis_err" } ] }, "revision" : { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "branch" : [ { "SHA1" : "3fed282b426dddc8539eed2eac1b7bc368431e71", "name" : "origin/feat-peripheral_op_state-chassis_err" } ] } }, "origin/rc_dev_93cc60" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 587, "buildResult" : None, "marked" : { "SHA1" : "93cc602576f9f342ff85e9cc672a683b99db923b", "branch" : [ { "SHA1" : "93cc602576f9f342ff85e9cc672a683b99db923b", "name" : "origin/rc_dev_93cc60" } ] }, "revision" : { "SHA1" : "93cc602576f9f342ff85e9cc672a683b99db923b", "branch" : [ { "SHA1" : "93cc602576f9f342ff85e9cc672a683b99db923b", "name" : "origin/rc_dev_93cc60" } ] } }, "origin/test2" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 101, "buildResult" : None, "marked" : { "SHA1" : "c5d08ebc61b12f3112e10bda6003c558d8228f24", "branch" : [ { "SHA1" : "c5d08ebc61b12f3112e10bda6003c558d8228f24", "name" : "origin/test2" } ] }, "revision" : { "SHA1" : "c5d08ebc61b12f3112e10bda6003c558d8228f24", "branch" : [ { "SHA1" : "c5d08ebc61b12f3112e10bda6003c558d8228f24", "name" : "origin/test2" } ] } }, "origin/rcdev_eda38eea" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 397, "buildResult" : None, "marked" : { "SHA1" : "eda38eeac1aeb69de3272a92d821653d495a9d57", "branch" : [ { "SHA1" : "eda38eeac1aeb69de3272a92d821653d495a9d57", "name" : "origin/rcdev_eda38eea" } ] }, "revision" : { "SHA1" : "eda38eeac1aeb69de3272a92d821653d495a9d57", "branch" : [ { "SHA1" : "eda38eeac1aeb69de3272a92d821653d495a9d57", "name" : "origin/rcdev_eda38eea" } ] } }, "origin/rc_dev_jiningliangshangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 844, "buildResult" : None, "marked" : { "SHA1" : "b555550e0d4d4f08a57279035aa984228562d1e5", "branch" : [ { "SHA1" : "b555550e0d4d4f08a57279035aa984228562d1e5", "name" : "origin/rc_dev_jiningliangshangang" } ] }, "revision" : { "SHA1" : "b555550e0d4d4f08a57279035aa984228562d1e5", "branch" : [ { "SHA1" : "b555550e0d4d4f08a57279035aa984228562d1e5", "name" : "origin/rc_dev_jiningliangshangang" } ] } }, "origin/feat_target_new_no_canfd" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 178, "buildResult" : None, "marked" : { "SHA1" : "8190ab57ce3a6afdcc7a7bde7ed19b9a5412e4db", "branch" : [ { "SHA1" : "8190ab57ce3a6afdcc7a7bde7ed19b9a5412e4db", "name" : "origin/feat_target_new_no_canfd" } ] }, "revision" : { "SHA1" : "8190ab57ce3a6afdcc7a7bde7ed19b9a5412e4db", "branch" : [ { "SHA1" : "8190ab57ce3a6afdcc7a7bde7ed19b9a5412e4db", "name" : "origin/feat_target_new_no_canfd" } ] } }, "origin/rc_dev_shenqi" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 805, "buildResult" : None, "marked" : { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "branch" : [ { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "name" : "origin/rc_dev_shenqi" } ] }, "revision" : { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "branch" : [ { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "name" : "origin/rc_dev_shenqi" } ] } }, "origin/feat_youyiguan_pnc_status" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 846, "buildResult" : None, "marked" : { "SHA1" : "064275f4d242cd902fac318edf3701932d2a9c27", "branch" : [ { "SHA1" : "064275f4d242cd902fac318edf3701932d2a9c27", "name" : "origin/feat_youyiguan_pnc_status" } ] }, "revision" : { "SHA1" : "064275f4d242cd902fac318edf3701932d2a9c27", "branch" : [ { "SHA1" : "064275f4d242cd902fac318edf3701932d2a9c27", "name" : "origin/feat_youyiguan_pnc_status" } ] } }, "origin/feat_target_new" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 205, "buildResult" : None, "marked" : { "SHA1" : "2e757e3bc4a1f3710c698caadfc690b31e4d0f29", "branch" : [ { "SHA1" : "2e757e3bc4a1f3710c698caadfc690b31e4d0f29", "name" : "origin/feat_target_new" } ] }, "revision" : { "SHA1" : "2e757e3bc4a1f3710c698caadfc690b31e4d0f29", "branch" : [ { "SHA1" : "2e757e3bc4a1f3710c698caadfc690b31e4d0f29", "name" : "origin/feat_target_new" } ] } }, "origin/test6" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 210, "buildResult" : None, "marked" : { "SHA1" : "45e3a53c83776e3ed15a6431118cc38ff6a8a32e", "branch" : [ { "SHA1" : "45e3a53c83776e3ed15a6431118cc38ff6a8a32e", "name" : "origin/test6" } ] }, "revision" : { "SHA1" : "45e3a53c83776e3ed15a6431118cc38ff6a8a32e", "branch" : [ { "SHA1" : "45e3a53c83776e3ed15a6431118cc38ff6a8a32e", "name" : "origin/test6" } ] } }, "origin/rc_dev_escape" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 804, "buildResult" : None, "marked" : { "SHA1" : "c23254670f7b52f763755d3ae713b5f945009062", "branch" : [ { "SHA1" : "c23254670f7b52f763755d3ae713b5f945009062", "name" : "origin/rc_dev_escape" } ] }, "revision" : { "SHA1" : "c23254670f7b52f763755d3ae713b5f945009062", "branch" : [ { "SHA1" : "c23254670f7b52f763755d3ae713b5f945009062", "name" : "origin/rc_dev_escape" } ] } }, "origin/test5" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 150, "buildResult" : None, "marked" : { "SHA1" : "c31019e10a60e24ec2e0130392cd4d9ab6b156a2", "branch" : [ { "SHA1" : "c31019e10a60e24ec2e0130392cd4d9ab6b156a2", "name" : "origin/test5" } ] }, "revision" : { "SHA1" : "c31019e10a60e24ec2e0130392cd4d9ab6b156a2", "branch" : [ { "SHA1" : "c31019e10a60e24ec2e0130392cd4d9ab6b156a2", "name" : "origin/test5" } ] } }, "origin/dev_direction" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 285, "buildResult" : None, "marked" : { "SHA1" : "6411c275ca6b5168853fe5bb65aa98954bb812c3", "branch" : [ { "SHA1" : "6411c275ca6b5168853fe5bb65aa98954bb812c3", "name" : "origin/dev_direction" } ] }, "revision" : { "SHA1" : "6411c275ca6b5168853fe5bb65aa98954bb812c3", "branch" : [ { "SHA1" : "6411c275ca6b5168853fe5bb65aa98954bb812c3", "name" : "origin/dev_direction" } ] } }, "origin/rcdev_932d6d" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 343, "buildResult" : None, "marked" : { "SHA1" : "932d6dbbd304eb1cd8f0e74f6a1b664fcea169bc", "branch" : [ { "SHA1" : "932d6dbbd304eb1cd8f0e74f6a1b664fcea169bc", "name" : "origin/rcdev_932d6d" } ] }, "revision" : { "SHA1" : "932d6dbbd304eb1cd8f0e74f6a1b664fcea169bc", "branch" : [ { "SHA1" : "932d6dbbd304eb1cd8f0e74f6a1b664fcea169bc", "name" : "origin/rcdev_932d6d" } ] } }, "origin/rc_dev_184937" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 697, "buildResult" : None, "marked" : { "SHA1" : "184937840d35a83cb9158067f5fc65458db35e7a", "branch" : [ { "SHA1" : "184937840d35a83cb9158067f5fc65458db35e7a", "name" : "origin/rc_dev_184937" } ] }, "revision" : { "SHA1" : "184937840d35a83cb9158067f5fc65458db35e7a", "branch" : [ { "SHA1" : "184937840d35a83cb9158067f5fc65458db35e7a", "name" : "origin/rc_dev_184937" } ] } }, "origin/rc_dev_yangpu" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 832, "buildResult" : None, "marked" : { "SHA1" : "7b898979876c3089d42c8ecbfbeef3da821c694b", "branch" : [ { "SHA1" : "7b898979876c3089d42c8ecbfbeef3da821c694b", "name" : "origin/rc_dev_yangpu" } ] }, "revision" : { "SHA1" : "7b898979876c3089d42c8ecbfbeef3da821c694b", "branch" : [ { "SHA1" : "7b898979876c3089d42c8ecbfbeef3da821c694b", "name" : "origin/rc_dev_yangpu" } ] } }, "origin/feat_target" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 687, "buildResult" : None, "marked" : { "SHA1" : "762ac69a8087af8a7d2988094ab4943f538e8a04", "branch" : [ { "SHA1" : "762ac69a8087af8a7d2988094ab4943f538e8a04", "name" : "origin/feat_target" } ] }, "revision" : { "SHA1" : "762ac69a8087af8a7d2988094ab4943f538e8a04", "branch" : [ { "SHA1" : "762ac69a8087af8a7d2988094ab4943f538e8a04", "name" : "origin/feat_target" } ] } }, "origin/rc_dev_xiasha" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 840, "buildResult" : None, "marked" : { "SHA1" : "5ff3f9f0243db94d0e0cd5aeb7f8783b4ffc5c75", "branch" : [ { "SHA1" : "5ff3f9f0243db94d0e0cd5aeb7f8783b4ffc5c75", "name" : "origin/rc_dev_xiasha" } ] }, "revision" : { "SHA1" : "5ff3f9f0243db94d0e0cd5aeb7f8783b4ffc5c75", "branch" : [ { "SHA1" : "5ff3f9f0243db94d0e0cd5aeb7f8783b4ffc5c75", "name" : "origin/rc_dev_xiasha" } ] } }, "origin/feat_yard_lane_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 605, "buildResult" : None, "marked" : { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "branch" : [ { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "name" : "origin/feat_yard_lane_change" } ] }, "revision" : { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "branch" : [ { "SHA1" : "9c5267888fbed74808f7b7c3fa5beff157057207", "name" : "origin/feat_yard_lane_change" } ] } }, "origin/rc_dev_6ebc0b7" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 243, "buildResult" : None, "marked" : { "SHA1" : "6ebc0b71421d691d95619783df2f4ba0c3c5bfe0", "branch" : [ { "SHA1" : "6ebc0b71421d691d95619783df2f4ba0c3c5bfe0", "name" : "origin/rc_dev_6ebc0b7" } ] }, "revision" : { "SHA1" : "6ebc0b71421d691d95619783df2f4ba0c3c5bfe0", "branch" : [ { "SHA1" : "6ebc0b71421d691d95619783df2f4ba0c3c5bfe0", "name" : "origin/rc_dev_6ebc0b7" } ] } }, "origin/rcdev_bb3dcc82" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 373, "buildResult" : None, "marked" : { "SHA1" : "bb3dcc82df50a0ed53c641e71d70a36a5c14a4a1", "branch" : [ { "SHA1" : "bb3dcc82df50a0ed53c641e71d70a36a5c14a4a1", "name" : "origin/rcdev_bb3dcc82" } ] }, "revision" : { "SHA1" : "bb3dcc82df50a0ed53c641e71d70a36a5c14a4a1", "branch" : [ { "SHA1" : "bb3dcc82df50a0ed53c641e71d70a36a5c14a4a1", "name" : "origin/rcdev_bb3dcc82" } ] } }, "origin/rc_dev_sim" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 789, "buildResult" : None, "marked" : { "SHA1" : "5ff3f9f0243db94d0e0cd5aeb7f8783b4ffc5c75", "branch" : [ { "SHA1" : "5ff3f9f0243db94d0e0cd5aeb7f8783b4ffc5c75", "name" : "origin/rc_dev_sim" } ] }, "revision" : { "SHA1" : "5ff3f9f0243db94d0e0cd5aeb7f8783b4ffc5c75", "branch" : [ { "SHA1" : "5ff3f9f0243db94d0e0cd5aeb7f8783b4ffc5c75", "name" : "origin/rc_dev_sim" } ] } }, "origin/rc_dev_7cd80d" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 228, "buildResult" : None, "marked" : { "SHA1" : "7cd80dd0b4762f1b5512d70ef6e70c396440a2b7", "branch" : [ { "SHA1" : "7cd80dd0b4762f1b5512d70ef6e70c396440a2b7", "name" : "origin/rc_dev_7cd80d" } ] }, "revision" : { "SHA1" : "7cd80dd0b4762f1b5512d70ef6e70c396440a2b7", "branch" : [ { "SHA1" : "7cd80dd0b4762f1b5512d70ef6e70c396440a2b7", "name" : "origin/rc_dev_7cd80d" } ] } } }, "lastBuiltRevision" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/shared/shared_msgs.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/dev_ph_test_lane_change_new2_test_new1" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 119, "buildResult" : None, "marked" : { "SHA1" : "ececbffd5940a4f7e4cc8e4f5aa1a6d7bdc93efe", "branch" : [ { "SHA1" : "ececbffd5940a4f7e4cc8e4f5aa1a6d7bdc93efe", "name" : "origin/dev_ph_test_lane_change_new2_test_new1" } ] }, "revision" : { "SHA1" : "ececbffd5940a4f7e4cc8e4f5aa1a6d7bdc93efe", "branch" : [ { "SHA1" : "ececbffd5940a4f7e4cc8e4f5aa1a6d7bdc93efe", "name" : "origin/dev_ph_test_lane_change_new2_test_new1" } ] } }, "origin/feat_safety_check_xl" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 620, "buildResult" : None, "marked" : { "SHA1" : "d632d6cff5ec511e33717b455dc937f4f8816c6c", "branch" : [ { "SHA1" : "d632d6cff5ec511e33717b455dc937f4f8816c6c", "name" : "origin/feat_safety_check_xl" } ] }, "revision" : { "SHA1" : "d632d6cff5ec511e33717b455dc937f4f8816c6c", "branch" : [ { "SHA1" : "d632d6cff5ec511e33717b455dc937f4f8816c6c", "name" : "origin/feat_safety_check_xl" } ] } }, "origin/feat_up_down_bridge" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 178, "buildResult" : None, "marked" : { "SHA1" : "e72e9636b846308757ae522079c3365e3af6fae7", "branch" : [ { "SHA1" : "e72e9636b846308757ae522079c3365e3af6fae7", "name" : "origin/feat_up_down_bridge" } ] }, "revision" : { "SHA1" : "e72e9636b846308757ae522079c3365e3af6fae7", "branch" : [ { "SHA1" : "e72e9636b846308757ae522079c3365e3af6fae7", "name" : "origin/feat_up_down_bridge" } ] } }, "origin/tmp_collision_opt" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 370, "buildResult" : None, "marked" : { "SHA1" : "7b0bf0d2c51e50fa76905ba2d4f98a34a70a7876", "branch" : [ { "SHA1" : "7b0bf0d2c51e50fa76905ba2d4f98a34a70a7876", "name" : "origin/tmp_collision_opt" } ] }, "revision" : { "SHA1" : "7b0bf0d2c51e50fa76905ba2d4f98a34a70a7876", "branch" : [ { "SHA1" : "7b0bf0d2c51e50fa76905ba2d4f98a34a70a7876", "name" : "origin/tmp_collision_opt" } ] } }, "origin/feat_up_down_msg" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 190, "buildResult" : None, "marked" : { "SHA1" : "fb0714a6160ecb222b8247ddce1d738194b86d6e", "branch" : [ { "SHA1" : "fb0714a6160ecb222b8247ddce1d738194b86d6e", "name" : "origin/feat_up_down_msg" } ] }, "revision" : { "SHA1" : "fb0714a6160ecb222b8247ddce1d738194b86d6e", "branch" : [ { "SHA1" : "fb0714a6160ecb222b8247ddce1d738194b86d6e", "name" : "origin/feat_up_down_msg" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 685, "buildResult" : None, "marked" : { "SHA1" : "fbe7df36e387f346d5b03b55815703c50ece797c", "branch" : [ { "SHA1" : "fbe7df36e387f346d5b03b55815703c50ece797c", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "fbe7df36e387f346d5b03b55815703c50ece797c", "branch" : [ { "SHA1" : "fbe7df36e387f346d5b03b55815703c50ece797c", "name" : "origin/dev" } ] } }, "origin/feat_lon_decision_truck" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 349, "buildResult" : None, "marked" : { "SHA1" : "4da7dc06e0cdbdf2775ee0c8405444620d1884fc", "branch" : [ { "SHA1" : "4da7dc06e0cdbdf2775ee0c8405444620d1884fc", "name" : "origin/feat_lon_decision_truck" } ] }, "revision" : { "SHA1" : "4da7dc06e0cdbdf2775ee0c8405444620d1884fc", "branch" : [ { "SHA1" : "4da7dc06e0cdbdf2775ee0c8405444620d1884fc", "name" : "origin/feat_lon_decision_truck" } ] } }, "origin/feat_cargo_width" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 746, "buildResult" : None, "marked" : { "SHA1" : "1dd97a8796a9d1f8ec58942c1b6337c71e188a10", "branch" : [ { "SHA1" : "1dd97a8796a9d1f8ec58942c1b6337c71e188a10", "name" : "origin/feat_cargo_width" } ] }, "revision" : { "SHA1" : "1dd97a8796a9d1f8ec58942c1b6337c71e188a10", "branch" : [ { "SHA1" : "1dd97a8796a9d1f8ec58942c1b6337c71e188a10", "name" : "origin/feat_cargo_width" } ] } }, "origin/feat-hdmap" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 561, "buildResult" : None, "marked" : { "SHA1" : "acafb85ab337307fff986459badad9400ac58c93", "branch" : [ { "SHA1" : "acafb85ab337307fff986459badad9400ac58c93", "name" : "origin/feat-hdmap" } ] }, "revision" : { "SHA1" : "acafb85ab337307fff986459badad9400ac58c93", "branch" : [ { "SHA1" : "acafb85ab337307fff986459badad9400ac58c93", "name" : "origin/feat-hdmap" } ] } }, "origin/feat_clear_route_data" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 108, "buildResult" : None, "marked" : { "SHA1" : "c141b65606a92b49ccc52571712b19fe22286873", "branch" : [ { "SHA1" : "c141b65606a92b49ccc52571712b19fe22286873", "name" : "origin/feat_clear_route_data" } ] }, "revision" : { "SHA1" : "c141b65606a92b49ccc52571712b19fe22286873", "branch" : [ { "SHA1" : "c141b65606a92b49ccc52571712b19fe22286873", "name" : "origin/feat_clear_route_data" } ] } }, "origin/temp_hfsm" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 437, "buildResult" : None, "marked" : { "SHA1" : "ddee85ec821243f9bd15fd2307b5e74763b61f78", "branch" : [ { "SHA1" : "ddee85ec821243f9bd15fd2307b5e74763b61f78", "name" : "origin/temp_hfsm" } ] }, "revision" : { "SHA1" : "ddee85ec821243f9bd15fd2307b5e74763b61f78", "branch" : [ { "SHA1" : "ddee85ec821243f9bd15fd2307b5e74763b61f78", "name" : "origin/temp_hfsm" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 599, "buildResult" : None, "marked" : { "SHA1" : "5be0f5cc1941e42d9207b40d1cf0eca77f2f35c7", "branch" : [ { "SHA1" : "5be0f5cc1941e42d9207b40d1cf0eca77f2f35c7", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "5be0f5cc1941e42d9207b40d1cf0eca77f2f35c7", "branch" : [ { "SHA1" : "5be0f5cc1941e42d9207b40d1cf0eca77f2f35c7", "name" : "origin/rc_dev" } ] } }, "origin/test_path_operation" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 450, "buildResult" : None, "marked" : { "SHA1" : "d2160a2ae7e89f51e990007532b19ae98a40a390", "branch" : [ { "SHA1" : "d2160a2ae7e89f51e990007532b19ae98a40a390", "name" : "origin/test_path_operation" } ] }, "revision" : { "SHA1" : "d2160a2ae7e89f51e990007532b19ae98a40a390", "branch" : [ { "SHA1" : "d2160a2ae7e89f51e990007532b19ae98a40a390", "name" : "origin/test_path_operation" } ] } }, "origin/feat_side_pass" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 589, "buildResult" : None, "marked" : { "SHA1" : "5aade84176eb324a93316337586b72c3170367ac", "branch" : [ { "SHA1" : "5aade84176eb324a93316337586b72c3170367ac", "name" : "origin/feat_side_pass" } ] }, "revision" : { "SHA1" : "5aade84176eb324a93316337586b72c3170367ac", "branch" : [ { "SHA1" : "5aade84176eb324a93316337586b72c3170367ac", "name" : "origin/feat_side_pass" } ] } }, "origin/feat_qg_ssep" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 667, "buildResult" : None, "marked" : { "SHA1" : "b8183cc524608aa57116151c3a94876104092c1c", "branch" : [ { "SHA1" : "b8183cc524608aa57116151c3a94876104092c1c", "name" : "origin/feat_qg_ssep" } ] }, "revision" : { "SHA1" : "b8183cc524608aa57116151c3a94876104092c1c", "branch" : [ { "SHA1" : "b8183cc524608aa57116151c3a94876104092c1c", "name" : "origin/feat_qg_ssep" } ] } }, "origin/feat_black_lane" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 310, "buildResult" : None, "marked" : { "SHA1" : "b730f665aec79d9614fb940f777a6a8b6909fafc", "branch" : [ { "SHA1" : "b730f665aec79d9614fb940f777a6a8b6909fafc", "name" : "origin/feat_black_lane" } ] }, "revision" : { "SHA1" : "b730f665aec79d9614fb940f777a6a8b6909fafc", "branch" : [ { "SHA1" : "b730f665aec79d9614fb940f777a6a8b6909fafc", "name" : "origin/feat_black_lane" } ] } }, "origin/tmp_block_test" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 491, "buildResult" : None, "marked" : { "SHA1" : "1e4abacecb5c052231a6bccf539879e7e1e8aff0", "branch" : [ { "SHA1" : "1e4abacecb5c052231a6bccf539879e7e1e8aff0", "name" : "origin/tmp_block_test" } ] }, "revision" : { "SHA1" : "1e4abacecb5c052231a6bccf539879e7e1e8aff0", "branch" : [ { "SHA1" : "1e4abacecb5c052231a6bccf539879e7e1e8aff0", "name" : "origin/tmp_block_test" } ] } }, "origin/feat-ssep-new-tt-searcher" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 745, "buildResult" : None, "marked" : { "SHA1" : "28cad6275866e53826ad2038adddc1ce69be1f8d", "branch" : [ { "SHA1" : "28cad6275866e53826ad2038adddc1ce69be1f8d", "name" : "origin/feat-ssep-new-tt-searcher" } ] }, "revision" : { "SHA1" : "28cad6275866e53826ad2038adddc1ce69be1f8d", "branch" : [ { "SHA1" : "28cad6275866e53826ad2038adddc1ce69be1f8d", "name" : "origin/feat-ssep-new-tt-searcher" } ] } }, "origin/ssep-improve-latency" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 689, "buildResult" : None, "marked" : { "SHA1" : "cce2893468756a73fa5c22ce00801cdb263554ac", "branch" : [ { "SHA1" : "cce2893468756a73fa5c22ce00801cdb263554ac", "name" : "origin/ssep-improve-latency" } ] }, "revision" : { "SHA1" : "cce2893468756a73fa5c22ce00801cdb263554ac", "branch" : [ { "SHA1" : "cce2893468756a73fa5c22ce00801cdb263554ac", "name" : "origin/ssep-improve-latency" } ] } }, "origin/feat_wbca_truck" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 630, "buildResult" : None, "marked" : { "SHA1" : "7711910408e3e7ef1de5f203853e54acaef018ef", "branch" : [ { "SHA1" : "7711910408e3e7ef1de5f203853e54acaef018ef", "name" : "origin/feat_wbca_truck" } ] }, "revision" : { "SHA1" : "7711910408e3e7ef1de5f203853e54acaef018ef", "branch" : [ { "SHA1" : "7711910408e3e7ef1de5f203853e54acaef018ef", "name" : "origin/feat_wbca_truck" } ] } }, "origin/feat_imv_pull_over" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 803, "buildResult" : None, "marked" : { "SHA1" : "069ea6786697010789b21ee0541a48cd1b5b3bb9", "branch" : [ { "SHA1" : "069ea6786697010789b21ee0541a48cd1b5b3bb9", "name" : "origin/feat_imv_pull_over" } ] }, "revision" : { "SHA1" : "069ea6786697010789b21ee0541a48cd1b5b3bb9", "branch" : [ { "SHA1" : "069ea6786697010789b21ee0541a48cd1b5b3bb9", "name" : "origin/feat_imv_pull_over" } ] } }, "origin/feat_hdmap_dynamic_sidepass" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 584, "buildResult" : None, "marked" : { "SHA1" : "0f7418eda78cbdf13cffdd5c265f7a163643ca68", "branch" : [ { "SHA1" : "0f7418eda78cbdf13cffdd5c265f7a163643ca68", "name" : "origin/feat_hdmap_dynamic_sidepass" } ] }, "revision" : { "SHA1" : "0f7418eda78cbdf13cffdd5c265f7a163643ca68", "branch" : [ { "SHA1" : "0f7418eda78cbdf13cffdd5c265f7a163643ca68", "name" : "origin/feat_hdmap_dynamic_sidepass" } ] } }, "origin/feat_qiangang_ssep_heatnet" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 827, "buildResult" : None, "marked" : { "SHA1" : "210669ef8898b68ce49d8764f782892fea07a214", "branch" : [ { "SHA1" : "210669ef8898b68ce49d8764f782892fea07a214", "name" : "origin/feat_qiangang_ssep_heatnet" } ] }, "revision" : { "SHA1" : "210669ef8898b68ce49d8764f782892fea07a214", "branch" : [ { "SHA1" : "210669ef8898b68ce49d8764f782892fea07a214", "name" : "origin/feat_qiangang_ssep_heatnet" } ] } }, "origin/feat_truck_reverse" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 679, "buildResult" : None, "marked" : { "SHA1" : "fcf33f9b2c1d15fba9ec89be86e39e6859bc1c3f", "branch" : [ { "SHA1" : "fcf33f9b2c1d15fba9ec89be86e39e6859bc1c3f", "name" : "origin/feat_truck_reverse" } ] }, "revision" : { "SHA1" : "fcf33f9b2c1d15fba9ec89be86e39e6859bc1c3f", "branch" : [ { "SHA1" : "fcf33f9b2c1d15fba9ec89be86e39e6859bc1c3f", "name" : "origin/feat_truck_reverse" } ] } }, "origin/ex_lane_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 352, "buildResult" : None, "marked" : { "SHA1" : "f79ecf4d1b345598b99343ef9706d8266821b994", "branch" : [ { "SHA1" : "f79ecf4d1b345598b99343ef9706d8266821b994", "name" : "origin/ex_lane_change" } ] }, "revision" : { "SHA1" : "f79ecf4d1b345598b99343ef9706d8266821b994", "branch" : [ { "SHA1" : "f79ecf4d1b345598b99343ef9706d8266821b994", "name" : "origin/ex_lane_change" } ] } }, "origin/feat_sink_snapshot" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 453, "buildResult" : None, "marked" : { "SHA1" : "fd2523e18b91d9d47e81c724e96a1788547dbe83", "branch" : [ { "SHA1" : "fd2523e18b91d9d47e81c724e96a1788547dbe83", "name" : "origin/feat_sink_snapshot" } ] }, "revision" : { "SHA1" : "fd2523e18b91d9d47e81c724e96a1788547dbe83", "branch" : [ { "SHA1" : "fd2523e18b91d9d47e81c724e96a1788547dbe83", "name" : "origin/feat_sink_snapshot" } ] } }, "origin/feat_remote" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 804, "buildResult" : None, "marked" : { "SHA1" : "4419f5005346efc02ca435aa2236e5af31d0666c", "branch" : [ { "SHA1" : "4419f5005346efc02ca435aa2236e5af31d0666c", "name" : "origin/feat_remote" } ] }, "revision" : { "SHA1" : "4419f5005346efc02ca435aa2236e5af31d0666c", "branch" : [ { "SHA1" : "4419f5005346efc02ca435aa2236e5af31d0666c", "name" : "origin/feat_remote" } ] } }, "origin/feat_change_1" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 510, "buildResult" : None, "marked" : { "SHA1" : "15093f88caa59010878486fa7cd3704202deb3e7", "branch" : [ { "SHA1" : "15093f88caa59010878486fa7cd3704202deb3e7", "name" : "origin/feat_change_1" } ] }, "revision" : { "SHA1" : "15093f88caa59010878486fa7cd3704202deb3e7", "branch" : [ { "SHA1" : "15093f88caa59010878486fa7cd3704202deb3e7", "name" : "origin/feat_change_1" } ] } }, "origin/test4" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 71, "buildResult" : None, "marked" : { "SHA1" : "3a0f01f061fb0345de0de1a5e5341f7b502cae2a", "branch" : [ { "SHA1" : "3a0f01f061fb0345de0de1a5e5341f7b502cae2a", "name" : "origin/test4" } ] }, "revision" : { "SHA1" : "3a0f01f061fb0345de0de1a5e5341f7b502cae2a", "branch" : [ { "SHA1" : "3a0f01f061fb0345de0de1a5e5341f7b502cae2a", "name" : "origin/test4" } ] } }, "origin/feat_entrance" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 731, "buildResult" : None, "marked" : { "SHA1" : "d2fcc7874b1f1f44404bddb92b18821f3fba9add", "branch" : [ { "SHA1" : "d2fcc7874b1f1f44404bddb92b18821f3fba9add", "name" : "origin/feat_entrance" } ] }, "revision" : { "SHA1" : "d2fcc7874b1f1f44404bddb92b18821f3fba9add", "branch" : [ { "SHA1" : "d2fcc7874b1f1f44404bddb92b18821f3fba9add", "name" : "origin/feat_entrance" } ] } }, "origin/test3" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 168, "buildResult" : None, "marked" : { "SHA1" : "fbd459e064ae43baaa8e4645b3c0310bb71f3c12", "branch" : [ { "SHA1" : "fbd459e064ae43baaa8e4645b3c0310bb71f3c12", "name" : "origin/test3" } ] }, "revision" : { "SHA1" : "fbd459e064ae43baaa8e4645b3c0310bb71f3c12", "branch" : [ { "SHA1" : "fbd459e064ae43baaa8e4645b3c0310bb71f3c12", "name" : "origin/test3" } ] } }, "origin/test6" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 99, "buildResult" : None, "marked" : { "SHA1" : "7f3ae0cef35acba9c6a13cde29b660827b4d3084", "branch" : [ { "SHA1" : "7f3ae0cef35acba9c6a13cde29b660827b4d3084", "name" : "origin/test6" } ] }, "revision" : { "SHA1" : "7f3ae0cef35acba9c6a13cde29b660827b4d3084", "branch" : [ { "SHA1" : "7f3ae0cef35acba9c6a13cde29b660827b4d3084", "name" : "origin/test6" } ] } }, "origin/feat_wbca_imv" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 611, "buildResult" : None, "marked" : { "SHA1" : "afe647195c9065ee88cbadda207a5a5e5730d927", "branch" : [ { "SHA1" : "afe647195c9065ee88cbadda207a5a5e5730d927", "name" : "origin/feat_wbca_imv" } ] }, "revision" : { "SHA1" : "afe647195c9065ee88cbadda207a5a5e5730d927", "branch" : [ { "SHA1" : "afe647195c9065ee88cbadda207a5a5e5730d927", "name" : "origin/feat_wbca_imv" } ] } }, "origin/test11" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 7, "buildResult" : None, "marked" : { "SHA1" : "bb3cc4198b8f9244806db9feec15bfe6f22032e3", "branch" : [ { "SHA1" : "bb3cc4198b8f9244806db9feec15bfe6f22032e3", "name" : "origin/test11" } ] }, "revision" : { "SHA1" : "bb3cc4198b8f9244806db9feec15bfe6f22032e3", "branch" : [ { "SHA1" : "bb3cc4198b8f9244806db9feec15bfe6f22032e3", "name" : "origin/test11" } ] } }, "origin/test5" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 109, "buildResult" : None, "marked" : { "SHA1" : "e7c3d98921bf7fd4291229aeecdcf7fa1fa959fb", "branch" : [ { "SHA1" : "e7c3d98921bf7fd4291229aeecdcf7fa1fa959fb", "name" : "origin/test5" } ] }, "revision" : { "SHA1" : "e7c3d98921bf7fd4291229aeecdcf7fa1fa959fb", "branch" : [ { "SHA1" : "e7c3d98921bf7fd4291229aeecdcf7fa1fa959fb", "name" : "origin/test5" } ] } }, "origin/feat_block_data_switch" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 717, "buildResult" : None, "marked" : { "SHA1" : "bcb9d836d737396fa512a0070e081ac75391c320", "branch" : [ { "SHA1" : "bcb9d836d737396fa512a0070e081ac75391c320", "name" : "origin/feat_block_data_switch" } ] }, "revision" : { "SHA1" : "bcb9d836d737396fa512a0070e081ac75391c320", "branch" : [ { "SHA1" : "bcb9d836d737396fa512a0070e081ac75391c320", "name" : "origin/feat_block_data_switch" } ] } }, "origin/dev_ph_test_lane_change_new" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 101, "buildResult" : None, "marked" : { "SHA1" : "c63d1960ccf27e835e23157157b281da8479226f", "branch" : [ { "SHA1" : "c63d1960ccf27e835e23157157b281da8479226f", "name" : "origin/dev_ph_test_lane_change_new" } ] }, "revision" : { "SHA1" : "c63d1960ccf27e835e23157157b281da8479226f", "branch" : [ { "SHA1" : "c63d1960ccf27e835e23157157b281da8479226f", "name" : "origin/dev_ph_test_lane_change_new" } ] } }, "origin/feat_pnc_target" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 677, "buildResult" : None, "marked" : { "SHA1" : "72a511e7cc86d80e1636ce648fa7a5d11559afb5", "branch" : [ { "SHA1" : "72a511e7cc86d80e1636ce648fa7a5d11559afb5", "name" : "origin/feat_pnc_target" } ] }, "revision" : { "SHA1" : "72a511e7cc86d80e1636ce648fa7a5d11559afb5", "branch" : [ { "SHA1" : "72a511e7cc86d80e1636ce648fa7a5d11559afb5", "name" : "origin/feat_pnc_target" } ] } }, "origin/feat_seg_route" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 295, "buildResult" : None, "marked" : { "SHA1" : "0f2dd47dec14cd49d299bbc6ce7318af268a1f57", "branch" : [ { "SHA1" : "0f2dd47dec14cd49d299bbc6ce7318af268a1f57", "name" : "origin/feat_seg_route" } ] }, "revision" : { "SHA1" : "0f2dd47dec14cd49d299bbc6ce7318af268a1f57", "branch" : [ { "SHA1" : "0f2dd47dec14cd49d299bbc6ce7318af268a1f57", "name" : "origin/feat_seg_route" } ] } }, "origin/feat_up_down" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 210, "buildResult" : None, "marked" : { "SHA1" : "b0fde22b207d8b2a0037c919174cdefa94f4fdab", "branch" : [ { "SHA1" : "b0fde22b207d8b2a0037c919174cdefa94f4fdab", "name" : "origin/feat_up_down" } ] }, "revision" : { "SHA1" : "b0fde22b207d8b2a0037c919174cdefa94f4fdab", "branch" : [ { "SHA1" : "b0fde22b207d8b2a0037c919174cdefa94f4fdab", "name" : "origin/feat_up_down" } ] } }, "origin/feat_ctl_sink" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 457, "buildResult" : None, "marked" : { "SHA1" : "3f3cccee7acfd8a12f1adeddf5ba89ee9b0fbd6f", "branch" : [ { "SHA1" : "3f3cccee7acfd8a12f1adeddf5ba89ee9b0fbd6f", "name" : "origin/feat_ctl_sink" } ] }, "revision" : { "SHA1" : "3f3cccee7acfd8a12f1adeddf5ba89ee9b0fbd6f", "branch" : [ { "SHA1" : "3f3cccee7acfd8a12f1adeddf5ba89ee9b0fbd6f", "name" : "origin/feat_ctl_sink" } ] } }, "origin/tmp_lon_decision_3" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 409, "buildResult" : None, "marked" : { "SHA1" : "ebd9eb0b5f884f9afc085e7f93d80aba8f093bb3", "branch" : [ { "SHA1" : "ebd9eb0b5f884f9afc085e7f93d80aba8f093bb3", "name" : "origin/tmp_lon_decision_3" } ] }, "revision" : { "SHA1" : "ebd9eb0b5f884f9afc085e7f93d80aba8f093bb3", "branch" : [ { "SHA1" : "ebd9eb0b5f884f9afc085e7f93d80aba8f093bb3", "name" : "origin/tmp_lon_decision_3" } ] } }, "origin/test_lon_decision" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 431, "buildResult" : None, "marked" : { "SHA1" : "63db554b6b9af2f33a046d25c11b613d4a3cac5a", "branch" : [ { "SHA1" : "63db554b6b9af2f33a046d25c11b613d4a3cac5a", "name" : "origin/test_lon_decision" } ] }, "revision" : { "SHA1" : "63db554b6b9af2f33a046d25c11b613d4a3cac5a", "branch" : [ { "SHA1" : "63db554b6b9af2f33a046d25c11b613d4a3cac5a", "name" : "origin/test_lon_decision" } ] } }, "origin/tmp_lon_decision_2" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 382, "buildResult" : None, "marked" : { "SHA1" : "2eb7e0d6dbdd384b219c1804b159953dae3d290f", "branch" : [ { "SHA1" : "2eb7e0d6dbdd384b219c1804b159953dae3d290f", "name" : "origin/tmp_lon_decision_2" } ] }, "revision" : { "SHA1" : "2eb7e0d6dbdd384b219c1804b159953dae3d290f", "branch" : [ { "SHA1" : "2eb7e0d6dbdd384b219c1804b159953dae3d290f", "name" : "origin/tmp_lon_decision_2" } ] } }, "origin/feat_trajectory" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "207061ce9e0d5520d8e3aa25e71f15ab72f5af63", "branch" : [ { "SHA1" : "207061ce9e0d5520d8e3aa25e71f15ab72f5af63", "name" : "origin/feat_trajectory" } ] }, "revision" : { "SHA1" : "207061ce9e0d5520d8e3aa25e71f15ab72f5af63", "branch" : [ { "SHA1" : "207061ce9e0d5520d8e3aa25e71f15ab72f5af63", "name" : "origin/feat_trajectory" } ] } }, "origin/feat_below_plane" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 696, "buildResult" : None, "marked" : { "SHA1" : "c9ebfad01a127e5898e2888f4c23c52bf6bd47a5", "branch" : [ { "SHA1" : "c9ebfad01a127e5898e2888f4c23c52bf6bd47a5", "name" : "origin/feat_below_plane" } ] }, "revision" : { "SHA1" : "c9ebfad01a127e5898e2888f4c23c52bf6bd47a5", "branch" : [ { "SHA1" : "c9ebfad01a127e5898e2888f4c23c52bf6bd47a5", "name" : "origin/feat_below_plane" } ] } }, "origin/devel_lon_decisionV2_simulation" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 342, "buildResult" : None, "marked" : { "SHA1" : "d095677ca7a33e53ebeb854c436c36d20469fe4f", "branch" : [ { "SHA1" : "d095677ca7a33e53ebeb854c436c36d20469fe4f", "name" : "origin/devel_lon_decisionV2_simulation" } ] }, "revision" : { "SHA1" : "d095677ca7a33e53ebeb854c436c36d20469fe4f", "branch" : [ { "SHA1" : "d095677ca7a33e53ebeb854c436c36d20469fe4f", "name" : "origin/devel_lon_decisionV2_simulation" } ] } }, "origin/feat_remote_open_space" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 810, "buildResult" : None, "marked" : { "SHA1" : "e144a3fa9d9dc5d60f442f1886c83d42cdd6f6d2", "branch" : [ { "SHA1" : "e144a3fa9d9dc5d60f442f1886c83d42cdd6f6d2", "name" : "origin/feat_remote_open_space" } ] }, "revision" : { "SHA1" : "e144a3fa9d9dc5d60f442f1886c83d42cdd6f6d2", "branch" : [ { "SHA1" : "e144a3fa9d9dc5d60f442f1886c83d42cdd6f6d2", "name" : "origin/feat_remote_open_space" } ] } }, "origin/feat_dynamic_bridge" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 555, "buildResult" : None, "marked" : { "SHA1" : "4656941b18dd1c95add7e09d983e98a4bf7f3d28", "branch" : [ { "SHA1" : "4656941b18dd1c95add7e09d983e98a4bf7f3d28", "name" : "origin/feat_dynamic_bridge" } ] }, "revision" : { "SHA1" : "4656941b18dd1c95add7e09d983e98a4bf7f3d28", "branch" : [ { "SHA1" : "4656941b18dd1c95add7e09d983e98a4bf7f3d28", "name" : "origin/feat_dynamic_bridge" } ] } }, "origin/devel_ex_obj" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 378, "buildResult" : None, "marked" : { "SHA1" : "9fe202eeb9b3047c55375d0d94f3303281519e68", "branch" : [ { "SHA1" : "9fe202eeb9b3047c55375d0d94f3303281519e68", "name" : "origin/devel_ex_obj" } ] }, "revision" : { "SHA1" : "9fe202eeb9b3047c55375d0d94f3303281519e68", "branch" : [ { "SHA1" : "9fe202eeb9b3047c55375d0d94f3303281519e68", "name" : "origin/devel_ex_obj" } ] } }, "origin/modify_lane_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 383, "buildResult" : None, "marked" : { "SHA1" : "af04d52e2ad1a3e8b8e6785945980bb1396b7620", "branch" : [ { "SHA1" : "af04d52e2ad1a3e8b8e6785945980bb1396b7620", "name" : "origin/modify_lane_change" } ] }, "revision" : { "SHA1" : "af04d52e2ad1a3e8b8e6785945980bb1396b7620", "branch" : [ { "SHA1" : "af04d52e2ad1a3e8b8e6785945980bb1396b7620", "name" : "origin/modify_lane_change" } ] } }, "origin/tmp_LD4_snapshot" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 445, "buildResult" : None, "marked" : { "SHA1" : "11fc49246be79eaca5468550871e39e53b9d2c10", "branch" : [ { "SHA1" : "11fc49246be79eaca5468550871e39e53b9d2c10", "name" : "origin/tmp_LD4_snapshot" } ] }, "revision" : { "SHA1" : "11fc49246be79eaca5468550871e39e53b9d2c10", "branch" : [ { "SHA1" : "11fc49246be79eaca5468550871e39e53b9d2c10", "name" : "origin/tmp_LD4_snapshot" } ] } }, "origin/feat_yard_decider" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 604, "buildResult" : None, "marked" : { "SHA1" : "9b6eb3039399db13fedded25fa6e7d42234df2f8", "branch" : [ { "SHA1" : "9b6eb3039399db13fedded25fa6e7d42234df2f8", "name" : "origin/feat_yard_decider" } ] }, "revision" : { "SHA1" : "9b6eb3039399db13fedded25fa6e7d42234df2f8", "branch" : [ { "SHA1" : "9b6eb3039399db13fedded25fa6e7d42234df2f8", "name" : "origin/feat_yard_decider" } ] } }, "origin/feat_safety_check" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 615, "buildResult" : None, "marked" : { "SHA1" : "48ed6b4738aaafd6bb7e364c3108414f6f459227", "branch" : [ { "SHA1" : "48ed6b4738aaafd6bb7e364c3108414f6f459227", "name" : "origin/feat_safety_check" } ] }, "revision" : { "SHA1" : "48ed6b4738aaafd6bb7e364c3108414f6f459227", "branch" : [ { "SHA1" : "48ed6b4738aaafd6bb7e364c3108414f6f459227", "name" : "origin/feat_safety_check" } ] } }, "origin/feat_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 481, "buildResult" : None, "marked" : { "SHA1" : "36ebe249532fe65cc6520e2ce69acb9908a55b0f", "branch" : [ { "SHA1" : "36ebe249532fe65cc6520e2ce69acb9908a55b0f", "name" : "origin/feat_change" } ] }, "revision" : { "SHA1" : "36ebe249532fe65cc6520e2ce69acb9908a55b0f", "branch" : [ { "SHA1" : "36ebe249532fe65cc6520e2ce69acb9908a55b0f", "name" : "origin/feat_change" } ] } }, "origin/feat-ssep-add-hd-map" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 722, "buildResult" : None, "marked" : { "SHA1" : "2632d09a428da5a46a04b621f4f6f72632646542", "branch" : [ { "SHA1" : "2632d09a428da5a46a04b621f4f6f72632646542", "name" : "origin/feat-ssep-add-hd-map" } ] }, "revision" : { "SHA1" : "2632d09a428da5a46a04b621f4f6f72632646542", "branch" : [ { "SHA1" : "2632d09a428da5a46a04b621f4f6f72632646542", "name" : "origin/feat-ssep-add-hd-map" } ] } }, "origin/dev_lon_decision" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 262, "buildResult" : None, "marked" : { "SHA1" : "0478658dcd25c868aa519df5722fabca6cc74638", "branch" : [ { "SHA1" : "0478658dcd25c868aa519df5722fabca6cc74638", "name" : "origin/dev_lon_decision" } ] }, "revision" : { "SHA1" : "0478658dcd25c868aa519df5722fabca6cc74638", "branch" : [ { "SHA1" : "0478658dcd25c868aa519df5722fabca6cc74638", "name" : "origin/dev_lon_decision" } ] } }, "origin/feat_boundary_type" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 521, "buildResult" : None, "marked" : { "SHA1" : "a7011864c5dd8352e99def130a7c0b4030c6f11a", "branch" : [ { "SHA1" : "a7011864c5dd8352e99def130a7c0b4030c6f11a", "name" : "origin/feat_boundary_type" } ] }, "revision" : { "SHA1" : "a7011864c5dd8352e99def130a7c0b4030c6f11a", "branch" : [ { "SHA1" : "a7011864c5dd8352e99def130a7c0b4030c6f11a", "name" : "origin/feat_boundary_type" } ] } }, "origin/cloud_1" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 34, "buildResult" : None, "marked" : { "SHA1" : "94566d8dce0cd9dd7d5c7b8189ca55f423de99df", "branch" : [ { "SHA1" : "94566d8dce0cd9dd7d5c7b8189ca55f423de99df", "name" : "origin/cloud_1" } ] }, "revision" : { "SHA1" : "94566d8dce0cd9dd7d5c7b8189ca55f423de99df", "branch" : [ { "SHA1" : "94566d8dce0cd9dd7d5c7b8189ca55f423de99df", "name" : "origin/cloud_1" } ] } }, "origin/feat_wbca_truck_dp" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 642, "buildResult" : None, "marked" : { "SHA1" : "657e2b0b15972fd4c69412c6557a8a49f930363c", "branch" : [ { "SHA1" : "657e2b0b15972fd4c69412c6557a8a49f930363c", "name" : "origin/feat_wbca_truck_dp" } ] }, "revision" : { "SHA1" : "657e2b0b15972fd4c69412c6557a8a49f930363c", "branch" : [ { "SHA1" : "657e2b0b15972fd4c69412c6557a8a49f930363c", "name" : "origin/feat_wbca_truck_dp" } ] } }, "origin/feat_park" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 743, "buildResult" : None, "marked" : { "SHA1" : "637bcb3a4d6338d67668b38c729b42d4953e675c", "branch" : [ { "SHA1" : "637bcb3a4d6338d67668b38c729b42d4953e675c", "name" : "origin/feat_park" } ] }, "revision" : { "SHA1" : "637bcb3a4d6338d67668b38c729b42d4953e675c", "branch" : [ { "SHA1" : "637bcb3a4d6338d67668b38c729b42d4953e675c", "name" : "origin/feat_park" } ] } }, "origin/feat_traffic_light" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 344, "buildResult" : None, "marked" : { "SHA1" : "48f144ae52a9b21881be745593c87d9389a42732", "branch" : [ { "SHA1" : "48f144ae52a9b21881be745593c87d9389a42732", "name" : "origin/feat_traffic_light" } ] }, "revision" : { "SHA1" : "48f144ae52a9b21881be745593c87d9389a42732", "branch" : [ { "SHA1" : "48f144ae52a9b21881be745593c87d9389a42732", "name" : "origin/feat_traffic_light" } ] } }, "origin/feat_centerline_sink" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 471, "buildResult" : None, "marked" : { "SHA1" : "e330656a6e0842455977d0a2cc3762960f11e4a1", "branch" : [ { "SHA1" : "e330656a6e0842455977d0a2cc3762960f11e4a1", "name" : "origin/feat_centerline_sink" } ] }, "revision" : { "SHA1" : "e330656a6e0842455977d0a2cc3762960f11e4a1", "branch" : [ { "SHA1" : "e330656a6e0842455977d0a2cc3762960f11e4a1", "name" : "origin/feat_centerline_sink" } ] } }, "origin/tmp_lon4_shanpshot" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 423, "buildResult" : None, "marked" : { "SHA1" : "a2ec23de78135dae555b625c4277d65fd8d76263", "branch" : [ { "SHA1" : "a2ec23de78135dae555b625c4277d65fd8d76263", "name" : "origin/tmp_lon4_shanpshot" } ] }, "revision" : { "SHA1" : "a2ec23de78135dae555b625c4277d65fd8d76263", "branch" : [ { "SHA1" : "a2ec23de78135dae555b625c4277d65fd8d76263", "name" : "origin/tmp_lon4_shanpshot" } ] } }, "origin/dev_lon_decisionV2" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 385, "buildResult" : None, "marked" : { "SHA1" : "8acb7d2bb4762c46863bbce39699957378a5af77", "branch" : [ { "SHA1" : "8acb7d2bb4762c46863bbce39699957378a5af77", "name" : "origin/dev_lon_decisionV2" } ] }, "revision" : { "SHA1" : "8acb7d2bb4762c46863bbce39699957378a5af77", "branch" : [ { "SHA1" : "8acb7d2bb4762c46863bbce39699957378a5af77", "name" : "origin/dev_lon_decisionV2" } ] } }, "origin/crane_stop_optmize" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 277, "buildResult" : None, "marked" : { "SHA1" : "b4c2f1b54107d66f7501de74a2dfdc7ec5cb2f02", "branch" : [ { "SHA1" : "b4c2f1b54107d66f7501de74a2dfdc7ec5cb2f02", "name" : "origin/crane_stop_optmize" } ] }, "revision" : { "SHA1" : "b4c2f1b54107d66f7501de74a2dfdc7ec5cb2f02", "branch" : [ { "SHA1" : "b4c2f1b54107d66f7501de74a2dfdc7ec5cb2f02", "name" : "origin/crane_stop_optmize" } ] } }, "origin/feat_dead_lock" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 843, "buildResult" : None, "marked" : { "SHA1" : "b88f8d092f0cc52bd9141130b5dd6dd7ef07b0de", "branch" : [ { "SHA1" : "b88f8d092f0cc52bd9141130b5dd6dd7ef07b0de", "name" : "origin/feat_dead_lock" } ] }, "revision" : { "SHA1" : "b88f8d092f0cc52bd9141130b5dd6dd7ef07b0de", "branch" : [ { "SHA1" : "b88f8d092f0cc52bd9141130b5dd6dd7ef07b0de", "name" : "origin/feat_dead_lock" } ] } }, "origin/feat_qiangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 800, "buildResult" : None, "marked" : { "SHA1" : "974af97bca0fbf8ad48dcb148435bb05c5e3b6c9", "branch" : [ { "SHA1" : "974af97bca0fbf8ad48dcb148435bb05c5e3b6c9", "name" : "origin/feat_qiangang" } ] }, "revision" : { "SHA1" : "974af97bca0fbf8ad48dcb148435bb05c5e3b6c9", "branch" : [ { "SHA1" : "974af97bca0fbf8ad48dcb148435bb05c5e3b6c9", "name" : "origin/feat_qiangang" } ] } }, "origin/devel_test_ph_mult_lane_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 266, "buildResult" : None, "marked" : { "SHA1" : "6583772fc4cc12937808ab321f863abb4bc18046", "branch" : [ { "SHA1" : "6583772fc4cc12937808ab321f863abb4bc18046", "name" : "origin/devel_test_ph_mult_lane_change" } ] }, "revision" : { "SHA1" : "6583772fc4cc12937808ab321f863abb4bc18046", "branch" : [ { "SHA1" : "6583772fc4cc12937808ab321f863abb4bc18046", "name" : "origin/devel_test_ph_mult_lane_change" } ] } }, "origin/dev_ph_test_lane_change" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 53, "buildResult" : None, "marked" : { "SHA1" : "8635f4d8133cd7d5c2d7a44087757db58fd9bca1", "branch" : [ { "SHA1" : "8635f4d8133cd7d5c2d7a44087757db58fd9bca1", "name" : "origin/dev_ph_test_lane_change" } ] }, "revision" : { "SHA1" : "8635f4d8133cd7d5c2d7a44087757db58fd9bca1", "branch" : [ { "SHA1" : "8635f4d8133cd7d5c2d7a44087757db58fd9bca1", "name" : "origin/dev_ph_test_lane_change" } ] } }, "origin/tmp_LD4_shanpshot" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 436, "buildResult" : None, "marked" : { "SHA1" : "d2cbbbf572256f1209b574d3bd316fce794586d6", "branch" : [ { "SHA1" : "d2cbbbf572256f1209b574d3bd316fce794586d6", "name" : "origin/tmp_LD4_shanpshot" } ] }, "revision" : { "SHA1" : "d2cbbbf572256f1209b574d3bd316fce794586d6", "branch" : [ { "SHA1" : "d2cbbbf572256f1209b574d3bd316fce794586d6", "name" : "origin/tmp_LD4_shanpshot" } ] } }, "origin/cloudtest2" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 11, "buildResult" : None, "marked" : { "SHA1" : "7bc03253ad081c01c3fb222525ce87850910fee3", "branch" : [ { "SHA1" : "7bc03253ad081c01c3fb222525ce87850910fee3", "name" : "origin/cloudtest2" } ] }, "revision" : { "SHA1" : "7bc03253ad081c01c3fb222525ce87850910fee3", "branch" : [ { "SHA1" : "7bc03253ad081c01c3fb222525ce87850910fee3", "name" : "origin/cloudtest2" } ] } }, "origin/feat_hfsm" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 464, "buildResult" : None, "marked" : { "SHA1" : "0a443939715c85ef2371ed1f8c58bab4716db008", "branch" : [ { "SHA1" : "0a443939715c85ef2371ed1f8c58bab4716db008", "name" : "origin/feat_hfsm" } ] }, "revision" : { "SHA1" : "0a443939715c85ef2371ed1f8c58bab4716db008", "branch" : [ { "SHA1" : "0a443939715c85ef2371ed1f8c58bab4716db008", "name" : "origin/feat_hfsm" } ] } }, "origin/devel_ph_feat_side_pass" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 332, "buildResult" : None, "marked" : { "SHA1" : "835165d41405a5a1de62a4911016e3a20a47b529", "branch" : [ { "SHA1" : "835165d41405a5a1de62a4911016e3a20a47b529", "name" : "origin/devel_ph_feat_side_pass" } ] }, "revision" : { "SHA1" : "835165d41405a5a1de62a4911016e3a20a47b529", "branch" : [ { "SHA1" : "835165d41405a5a1de62a4911016e3a20a47b529", "name" : "origin/devel_ph_feat_side_pass" } ] } }, "origin/test_hairun" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 373, "buildResult" : None, "marked" : { "SHA1" : "fd8840b9d30d4e277dd8db08957ba72d0dcb565f", "branch" : [ { "SHA1" : "fd8840b9d30d4e277dd8db08957ba72d0dcb565f", "name" : "origin/test_hairun" } ] }, "revision" : { "SHA1" : "fd8840b9d30d4e277dd8db08957ba72d0dcb565f", "branch" : [ { "SHA1" : "fd8840b9d30d4e277dd8db08957ba72d0dcb565f", "name" : "origin/test_hairun" } ] } }, "origin/feat-speed-limit" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 494, "buildResult" : None, "marked" : { "SHA1" : "a0af701f442de90949a2b5724546b49c3224d396", "branch" : [ { "SHA1" : "a0af701f442de90949a2b5724546b49c3224d396", "name" : "origin/feat-speed-limit" } ] }, "revision" : { "SHA1" : "a0af701f442de90949a2b5724546b49c3224d396", "branch" : [ { "SHA1" : "a0af701f442de90949a2b5724546b49c3224d396", "name" : "origin/feat-speed-limit" } ] } }, "origin/feat_qiangang_refactor" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 842, "buildResult" : None, "marked" : { "SHA1" : "4879b69a9f51029cd7680ff4ee98cd7cd6f7758a", "branch" : [ { "SHA1" : "4879b69a9f51029cd7680ff4ee98cd7cd6f7758a", "name" : "origin/feat_qiangang_refactor" } ] }, "revision" : { "SHA1" : "4879b69a9f51029cd7680ff4ee98cd7cd6f7758a", "branch" : [ { "SHA1" : "4879b69a9f51029cd7680ff4ee98cd7cd6f7758a", "name" : "origin/feat_qiangang_refactor" } ] } }, "origin/feat_lock_station" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 708, "buildResult" : None, "marked" : { "SHA1" : "d312c086f8debff7d70d9285d852e7da36f488e1", "branch" : [ { "SHA1" : "d312c086f8debff7d70d9285d852e7da36f488e1", "name" : "origin/feat_lock_station" } ] }, "revision" : { "SHA1" : "d312c086f8debff7d70d9285d852e7da36f488e1", "branch" : [ { "SHA1" : "d312c086f8debff7d70d9285d852e7da36f488e1", "name" : "origin/feat_lock_station" } ] } }, "origin/feat_escape" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 818, "buildResult" : None, "marked" : { "SHA1" : "b17f0d5fb704e33ac5c479ea638e8dc7e745462c", "branch" : [ { "SHA1" : "b17f0d5fb704e33ac5c479ea638e8dc7e745462c", "name" : "origin/feat_escape" } ] }, "revision" : { "SHA1" : "b17f0d5fb704e33ac5c479ea638e8dc7e745462c", "branch" : [ { "SHA1" : "b17f0d5fb704e33ac5c479ea638e8dc7e745462c", "name" : "origin/feat_escape" } ] } }, "origin/modify_lane_change_new" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 407, "buildResult" : None, "marked" : { "SHA1" : "d9d5d87eb8776522a3d896af2d8a5c594a4d95af", "branch" : [ { "SHA1" : "d9d5d87eb8776522a3d896af2d8a5c594a4d95af", "name" : "origin/modify_lane_change_new" } ] }, "revision" : { "SHA1" : "d9d5d87eb8776522a3d896af2d8a5c594a4d95af", "branch" : [ { "SHA1" : "d9d5d87eb8776522a3d896af2d8a5c594a4d95af", "name" : "origin/modify_lane_change_new" } ] } }, "origin/feat_reversing_truck" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 350, "buildResult" : None, "marked" : { "SHA1" : "c67ae47788fc42372af3f47ef077c229241273b3", "branch" : [ { "SHA1" : "c67ae47788fc42372af3f47ef077c229241273b3", "name" : "origin/feat_reversing_truck" } ] }, "revision" : { "SHA1" : "c67ae47788fc42372af3f47ef077c229241273b3", "branch" : [ { "SHA1" : "c67ae47788fc42372af3f47ef077c229241273b3", "name" : "origin/feat_reversing_truck" } ] } } }, "lastBuiltRevision" : { "SHA1" : "207061ce9e0d5520d8e3aa25e71f15ab72f5af63", "branch" : [ { "SHA1" : "207061ce9e0d5520d8e3aa25e71f15ab72f5af63", "name" : "origin/feat_trajectory" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/pnc.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "branch" : [ { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "branch" : [ { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "name" : "origin/rc_dev" } ] } }, "origin/new_temp_branch" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 525, "buildResult" : None, "marked" : { "SHA1" : "40ff437c0c8c21f549e6d7ad8b6491ce2f713a2b", "branch" : [ { "SHA1" : "40ff437c0c8c21f549e6d7ad8b6491ce2f713a2b", "name" : "origin/new_temp_branch" } ] }, "revision" : { "SHA1" : "40ff437c0c8c21f549e6d7ad8b6491ce2f713a2b", "branch" : [ { "SHA1" : "40ff437c0c8c21f549e6d7ad8b6491ce2f713a2b", "name" : "origin/new_temp_branch" } ] } }, "origin/rc_interface" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 46, "buildResult" : None, "marked" : { "SHA1" : "d7a7829428edec0ed1626458e6fad94b72b18419", "branch" : [ { "SHA1" : "d7a7829428edec0ed1626458e6fad94b72b18419", "name" : "origin/rc_interface" } ] }, "revision" : { "SHA1" : "d7a7829428edec0ed1626458e6fad94b72b18419", "branch" : [ { "SHA1" : "d7a7829428edec0ed1626458e6fad94b72b18419", "name" : "origin/rc_interface" } ] } }, "origin/dev_cloud_mq" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 11, "buildResult" : None, "marked" : { "SHA1" : "40f4260415b18d2dd8d6b9bb868f19f0af9fee29", "branch" : [ { "SHA1" : "40f4260415b18d2dd8d6b9bb868f19f0af9fee29", "name" : "origin/dev_cloud_mq" } ] }, "revision" : { "SHA1" : "40f4260415b18d2dd8d6b9bb868f19f0af9fee29", "branch" : [ { "SHA1" : "40f4260415b18d2dd8d6b9bb868f19f0af9fee29", "name" : "origin/dev_cloud_mq" } ] } } }, "lastBuiltRevision" : { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "branch" : [ { "SHA1" : "a9c2e4d796a63e7fae98439c0d76ee577dfdf98f", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/map/hdmap.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "branch" : [ { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "branch" : [ { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "branch" : [ { "SHA1" : "2da8a8e2f3b3c6eeabf913ec6640fdc27ae66c88", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/system-ros.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "b7be5f6192372fcd3edfd44302b0204c1c9d7a59", "branch" : [ { "SHA1" : "b7be5f6192372fcd3edfd44302b0204c1c9d7a59", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "b7be5f6192372fcd3edfd44302b0204c1c9d7a59", "branch" : [ { "SHA1" : "b7be5f6192372fcd3edfd44302b0204c1c9d7a59", "name" : "origin/rc_dev" } ] } }, "origin/feat_escape" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 798, "buildResult" : None, "marked" : { "SHA1" : "e3e0494223dd23e21a2a0f8b0d3039ef42a3a282", "branch" : [ { "SHA1" : "e3e0494223dd23e21a2a0f8b0d3039ef42a3a282", "name" : "origin/feat_escape" } ] }, "revision" : { "SHA1" : "e3e0494223dd23e21a2a0f8b0d3039ef42a3a282", "branch" : [ { "SHA1" : "e3e0494223dd23e21a2a0f8b0d3039ef42a3a282", "name" : "origin/feat_escape" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 670, "buildResult" : None, "marked" : { "SHA1" : "920f1d8e17bf77621efdba6c664cb26a7d2a67b4", "branch" : [ { "SHA1" : "920f1d8e17bf77621efdba6c664cb26a7d2a67b4", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "920f1d8e17bf77621efdba6c664cb26a7d2a67b4", "branch" : [ { "SHA1" : "920f1d8e17bf77621efdba6c664cb26a7d2a67b4", "name" : "origin/dev" } ] } }, "origin/escape_test" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 801, "buildResult" : None, "marked" : { "SHA1" : "bcfe8a183f44c4e17a55e839614ebfaa56e1c861", "branch" : [ { "SHA1" : "bcfe8a183f44c4e17a55e839614ebfaa56e1c861", "name" : "origin/escape_test" } ] }, "revision" : { "SHA1" : "bcfe8a183f44c4e17a55e839614ebfaa56e1c861", "branch" : [ { "SHA1" : "bcfe8a183f44c4e17a55e839614ebfaa56e1c861", "name" : "origin/escape_test" } ] } } }, "lastBuiltRevision" : { "SHA1" : "b7be5f6192372fcd3edfd44302b0204c1c9d7a59", "branch" : [ { "SHA1" : "b7be5f6192372fcd3edfd44302b0204c1c9d7a59", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/rminterpreter.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rcdev_sim" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 814, "buildResult" : None, "marked" : { "SHA1" : "788f6e2b59e21d67c7b8c00839a1b01d151f76a5", "branch" : [ { "SHA1" : "788f6e2b59e21d67c7b8c00839a1b01d151f76a5", "name" : "origin/rcdev_sim" } ] }, "revision" : { "SHA1" : "788f6e2b59e21d67c7b8c00839a1b01d151f76a5", "branch" : [ { "SHA1" : "788f6e2b59e21d67c7b8c00839a1b01d151f76a5", "name" : "origin/rcdev_sim" } ] } }, "origin/parallel_step" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 411, "buildResult" : None, "marked" : { "SHA1" : "d3e2c827f75dcc08282db8eebdb6889534b84a27", "branch" : [ { "SHA1" : "d3e2c827f75dcc08282db8eebdb6889534b84a27", "name" : "origin/parallel_step" } ] }, "revision" : { "SHA1" : "d3e2c827f75dcc08282db8eebdb6889534b84a27", "branch" : [ { "SHA1" : "d3e2c827f75dcc08282db8eebdb6889534b84a27", "name" : "origin/parallel_step" } ] } }, "origin/feat_cargo_width_1" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 803, "buildResult" : None, "marked" : { "SHA1" : "1e015cff9dddc734826837e074c145638e007784", "branch" : [ { "SHA1" : "1e015cff9dddc734826837e074c145638e007784", "name" : "origin/feat_cargo_width_1" } ] }, "revision" : { "SHA1" : "1e015cff9dddc734826837e074c145638e007784", "branch" : [ { "SHA1" : "1e015cff9dddc734826837e074c145638e007784", "name" : "origin/feat_cargo_width_1" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 807, "buildResult" : None, "marked" : { "SHA1" : "ee99b502622d11df1aef96d6e29399d818e5e950", "branch" : [ { "SHA1" : "ee99b502622d11df1aef96d6e29399d818e5e950", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "ee99b502622d11df1aef96d6e29399d818e5e950", "branch" : [ { "SHA1" : "ee99b502622d11df1aef96d6e29399d818e5e950", "name" : "origin/rc_dev" } ] } }, "origin/feat_parallel" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 722, "buildResult" : None, "marked" : { "SHA1" : "c21e5539ea3d02ffb5fcc4edd67dfac57c07744f", "branch" : [ { "SHA1" : "c21e5539ea3d02ffb5fcc4edd67dfac57c07744f", "name" : "origin/feat_parallel" } ] }, "revision" : { "SHA1" : "c21e5539ea3d02ffb5fcc4edd67dfac57c07744f", "branch" : [ { "SHA1" : "c21e5539ea3d02ffb5fcc4edd67dfac57c07744f", "name" : "origin/feat_parallel" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 745, "buildResult" : None, "marked" : { "SHA1" : "667e77a32b84c6acf1894d707aca5614f9501f91", "branch" : [ { "SHA1" : "667e77a32b84c6acf1894d707aca5614f9501f91", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "667e77a32b84c6acf1894d707aca5614f9501f91", "branch" : [ { "SHA1" : "667e77a32b84c6acf1894d707aca5614f9501f91", "name" : "origin/dev" } ] } }, "origin/feat_cargo_width" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 754, "buildResult" : None, "marked" : { "SHA1" : "d60b3ccfe7297adc7411bf5e08901cedc463fa3c", "branch" : [ { "SHA1" : "d60b3ccfe7297adc7411bf5e08901cedc463fa3c", "name" : "origin/feat_cargo_width" } ] }, "revision" : { "SHA1" : "d60b3ccfe7297adc7411bf5e08901cedc463fa3c", "branch" : [ { "SHA1" : "d60b3ccfe7297adc7411bf5e08901cedc463fa3c", "name" : "origin/feat_cargo_width" } ] } }, "origin/feat_cargo_width_remote" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 818, "buildResult" : None, "marked" : { "SHA1" : "9819d4408bc0a5a0d4f99866a9b42e3a98240e5b", "branch" : [ { "SHA1" : "9819d4408bc0a5a0d4f99866a9b42e3a98240e5b", "name" : "origin/feat_cargo_width_remote" } ] }, "revision" : { "SHA1" : "9819d4408bc0a5a0d4f99866a9b42e3a98240e5b", "branch" : [ { "SHA1" : "9819d4408bc0a5a0d4f99866a9b42e3a98240e5b", "name" : "origin/feat_cargo_width_remote" } ] } }, "origin/feat_cargo_width_sim" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "ec9e2338021681d1acbd1b8ce68de7225a19a4d6", "branch" : [ { "SHA1" : "ec9e2338021681d1acbd1b8ce68de7225a19a4d6", "name" : "origin/feat_cargo_width_sim" } ] }, "revision" : { "SHA1" : "ec9e2338021681d1acbd1b8ce68de7225a19a4d6", "branch" : [ { "SHA1" : "ec9e2338021681d1acbd1b8ce68de7225a19a4d6", "name" : "origin/feat_cargo_width_sim" } ] } } }, "lastBuiltRevision" : { "SHA1" : "ec9e2338021681d1acbd1b8ce68de7225a19a4d6", "branch" : [ { "SHA1" : "ec9e2338021681d1acbd1b8ce68de7225a19a4d6", "name" : "origin/feat_cargo_width_sim" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/control.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/feat_new_dynamic_bridge" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 551, "buildResult" : None, "marked" : { "SHA1" : "f52c7b87887d35d680523d76fcc34d09daa56d14", "branch" : [ { "SHA1" : "f52c7b87887d35d680523d76fcc34d09daa56d14", "name" : "origin/feat_new_dynamic_bridge" } ] }, "revision" : { "SHA1" : "f52c7b87887d35d680523d76fcc34d09daa56d14", "branch" : [ { "SHA1" : "f52c7b87887d35d680523d76fcc34d09daa56d14", "name" : "origin/feat_new_dynamic_bridge" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 843, "buildResult" : None, "marked" : { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "branch" : [ { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "branch" : [ { "SHA1" : "ea1c89844434379acfbe6bdb3c1da1e6d6275ec8", "name" : "origin/rc_dev" } ] } }, "origin/feat_multiple_process" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "a37647e3b7730733ecf57b599c159739a0237a40", "branch" : [ { "SHA1" : "a37647e3b7730733ecf57b599c159739a0237a40", "name" : "origin/feat_multiple_process" } ] }, "revision" : { "SHA1" : "a37647e3b7730733ecf57b599c159739a0237a40", "branch" : [ { "SHA1" : "a37647e3b7730733ecf57b599c159739a0237a40", "name" : "origin/feat_multiple_process" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 800, "buildResult" : None, "marked" : { "SHA1" : "31dd96e99d7d8b4123b416581d6029519c362c30", "branch" : [ { "SHA1" : "31dd96e99d7d8b4123b416581d6029519c362c30", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "31dd96e99d7d8b4123b416581d6029519c362c30", "branch" : [ { "SHA1" : "31dd96e99d7d8b4123b416581d6029519c362c30", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "a37647e3b7730733ecf57b599c159739a0237a40", "branch" : [ { "SHA1" : "a37647e3b7730733ecf57b599c159739a0237a40", "name" : "origin/feat_multiple_process" } ] }, "remoteUrls" : [ "http://159.27.226.4/map/hdmap_cloud.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "branch" : [ { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "branch" : [ { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "branch" : [ { "SHA1" : "ec58104e7665a2b3e74face26e9d18f19aee139e", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/thirdparty.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "branch" : [ { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "branch" : [ { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "branch" : [ { "SHA1" : "14b3ab42d11cd4c46f9cbcf75ec0e10727ded113", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/ros-bridge.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/haitian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 848, "buildResult" : None, "marked" : { "SHA1" : "4e6de9efd93722604f21be8fb46e47b97ca0b086", "branch" : [ { "SHA1" : "4e6de9efd93722604f21be8fb46e47b97ca0b086", "name" : "origin/haitian" } ] }, "revision" : { "SHA1" : "4e6de9efd93722604f21be8fb46e47b97ca0b086", "branch" : [ { "SHA1" : "4e6de9efd93722604f21be8fb46e47b97ca0b086", "name" : "origin/haitian" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "342fcdab3a4e1c1ae6bbe5480dc31c9ee0d9a099", "branch" : [ { "SHA1" : "342fcdab3a4e1c1ae6bbe5480dc31c9ee0d9a099", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "342fcdab3a4e1c1ae6bbe5480dc31c9ee0d9a099", "branch" : [ { "SHA1" : "342fcdab3a4e1c1ae6bbe5480dc31c9ee0d9a099", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "342fcdab3a4e1c1ae6bbe5480dc31c9ee0d9a099", "branch" : [ { "SHA1" : "342fcdab3a4e1c1ae6bbe5480dc31c9ee0d9a099", "name" : "origin/dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/multi_simulator.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/new_interface" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 565, "buildResult" : None, "marked" : { "SHA1" : "91aae2ebf01a13679b0567a511cb58ac13402f71", "branch" : [ { "SHA1" : "91aae2ebf01a13679b0567a511cb58ac13402f71", "name" : "origin/new_interface" } ] }, "revision" : { "SHA1" : "91aae2ebf01a13679b0567a511cb58ac13402f71", "branch" : [ { "SHA1" : "91aae2ebf01a13679b0567a511cb58ac13402f71", "name" : "origin/new_interface" } ] } }, "origin/Test_GetJunctions" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 523, "buildResult" : None, "marked" : { "SHA1" : "5d726a46c8fdd552e6c72c67916690ea90492a4c", "branch" : [ { "SHA1" : "5d726a46c8fdd552e6c72c67916690ea90492a4c", "name" : "origin/Test_GetJunctions" } ] }, "revision" : { "SHA1" : "5d726a46c8fdd552e6c72c67916690ea90492a4c", "branch" : [ { "SHA1" : "5d726a46c8fdd552e6c72c67916690ea90492a4c", "name" : "origin/Test_GetJunctions" } ] } }, "origin/feat_interface" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 547, "buildResult" : None, "marked" : { "SHA1" : "dabb18e27edf8e16dce2ff51bdd387f2438f6247", "branch" : [ { "SHA1" : "dabb18e27edf8e16dce2ff51bdd387f2438f6247", "name" : "origin/feat_interface" } ] }, "revision" : { "SHA1" : "dabb18e27edf8e16dce2ff51bdd387f2438f6247", "branch" : [ { "SHA1" : "dabb18e27edf8e16dce2ff51bdd387f2438f6247", "name" : "origin/feat_interface" } ] } }, "origin/temp_interface" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 572, "buildResult" : None, "marked" : { "SHA1" : "cd454059f302c9b2474e6609c1546a358ce6f72f", "branch" : [ { "SHA1" : "cd454059f302c9b2474e6609c1546a358ce6f72f", "name" : "origin/temp_interface" } ] }, "revision" : { "SHA1" : "cd454059f302c9b2474e6609c1546a358ce6f72f", "branch" : [ { "SHA1" : "cd454059f302c9b2474e6609c1546a358ce6f72f", "name" : "origin/temp_interface" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 849, "buildResult" : None, "marked" : { "SHA1" : "e1a9ccc3daaab7b840db7e90dde9010a6547aa20", "branch" : [ { "SHA1" : "e1a9ccc3daaab7b840db7e90dde9010a6547aa20", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "e1a9ccc3daaab7b840db7e90dde9010a6547aa20", "branch" : [ { "SHA1" : "e1a9ccc3daaab7b840db7e90dde9010a6547aa20", "name" : "origin/rc_dev" } ] } }, "origin/rc_dev_add_lane_name" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 846, "buildResult" : None, "marked" : { "SHA1" : "92e309ac89bf47d56624f14970eb911f54f1049b", "branch" : [ { "SHA1" : "92e309ac89bf47d56624f14970eb911f54f1049b", "name" : "origin/rc_dev_add_lane_name" } ] }, "revision" : { "SHA1" : "92e309ac89bf47d56624f14970eb911f54f1049b", "branch" : [ { "SHA1" : "92e309ac89bf47d56624f14970eb911f54f1049b", "name" : "origin/rc_dev_add_lane_name" } ] } }, "origin/feat_fence" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 649, "buildResult" : None, "marked" : { "SHA1" : "bfea094fbf5d6f1c5eca3dfaa2044894fec263f6", "branch" : [ { "SHA1" : "bfea094fbf5d6f1c5eca3dfaa2044894fec263f6", "name" : "origin/feat_fence" } ] }, "revision" : { "SHA1" : "bfea094fbf5d6f1c5eca3dfaa2044894fec263f6", "branch" : [ { "SHA1" : "bfea094fbf5d6f1c5eca3dfaa2044894fec263f6", "name" : "origin/feat_fence" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 651, "buildResult" : None, "marked" : { "SHA1" : "5c601c4e26b80b9924d9e2b39b999f7f1cd7cc8e", "branch" : [ { "SHA1" : "5c601c4e26b80b9924d9e2b39b999f7f1cd7cc8e", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "5c601c4e26b80b9924d9e2b39b999f7f1cd7cc8e", "branch" : [ { "SHA1" : "5c601c4e26b80b9924d9e2b39b999f7f1cd7cc8e", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "e1a9ccc3daaab7b840db7e90dde9010a6547aa20", "branch" : [ { "SHA1" : "e1a9ccc3daaab7b840db7e90dde9010a6547aa20", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/map/hdmap_interface.git" ], "scmName" : "" }, { }, { }, { }, { }, { }, { "_class" : "org.jenkinsci.plugins.displayurlapi.actions.RunDisplayAction" }, { "_class" : "org.jenkinsci.plugins.pipeline.modeldefinition.actions.RestartDeclarativePipelineAction" }, { }, { "_class" : "org.jenkinsci.plugins.workflow.job.views.FlowGraphAction" }, { }, { }, { } ], "artifacts" : [ ], "building" : False, "description" : None, "displayName" : "#849", "duration" : 2237381, "estimatedDuration" : 1971950, "executor" : None, "fullDisplayName" : "module-confname #849", "id" : "849", "keepLog" : False, "number" : 849, "queueId" : 982032, "result" : "FAILURE", "timestamp" : 1765263665037, "url" : "http://159.27.114.184:8080/jenkins/user/chenran/my-views/view/all/job/module-confname/849/", "changeSets" : [ { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/org/devops/vehicleInfo.groovy" ], "commitId" : "c75da24f70954917778d96da6a31cded76d4f4dd", "timestamp" : 1765260550000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update vehicleInfo.groovy\u000a", "date" : "2025-12-09 06:09:10 +0000", "id" : "c75da24f70954917778d96da6a31cded76d4f4dd", "msg" : "Update vehicleInfo.groovy", "paths" : [ { "editType" : "edit", "file" : "src/org/devops/vehicleInfo.groovy" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/org/devops/vehicleInfo.groovy" ], "commitId" : "54de87c6466d7890b8e59dda92587d8e0df291bf", "timestamp" : 1765260707000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update vehicleInfo.groovy\u000a", "date" : "2025-12-09 06:11:47 +0000", "id" : "54de87c6466d7890b8e59dda92587d8e0df291bf", "msg" : "Update vehicleInfo.groovy", "paths" : [ { "editType" : "edit", "file" : "src/org/devops/vehicleInfo.groovy" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/org/devops/vehicleInfo.groovy" ], "commitId" : "83afcf111d790d05dcd6e1295f10a1ad26666d91", "timestamp" : 1765260817000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update vehicleInfo.groovy\u000a", "date" : "2025-12-09 06:13:37 +0000", "id" : "83afcf111d790d05dcd6e1295f10a1ad26666d91", "msg" : "Update vehicleInfo.groovy", "paths" : [ { "editType" : "edit", "file" : "src/org/devops/vehicleInfo.groovy" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "params/yiwu-suxi-submodule.jenkinsfile" ], "commitId" : "ced66671d538eae6218ed99f1244bbe4f76befa9", "timestamp" : 1765260507000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update yiwu-suxi-submodule.jenkinsfile\u000a", "date" : "2025-12-09 06:08:27 +0000", "id" : "ced66671d538eae6218ed99f1244bbe4f76befa9", "msg" : "Update yiwu-suxi-submodule.jenkinsfile", "paths" : [ { "editType" : "edit", "file" : "params/yiwu-suxi-submodule.jenkinsfile" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "params/daxie-submodule.jenkinsfile" ], "commitId" : "bcbc399e19f9c0480180eb0cd8c2a1ea017d6c33", "timestamp" : 1765260925000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, "authorEmail" : "weilikang@senior.auto", "comment" : "Update daxie-submodule.jenkinsfile\u000a", "date" : "2025-12-09 06:15:25 +0000", "id" : "bcbc399e19f9c0480180eb0cd8c2a1ea017d6c33", "msg" : "Update daxie-submodule.jenkinsfile", "paths" : [ { "editType" : "edit", "file" : "params/daxie-submodule.jenkinsfile" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/legacy_searchers/hybrid_a_star_tt.h", "ssep/scenarios/truck_bulk_yark_in_out_planner.h", "ssep/coarse_search/geometric_searcher/evaluator/ref_line_cost_computer.h", "ssep/data_structures/directional_path.cc", "ssep/coarse_search/geometric_searcher/evaluator/ref_line_heuristic_computer.h", "ssep/coarse_search/motion_primitive_sampler/arc_path_motion_primitive_sampler.h", "ssep/keb_optimizer/keb_problem.cc", "ssep/coarse_search/geometric_searcher/candidate_yard_entry_states_generator.cc", "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.cc", "ssep/coarse_search/node_imv.cc", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/diagnal_motion_primitive_sampler.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.cc", "ssep/coarse_search/geometric_searcher/evaluator/kinematic_heuristic_computer.h", "ssep/coarse_search/legacy_searchers/reeds_shepp_path.cc", "ssep/coarse_search/legacy_searchers/hybrid_a_star_car.cc", "ssep/coarse_search/topology_analysis/voronoi_graph_builder.h", "ssep/coarse_search/geometric_search_visualizer.h", "ssep/coarse_search/conditions/crosses_access_line_condition.h", "ssep/coarse_search/evaluator/trailer_collision_cost_computer.h", "ssep/coarse_search/motion_primitive_sampler/dubins_path.cc", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc", "ssep/coarse_search/motion_primitive_sampler/const_curvature_motion_primitive_sampler.cc", "ssep/coarse_search/geometric_searcher/data_structure.h", "ssep/coarse_search/reeds_shepp_path.cc", "ssep/data_structures/map_element_polyline.hpp", "ssep/coarse_search/geometric_searcher/topology_analysis/candidate_goals_generator.cc", "ssep/coarse_search/topology_analysis/voronoi_thinner.h", "ssep/coarse_search/geometric_searcher/conditions/crosses_access_line_condition.h", "ssep/coarse_search/geometric_searcher/searcher_builders/u_turn_insertion_maneuver_searcher_builder.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dubins_path_motion_primitive_sampler.h", "ssep/data_structures/polyline.cc", "ssep/coarse_search/evaluator/ref_line_cost_computer.h", "ssep/common/def/ssep_input.hpp", "ssep/tools/scene_data_generator/generate_scene_data_cli.cc", "ssep/coarse_search/hybrid_a_star_tt.h", "ssep/coarse_search/node_tt.cc", "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.h", "ssep/coarse_search/stage_transition_controller.h", "ssep/coarse_search/topology_analysis/voronoi_graph_visualizer.h", "ssep/coarse_search/hybrid_a_star_imv.cc", "ssep/coarse_search/search_engine_interface.h", "ssep/data_structures/pose_utils.h", "ssep/coarse_search/geometric_searcher/multi_stage_hybrid_astar_search_engine.cc", "ssep/sdk/ssep_activation_impl.h", "ssep/coarse_search/state_hasher.h", "ssep/coarse_search/geometric_searcher/conditions/range_tolerance_condition.h", "ssep/coarse_search/motion_primitive_sampler/dubins_path_motion_primitive_sampler.h", "ssep/influence_map/dubin_layer.h", "ssep/tools/tractor_trailer_shortest_path_heuristic_generator/generate_shortest_path_heur_cli.cc", "ssep/coarse_search/geometric_searcher/bidirectional_hybrid_astar_search_engine.cc", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/const_curvature_motion_primitive_sampler.h", "ssep/coarse_search/geometric_searcher/state_hasher.h", "ssep/coarse_search/geometric_searcher/bulk_yard_geometric_searcher.cc", "ssep/tools/scene_data_generator/trajectory_provider/search_based_trajectory_provider.h", "ssep/coarse_search/evaluator/conditional_filter_cost_computer.h", "ssep/coarse_search/hybrid_a_star_car.h", "ssep/coarse_search/topology_analysis/voronoi_graph_visualizer.cc", "ssep/coarse_search/evaluator/path_length_cost_computer.h", "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_thinner.cc", "ssep/coarse_search/legacy_searchers/node_car.cc", "ssep/coarse_search/geometric_searcher/evaluator/heuristic_feature_computer.h", "ssep/coarse_search/evaluator/trailer_shortest_path_heur_computer.h", "ssep/coarse_search/geometric_searcher/topology_analysis/barrier_detector.h", "ssep/coarse_search/geometric_searcher/geometric_search_visualizer.cc", "ssep/coarse_search/legacy_searchers/reeds_shepp_path.h", "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_graph_builder.h", "ssep/coarse_search/geometric_searcher/searcher_builders/back_insertion_maneuver_searcher_builder.cc", "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/reeds_shepp_path.cc", "ssep/common/status_macros.h", "ssep/coarse_search/reeds_shepp_path.h", "ssep/main_test/main_test_diagonal.cc", "ssep/coarse_search/conditions/search_condition_interface.h", "ssep/coarse_search/legacy_searchers/hybrid_a_star_imv.cc", "ssep/scenarios/truck_fuzzy_reversing_planner.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/arc_path_motion_primitive_sampler.h", "ssep/coarse_search/motion_primitive_sampler/ilqr_motion_primitive_sampler.cc", "ssep/keb_optimizer/imv_keb_optimizer.cc", "ssep/tools/executable/main_obstacle_publisher.cc", "ssep/coarse_search/data_structure/pose_utils.cc", "ssep/data_structures/search_boundary.h", "ssep/coarse_search/geometric_searcher/conditions/tractor_trailer_goal_reached_condition.h", "ssep/coarse_search/geometric_searcher/evaluator/composite_heuristic_computer.h", "ssep/coarse_search/geometric_searcher/bidirectional_hybrid_astar_search_engine.h", "ssep/coarse_search/multi_stage_hybrid_astar_search_engine.cc", "ssep/ssep_visualizer.h", "ssep/coarse_search/motion_primitive_sampler/dubins_path_motion_primitive_sampler.cc", "ssep/data_structures/ssep_input.hpp", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/composed_motion_primitive_sampler.h", "ssep/tools/scene_data_generator/state_augment_util.h", "ssep/coarse_search/conditions/trailer_relative_angle_condition.h", "ssep/coarse_search/motion_primitive_sampler/reeds_shepp_path.h", "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.h", "ssep/main_test/main_test_dg.cc", "ssep/coarse_search/geometric_searcher/utils.h", "ssep/coarse_search/geometric_searcher/stage_transition_controller.h", "ssep/coarse_search/conditions/tractor_trailer_goal_reached_condition.h", "ssep/coarse_search/legacy_searchers/node_car.h", "ssep/coarse_search/geometric_searcher/evaluator/dir_switching_cost_computer.h", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/coarse_search/geometric_searcher/conditions/always_true_condition.h", "ssep/main_test/main_ssep.cc", "ssep/data_structures/ssep_output.hpp", "ssep/coarse_search/evaluator/diagonal_cost_computer.h", "ssep/main_test/main_test_park.cc", "ssep/coarse_search/geometric_search_visualizer.cc", "ssep/main_test/main_test_tt.cc", "ssep/coarse_search/evaluator/bidirectional_kinematic_heuristic_computer.h", "ssep/coarse_search/geometric_searcher/geometric_search_visualizer.h", "ssep/common/def/ssep_recursion_og.hpp", "ssep/coarse_search/conditions/composite_condition.h", "ssep/coarse_search/geometric_searcher/searcher_builders/rigid_truck_general_searcher_builder.cc", "ssep/common/utils/map_element_utils.hpp", "ssep/coarse_search/legacy_searchers/hybrid_a_star_car.h", "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_graph_visualizer.cc", "ssep/tools/executable/third_party/json.hpp", "ssep/coarse_search/geometric_searcher/evaluator/cost_feature_computer.h", "ssep/coarse_search/topology_analysis/barrier_result.h", "ssep/common/utils/common.hpp", "ssep/coarse_search/geometric_searcher/candidate_yard_entry_states_generator.h", "ssep/data_structures/type_definition.h", "ssep/coarse_search/hybrid_a_star_imv.h", "ssep/coarse_search/geometric_searcher/multi_stage_hybrid_astar_search_engine.h", "ssep/coarse_search/topology_analysis/candidate_goals_generator.h", "ssep/coarse_search/node_car.cc", "ssep/data_structures/ssep_scenario_type.hpp", "ssep/main_test/main_test_qhd.cc", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/reeds_shepp_path.h", "ssep/coarse_search/preprocessed_curves/tt_curve.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/motion_primitive_sampler.h", "ssep/main_test/main_test_car.cc", "ssep/coarse_search/legacy_searcher_adaptor.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/reverse_primitive_decorator.h", "ssep/coarse_search/motion_primitive_sampler/reeds_shepp_path.cc", "ssep/coarse_search/motion_primitive_sampler/diagnal_motion_primitive_sampler.cc", "ssep/coarse_search/candidate_yard_entry_states_generator.cc", "ssep/coarse_search/search_graph.h", "ssep/coarse_search/hybrid_a_star_car.cc", "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_graph_builder.cc", "ssep/coarse_search/geometric_searcher/searcher_builders/bulk_yard_in_out_path_searcher_builder.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/multi_curvature_motion_primitive_sampler.h", "ssep/scenarios/truck_u_turn_planner.h", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h", "ssep/coarse_search/conditions/back_insertion_alignment_condition.h", "ssep/coarse_search/motion_primitive_sampler/arc_path_motion_primitive_sampler.cc", "ssep/coarse_search/dubin_path.h", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc", "ssep/common/def/type_definition.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dir_change_path_extention_decorator.h", "ssep/coarse_search/geometric_searcher/conditions/path_direction_condition.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/const_curvature_motion_primitive_sampler.cc", "ssep/data_structures/pose_utils.cc", "ssep/data_structures/ssep_recursion_obstacle.hpp", "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_thinner.h", "ssep/main_test/main_ssep_input.cc", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/straight_line_motion_primitive_sampler.cc", "ssep/coarse_search/geometric_searcher/conditions/inside_yard_condition.h", "ssep/coarse_search/data_structure/pose_utils.h", "ssep/coarse_search/motion_primitive_sampler/straight_line_motion_primitive_sampler.cc", "ssep/coarse_search/geometric_searcher/indexed_priority_queue.h", "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/main_test/main_ssep_test.cc", "ssep/coarse_search/geometric_searcher/evaluator/collision_cost_computer.h", "ssep/coarse_search/geometric_searcher/evaluator/path_length_cost_computer.h", "ssep/coarse_search/geometric_searcher/evaluator/trailer_collision_cost_computer.h", "ssep/coarse_search/geometric_searcher/evaluator/jackknife_cost_computer.h", "ssep/coarse_search/motion_primitive_sampler/trailer_heading_motion_primitive_decorator.h", "ssep/coarse_search/node_car.h", "ssep/coarse_search/hybrid_a_star_tt.cc", "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.cc", "ssep/coarse_search/legacy_searchers/node_tt.h", "ssep/coarse_search/conditions/path_direction_condition.h", "ssep/coarse_search/geometric_searcher/motion_primitive.h", "ssep/coarse_search/data_structure/pose.h", "ssep/common/def/type_definition.cc", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/straight_line_motion_primitive_sampler.h", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc", "ssep/coarse_search/geometric_searcher/conditions/search_condition_interface.h", "ssep/coarse_search/data_structure/directional_path.h", "ssep/coarse_search/geometric_searcher/evaluator/trailer_shortest_path_heur_computer.cc", "ssep/coarse_search/geometric_searcher/searcher_builders/back_insertion_maneuver_searcher_builder.h", "ssep/coarse_search/multi_stage_hybrid_astar_search_engine.h", "ssep/ogm_map/ogm.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/arc_path_motion_primitive_sampler.cc", "ssep/coarse_search/geometric_searcher/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc", "ssep/third_party/json.hpp", "ssep/smoother/safety_corridor_smoother.cc", "ssep/coarse_search/geometric_searcher/utils.cc", "ssep/coarse_search/geometric_searcher/conditions/composite_condition.h", "ssep/coarse_search/topology_analysis/barrier_detector.h", "ssep/keb_optimizer/imv_keb_optimizer.h", "ssep/coarse_search/motion_primitive_sampler/multi_curvature_motion_primitive_sampler.h", "ssep/coarse_search/geometric_searcher/evaluator/trailer_shortest_path_heur_computer.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/ilqr_motion_primitive_sampler.h", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc", "ssep/coarse_search/geometric_searcher/searcher_builders/imv_general_searcher_builder.h", "ssep/common/def/ssep_recursion_obstacle.hpp", "ssep/keb_optimizer/keb_problem.h", "ssep/common/def/ssep_output.hpp", "ssep/coarse_search/grid_search.h", "ssep/coarse_search/hybrid_a_star.hpp", "ssep/coarse_search/utils.cc", "ssep/coarse_search/evaluator/trailer_shortest_path_heur_computer.cc", "ssep/keb_optimizer/rigid_truck_keb_optimizer.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/diagnal_motion_primitive_sampler.h", "ssep/coarse_search/evaluator/curvature_cost_computer.h", "ssep/coarse_search/indexed_priority_queue.h", "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_general_searcher_builder.cc", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/rs_path_motion_primitive_sampler.h", "ssep/coarse_search/evaluator/kinematic_heuristic_computer.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dubins_path.h", "ssep/coarse_search/geometric_searcher/evaluator/diagonal_cost_computer.h", "ssep/coarse_search/evaluator/heuristic_feature_computer.h", "ssep/coarse_search/legacy_searchers/node_tt.cc", "ssep/common/def/ssep_scenario_type.hpp", "ssep/coarse_search/motion_primitive_sampler/straight_line_motion_primitive_sampler.h", "ssep/coarse_search/legacy_searchers/grid_search.h", "ssep/coarse_search/evaluator/ref_line_heuristic_computer.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/rs_path_motion_primitive_sampler.cc", "ssep/coarse_search/topology_analysis/voronoi_graph_builder.cc", "ssep/keb_optimizer/keb_utils.h", "ssep/coarse_search/geometric_searcher/legacy_searcher_adaptor.h", "ssep/coarse_search/geometric_searcher/evaluator/curvature_cost_computer.h", "ssep/tools/scene_data_generator/ogm_builder/ogm_builder.h", "ssep/coarse_search/node_tt.h", "ssep/coarse_search/grid_search.cc", "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h", "ssep/coarse_search/motion_primitive_sampler/motion_primitive_sampler.h", "ssep/coarse_search/geometric_searcher/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h", "ssep/coarse_search/evaluator/evaluator.h", "ssep/data_structures/polyline.h", "ssep/coarse_search/geometric_searcher/searcher_builders/imv_general_searcher_builder.cc", "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h", "ssep/tools/scene_data_generator/utils.h", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "ssep/coarse_search/geometric_searcher/conditions/along_lane_condition.h", "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.h", "ssep/tools/tractor_trailer_shortest_path_heuristic_generator/shortest_path_expander.cc", "ssep/coarse_search/legacy_searchers/node_imv.h", "ssep/coarse_search/geometric_searcher/searcher_builders/truck_reference_following_searcher_builder.h", "ssep/coarse_search/legacy_searchers/node_imv.cc", "ssep/coarse_search/geometric_searcher/searcher_builders/rigid_truck_general_searcher_builder.h", "ssep/coarse_search/motion_primitive_sampler/const_curvature_motion_primitive_sampler.h", "ssep/coarse_search/topology_analysis/candidate_goals_generator.cc", "ssep/coarse_search/geometric_searcher/topology_analysis/barrier_detector.cc", "ssep/coarse_search/geometric_searcher/searcher_builders/truck_reference_following_searcher_builder.cc", "ssep/coarse_search/topology_analysis/voronoi_thinner.cc", "ssep/coarse_search/motion_primitive_sampler/multi_curvature_motion_primitive_sampler.cc", "ssep/coarse_search/reference_line_snapper.h", "ssep/common/utils/plotter.hpp", "ssep/data_structures/path.h", "ssep/tools/tractor_trailer_shortest_path_heuristic_generator/shortest_path_heur_table.h", "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.h", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h", "ssep/coarse_search/motion_primitive_sampler/ilqr_motion_primitive_sampler.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dubins_path.cc", "ssep/coarse_search/data_structure/directional_path.cc", "ssep/conf/ssep_preprocess.yaml", "ssep/scenarios/scenario_planner_interface.h", "ssep/coarse_search/evaluator/collision_cost_computer.h", "ssep/coarse_search/topology_analysis/barrier_detector.cc", "ssep/coarse_search/legacy_searchers/hybrid_a_star_imv.h", "ssep/coarse_search/legacy_searchers/dubin_path.h", "ssep/common/def/map_element_polyline.hpp", "ssep/coarse_search/geometric_searcher/bulk_yard_geometric_searcher.h", "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.cc", "ssep/coarse_search/geometric_searcher/searcher_builders/u_turn_insertion_maneuver_searcher_builder.cc", "ssep/coarse_search/geometric_searcher/evaluator/bidirectional_kinematic_heuristic_computer.h", "ssep/coarse_search/geometric_searcher/topology_analysis/bulk_yard_reasoner.h", "ssep/ssep_planner.h", "ssep/CMakeLists.txt", "ssep/coarse_search/evaluator/composite_heuristic_computer.h", "ssep/data_structures/ssep_recursion_og.hpp", "ssep/coarse_search/motion_primitive_sampler/rs_path_motion_primitive_sampler.h", "ssep/coarse_search/legacy_searchers/dubin_path.cc", "ssep/coarse_search/data_structure/polyline.cc", "ssep/ssep_planner.cc", "ssep/influence_map/obstacle_layer.h", "ssep/coarse_search/data_structure/polyline.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/ilqr_motion_primitive_sampler.cc", "ssep/coarse_search/evaluator/jackknife_cost_computer.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/trailer_heading_motion_primitive_decorator.h", "ssep/coarse_search/dubin_path.cc", "ssep/coarse_search/candidate_yard_entry_states_generator.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dubins_path_motion_primitive_sampler.cc", "ssep/coarse_search/preprocessed_curves/tt_curve_manager.cc", "ssep/coarse_search/geometric_searcher/topology_analysis/candidate_goals_generator.h", "ssep/coarse_search/motion_primitive_sampler/reverse_primitive_decorator.h", "ssep/coarse_search/motion_primitive.h", "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_general_searcher_builder.h", "ssep/coarse_search/conditions/always_true_condition.h", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.h", "ssep/coarse_search/node_imv.h", "ssep/coarse_search/geometric_searcher/evaluator/evaluator.h", "ssep/coarse_search/geometric_searcher/conditions/trailer_relative_angle_condition.h", "ssep/coarse_search/motion_primitive_sampler/dir_change_path_extention_decorator.h", "ssep/coarse_search/geometric_searcher/search_graph.h", "ssep/coarse_search/geometric_searcher/evaluator/conditional_filter_cost_computer.h", "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc", "ssep/coarse_search/ml_path_validator.h", "ssep/coarse_search/legacy_searchers/grid_search.cc", "ssep/coarse_search/conditions/along_lane_condition.h", "ssep/main_test/hdmap_interface/rapidjson/internal/regex.h", "ssep/data_structures/pose.h", "ssep/coarse_search/geometric_searcher/conditions/back_insertion_alignment_condition.h", "ssep/coarse_search/geometric_searcher/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.cc", "ssep/coarse_search/motion_primitive_sampler/diagnal_motion_primitive_sampler.h", "ssep/tools/tractor_trailer_shortest_path_heuristic_generator/shortest_path_expander.h", "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.h", "ssep/coarse_search/conditions/range_tolerance_condition.h", "ssep/coarse_search/evaluator/cost_feature_computer.h", "ssep/coarse_search/evaluator/dir_switching_cost_computer.h", "ssep/coarse_search/motion_primitive_sampler/composed_motion_primitive_sampler.h", "ssep/main_test/main_test_zhoushan.cc", "ssep/scenarios/scenario_planner_factory.h", "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_graph_visualizer.h", "ssep/coarse_search/utils.h", "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.h", "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.h", "ssep/coarse_search/geometric_searcher/search_engine_interface.h", "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/multi_curvature_motion_primitive_sampler.cc", "ssep/coarse_search/motion_primitive_sampler/dubins_path.h", "ssep/data_structures/type_definition.cc", "ssep/coarse_search/conditions/inside_yard_condition.h", "ssep/data_structures/directional_path.h", "ssep/tools/executable/inference_ml_trajectory_cli.cc", "ssep/coarse_search/topology_analysis/bulk_yard_reasoner.h", "ssep/coarse_search/legacy_searchers/hybrid_a_star_tt.cc", "ssep/coarse_search/motion_primitive_sampler/rs_path_motion_primitive_sampler.cc" ], "commitId" : "9f2a67682331d01ff0fb9e1fb6b02fd5f347a019", "timestamp" : 1763618563000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: Refactor\u000a", "date" : "2025-11-20 14:02:43 +0800", "id" : "9f2a67682331d01ff0fb9e1fb6b02fd5f347a019", "msg" : "chore: SSEP: Refactor", "paths" : [ { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/always_true_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/diagnal_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/diagnal_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/grid_search.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/diagnal_motion_primitive_sampler.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/voronoi_thinner.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/multi_curvature_motion_primitive_sampler.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/indexed_priority_queue.h" }, { "editType" : "add", "file" : "ssep/scenarios/scenario_planner_interface.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/heuristic_feature_computer.h" }, { "editType" : "edit", "file" : "ssep/main_test/main_test_tt.cc" }, { "editType" : "edit", "file" : "ssep/tools/tractor_trailer_shortest_path_heuristic_generator/shortest_path_heur_table.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/geometric_searcher/bulk_yard_geometric_searcher.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dubins_path_motion_primitive_sampler.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/candidate_yard_entry_states_generator.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dir_change_path_extention_decorator.h" }, { "editType" : "edit", "file" : "ssep/influence_map/obstacle_layer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/barrier_detector.cc" }, { "editType" : "edit", "file" : "ssep/main_test/main_test_car.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/cost_feature_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/crosses_access_line_condition.h" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/back_insertion_alignment_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/curvature_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/trailer_relative_angle_condition.h" }, { "editType" : "edit", "file" : "ssep/common/utils/common.hpp" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/node_imv.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/reeds_shepp_path.h" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/search_condition_interface.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/node_car.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_graph_builder.cc" }, { "editType" : "edit", "file" : "ssep/tools/scene_data_generator/utils.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/ml_path_validator.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/state_hasher.h" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/along_lane_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/candidate_yard_entry_states_generator.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/hybrid_a_star_car.h" }, { "editType" : "edit", "file" : "ssep/tools/tractor_trailer_shortest_path_heuristic_generator/shortest_path_expander.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.h" }, { "editType" : "edit", "file" : "ssep/tools/tractor_trailer_shortest_path_heuristic_generator/generate_shortest_path_heur_cli.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/tractor_trailer_goal_reached_condition.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/arc_path_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/composed_motion_primitive_sampler.h" }, { "editType" : "edit", "file" : "ssep/main_test/main_test_zhoushan.cc" }, { "editType" : "add", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/node_tt.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/main_test/main_ssep.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/path_length_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/hybrid_a_star_tt.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/preprocessed_curves/tt_curve_manager.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/barrier_detector.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/node_tt.h" }, { "editType" : "edit", "file" : "ssep/tools/executable/main_obstacle_publisher.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_thinner.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/node_tt.cc" }, { "editType" : "add", "file" : "ssep/data_structures/polyline.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/dubin_path.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/back_insertion_alignment_condition.h" }, { "editType" : "edit", "file" : "ssep/common/utils/map_element_utils.hpp" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/arc_path_motion_primitive_sampler.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/range_tolerance_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/legacy_searcher_adaptor.h" }, { "editType" : "add", "file" : "ssep/data_structures/pose_utils.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/straight_line_motion_primitive_sampler.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/trailer_collision_cost_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/data_structure/polyline.cc" }, { "editType" : "add", "file" : "ssep/data_structures/polyline.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/multi_curvature_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/data_structures/ssep_output.hpp" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/evaluator.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/grid_search.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/const_curvature_motion_primitive_sampler.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/diagnal_motion_primitive_sampler.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/search_graph.h" }, { "editType" : "add", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" }, { "editType" : "add", "file" : "ssep/data_structures/map_element_polyline.hpp" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/voronoi_thinner.h" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/inside_yard_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/path_direction_condition.h" }, { "editType" : "delete", "file" : "ssep/common/def/ssep_recursion_og.hpp" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/trailer_relative_angle_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/heuristic_feature_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/evaluator.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/hybrid_a_star_imv.h" }, { "editType" : "edit", "file" : "ssep/main_test/main_test_dg.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/trailer_shortest_path_heur_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/multi_curvature_motion_primitive_sampler.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/trailer_collision_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/dubins_path.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/hybrid_a_star_tt.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive.h" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/voronoi_graph_builder.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/straight_line_motion_primitive_sampler.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/candidate_yard_entry_states_generator.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/node_car.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/multi_stage_hybrid_astar_search_engine.h" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/barrier_result.h" }, { "editType" : "delete", "file" : "ssep/common/def/map_element_polyline.hpp" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/const_curvature_motion_primitive_sampler.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/const_curvature_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/rs_path_motion_primitive_sampler.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/conditional_filter_cost_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/rs_path_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/voronoi_graph_visualizer.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/candidate_goals_generator.cc" }, { "editType" : "edit", "file" : "ssep/main_test/main_test_park.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/truck_reference_following_searcher_builder.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_thinner.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/data_structure/directional_path.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/bidirectional_hybrid_astar_search_engine.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/back_insertion_maneuver_searcher_builder.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/candidate_goals_generator.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/reeds_shepp_path.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/rigid_truck_general_searcher_builder.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/voronoi_graph_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/multi_stage_hybrid_astar_search_engine.h" }, { "editType" : "edit", "file" : "ssep/CMakeLists.txt" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/dubin_path.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/path_length_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/geometric_search_visualizer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/ilqr_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/ilqr_motion_primitive_sampler.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/ref_line_heuristic_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/data_structure/pose_utils.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_general_searcher_builder.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/diagonal_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/bulk_yard_reasoner.h" }, { "editType" : "add", "file" : "ssep/data_structures/type_definition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/bidirectional_kinematic_heuristic_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/search_graph.h" }, { "editType" : "add", "file" : "ssep/common/status_macros.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/search_condition_interface.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/candidate_goals_generator.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/hybrid_a_star_car.cc" }, { "editType" : "edit", "file" : "ssep/ssep_planner.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/trailer_shortest_path_heur_computer.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/straight_line_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/data_structures/search_boundary.h" }, { "editType" : "add", "file" : "ssep/data_structures/type_definition.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/reeds_shepp_path.cc" }, { "editType" : "edit", "file" : "ssep/tools/tractor_trailer_shortest_path_heuristic_generator/shortest_path_expander.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/hybrid_a_star_imv.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/tractor_trailer_goal_reached_condition.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/back_insertion_maneuver_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/node_imv.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/grid_search.h" }, { "editType" : "delete", "file" : "ssep/common/def/ssep_recursion_obstacle.hpp" }, { "editType" : "add", "file" : "ssep/coarse_search/geometric_search_visualizer.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/reeds_shepp_path.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/u_turn_insertion_maneuver_searcher_builder.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_graph_builder.h" }, { "editType" : "add", "file" : "ssep/data_structures/path.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/cost_feature_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/node_imv.cc" }, { "editType" : "delete", "file" : "ssep/common/def/ssep_scenario_type.hpp" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/imv_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" }, { "editType" : "delete", "file" : "ssep/common/def/ssep_input.hpp" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/stage_transition_controller.h" }, { "editType" : "delete", "file" : "ssep/common/def/type_definition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/truck_multi_segment_parking_bidirectional_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/candidate_goals_generator.h" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/always_true_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/range_tolerance_condition.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/jackknife_cost_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/utils.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/dubins_path_motion_primitive_sampler.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/reference_line_snapper.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/barrier_detector.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/data_structure/pose.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/trailer_shortest_path_heur_computer.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/hybrid_a_star_tt.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_graph_visualizer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/reverse_primitive_decorator.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/bulk_yard_in_out_path_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/dubins_path_motion_primitive_sampler.h" }, { "editType" : "delete", "file" : "ssep/common/def/type_definition.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/collision_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/dir_change_path_extention_decorator.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/ref_line_cost_computer.h" }, { "editType" : "edit", "file" : "ssep/sdk/ssep_activation_impl.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/bidirectional_hybrid_astar_search_engine.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/arc_path_motion_primitive_sampler.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/composed_motion_primitive_sampler.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/jackknife_cost_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/geometric_search_visualizer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/motion_primitive_sampler.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/hybrid_a_star_car.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/hybrid_a_star.hpp" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/barrier_detector.h" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/composite_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/multi_stage_hybrid_astar_search_engine.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/dubins_path.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/straight_line_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/ref_line_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/hybrid_a_star_tt.h" }, { "editType" : "add", "file" : "ssep/data_structures/directional_path.h" }, { "editType" : "edit", "file" : "ssep/tools/scene_data_generator/generate_scene_data_cli.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/hybrid_a_star_imv.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dubins_path.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dubins_path_motion_primitive_sampler.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/voronoi_graph_visualizer.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/crosses_access_line_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/node_car.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/geometric_search_visualizer.cc" }, { "editType" : "add", "file" : "ssep/data_structures/pose_utils.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/rs_path_motion_primitive_sampler.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/dubin_path.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/bidirectional_kinematic_heuristic_computer.h" }, { "editType" : "edit", "file" : "ssep/ogm_map/ogm.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/data_structure/pose_utils.cc" }, { "editType" : "add", "file" : "ssep/data_structures/ssep_recursion_og.hpp" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/tractor_trailer_general_searcher_builder.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/truck_reference_following_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/ssep_visualizer.h" }, { "editType" : "edit", "file" : "ssep/tools/scene_data_generator/ogm_builder/ogm_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/common/utils/plotter.hpp" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/arc_path_motion_primitive_sampler.cc" }, { "editType" : "edit", "file" : "ssep/main_test/main_ssep_test.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/kinematic_heuristic_computer.h" }, { "editType" : "edit", "file" : "ssep/main_test/main_test_qhd.cc" }, { "editType" : "add", "file" : "ssep/data_structures/directional_path.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/tools/executable/inference_ml_trajectory_cli.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/state_hasher.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/data_structure/polyline.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/dir_switching_cost_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/dir_switching_cost_computer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/data_structure/directional_path.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/geometric_searcher/bulk_yard_geometric_searcher.h" }, { "editType" : "add", "file" : "ssep/data_structures/ssep_input.hpp" }, { "editType" : "add", "file" : "ssep/coarse_search/topology_analysis/voronoi_graph_visualizer.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/stage_transition_controller.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/hybrid_a_star_imv.cc" }, { "editType" : "add", "file" : "ssep/data_structures/ssep_scenario_type.hpp" }, { "editType" : "add", "file" : "ssep/scenarios/truck_u_turn_planner.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/multi_curvature_motion_primitive_sampler.h" }, { "editType" : "edit", "file" : "ssep/conf/ssep_preprocess.yaml" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/composite_heuristic_computer.h" }, { "editType" : "edit", "file" : "ssep/third_party/json.hpp" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/hybrid_a_star_car.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/reeds_shepp_path.cc" }, { "editType" : "edit", "file" : "ssep/main_test/hdmap_interface/rapidjson/internal/regex.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/collision_cost_computer.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/preprocessed_curves/tt_curve.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/topology_analysis/bulk_yard_reasoner.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/trailer_heading_motion_primitive_decorator.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/node_tt.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/back_insertion_maneuver_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/tools/scene_data_generator/state_augment_util.h" }, { "editType" : "add", "file" : "ssep/coarse_search/utils.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_utils.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/ilqr_motion_primitive_sampler.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/ilqr_motion_primitive_sampler.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/rs_path_motion_primitive_sampler.cc" }, { "editType" : "delete", "file" : "ssep/common/def/ssep_output.hpp" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/trailer_shortest_path_heur_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/diagonal_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/const_curvature_motion_primitive_sampler.h" }, { "editType" : "edit", "file" : "ssep/influence_map/dubin_layer.h" }, { "editType" : "edit", "file" : "ssep/smoother/safety_corridor_smoother.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/reeds_shepp_path.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/tools/scene_data_generator/trajectory_provider/search_based_trajectory_provider.h" }, { "editType" : "add", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "add", "file" : "ssep/coarse_search/multi_stage_hybrid_astar_search_engine.cc" }, { "editType" : "add", "file" : "ssep/data_structures/pose.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/trailer_heading_motion_primitive_decorator.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/along_lane_condition.h" }, { "editType" : "add", "file" : "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/indexed_priority_queue.h" }, { "editType" : "add", "file" : "ssep/coarse_search/search_engine_interface.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/data_structure.h" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/reverse_primitive_decorator.h" }, { "editType" : "edit", "file" : "ssep/tools/executable/third_party/json.hpp" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/composite_condition.h" }, { "editType" : "add", "file" : "ssep/coarse_search/conditions/path_direction_condition.h" }, { "editType" : "add", "file" : "ssep/data_structures/ssep_recursion_obstacle.hpp" }, { "editType" : "edit", "file" : "ssep/main_test/main_test_diagonal.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/conditions/inside_yard_condition.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/node_imv.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/kinematic_heuristic_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/utils.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/grid_search.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/motion_primitive_sampler/dubins_path.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/motion_primitive_sampler.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/motion_primitive_sampler/reeds_shepp_path.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/node_car.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/composite_heuristic_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searchers/reeds_shepp_path.cc" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/conditional_filter_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/evaluator/curvature_cost_computer.h" }, { "editType" : "add", "file" : "ssep/coarse_search/legacy_searcher_adaptor.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/imv_general_searcher_builder.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/utils.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/u_turn_insertion_maneuver_searcher_builder.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/dubin_path.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/search_engine_interface.h" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/searcher_builders/rigid_truck_general_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/coarse_search/candidate_yard_entry_states_generator.h" }, { "editType" : "edit", "file" : "ssep/main_test/main_ssep_input.cc" }, { "editType" : "delete", "file" : "ssep/coarse_search/geometric_searcher/evaluator/ref_line_heuristic_computer.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc" ], "commitId" : "529b72271832443127b523f087fd36a48242929b", "timestamp" : 1763623418000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 改进脱困模式效果\u000a", "date" : "2025-11-20 15:23:38 +0800", "id" : "529b72271832443127b523f087fd36a48242929b", "msg" : "chore: SSEP: 改进脱困模式效果", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/evaluator/evaluator.h", "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h", "ssep/coarse_search/evaluator/ref_line_cost_computer.h", "ssep/influence_map/sl_projection_map.h", "ssep/influence_map/sl_projection_map.cc", "data/ssep/ssep_ec.cpp", "ssep/coarse_search/hybrid_a_star.hpp" ], "commitId" : "111c49d62fd8f628c810a01afac5671d9c76c540", "timestamp" : 1763623964000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: ssep改善脱困模式搜索效果\u000a", "date" : "2025-11-20 15:32:44 +0800", "id" : "111c49d62fd8f628c810a01afac5671d9c76c540", "msg" : "chore: ssep改善脱困模式搜索效果", "paths" : [ { "editType" : "edit", "file" : "ssep/influence_map/sl_projection_map.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/ref_line_cost_computer.h" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "ssep/influence_map/sl_projection_map.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/evaluator.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/hybrid_a_star.hpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/hybrid_a_star.hpp" ], "commitId" : "4dd872d2412f0cd5aa4fe97ab7c610b75201c295", "timestamp" : 1763697848000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: disable optimizer in ssep\u000a\u000a", "date" : "2025-11-21 12:04:08 +0800", "id" : "4dd872d2412f0cd5aa4fe97ab7c610b75201c295", "msg" : "fix: disable optimizer in ssep", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/hybrid_a_star.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/routing_extension/routing_data.cpp" ], "commitId" : "1ee73ca3ea923c5b7ab469ff08a51f619e2eeed9", "timestamp" : 1763702987000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:暂时关闭路口延长的逻辑\u000a\u000a", "date" : "2025-11-21 13:29:47 +0800", "id" : "1ee73ca3ea923c5b7ab469ff08a51f619e2eeed9", "msg" : "feat:暂时关闭路口延长的逻辑", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/routing_extension/routing_data.cpp" ], "commitId" : "bc246aebbd468c8098c136dd8423598bd30c0217", "timestamp" : 1763706358000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:暂时关闭路口延长的逻辑\u000a\u000a", "date" : "2025-11-21 14:25:58 +0800", "id" : "bc246aebbd468c8098c136dd8423598bd30c0217", "msg" : "feat:暂时关闭路口延长的逻辑", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.hpp", "ssep/scenarios/truck_bulk_yark_in_out_planner.h", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "tasks/plan/ssep_task.hpp", "data/config/cfg_func_sw.hpp", "ssep/data_structures/path.h", "CMakeLists.txt", "ssep/scenarios/imv_exit_parking_spot_planner.h", "ssep/scenarios/two_stage_planner_composer.h", "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.cc", "ssep/scenarios/imv_enter_station_planner.h", "ssep/scenarios/imv_general_planner.h", "ssep/scenarios/truck_u_turn_planner.h", "ssep/conf/ssep_preprocess.yaml", "data/ssep/ssep_ec.hpp", "data/ssep/ssep_activation.hpp", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "data/ssep/hmi_virtual_obs.hpp", "ssep/scenarios/truck_multi_segment_parking_planner.h", "data/ssep/ssep_activation.cpp", "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/common/status_macros.h", "ssep/scenarios/legacy_planner.h", "data/config/cfg_ssep.cpp", "data/ssep/reverse_ec.cpp", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/scenarios/scenario_planner_factory.h", "ssep/influence_map/sl_projection_map.cc", "ssep/ssep_planner.h", "data/config/cfg_ssep.hpp", "ssep/main_test/main_ssep_input.cc", "ssep/scenarios/stitching_replanner.h", "data/plan_frame.hpp", "hmi/draw/draw_map.cpp", "ssep/ssep_planner.cc", "ssep/scenarios/imv_pullover_planner.h", "ssep/coarse_search/hybrid_a_star.hpp" ], "commitId" : "c3b7d976f9d6cae8de65f45a3fe04ca9c766832b", "timestamp" : 1763706729000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP 重构大框架完成并通过自测\u000a\u000a", "date" : "2025-11-21 14:32:09 +0800", "id" : "c3b7d976f9d6cae8de65f45a3fe04ca9c766832b", "msg" : "chore: SSEP 重构大框架完成并通过自测", "paths" : [ { "editType" : "edit", "file" : "ssep/influence_map/sl_projection_map.cc" }, { "editType" : "add", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "add", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" }, { "editType" : "edit", "file" : "data/config/cfg_func_sw.hpp" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" }, { "editType" : "add", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/u_turn_insertion_maneuver_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/common/status_macros.h" }, { "editType" : "add", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/conf/ssep_preprocess.yaml" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_u_turn_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.h" }, { "editType" : "edit", "file" : "data/ssep/hmi_virtual_obs.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_ssep.cpp" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "add", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" }, { "editType" : "add", "file" : "ssep/scenarios/two_stage_planner_composer.h" }, { "editType" : "edit", "file" : "CMakeLists.txt" }, { "editType" : "edit", "file" : "data/plan/ssep_data.hpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_map.cpp" }, { "editType" : "add", "file" : "ssep/scenarios/imv_pullover_planner.h" }, { "editType" : "add", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "data/ssep/ssep_activation.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.hpp" }, { "editType" : "edit", "file" : "ssep/main_test/main_ssep_input.cc" }, { "editType" : "edit", "file" : "data/ssep/ssep_activation.hpp" }, { "editType" : "edit", "file" : "tasks/plan/ssep_task.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_ssep.hpp" }, { "editType" : "edit", "file" : "data/ssep/reverse_ec.cpp" }, { "editType" : "add", "file" : "ssep/scenarios/imv_enter_station_planner.h" }, { "editType" : "edit", "file" : "data/plan_frame.hpp" }, { "editType" : "delete", "file" : "ssep/coarse_search/hybrid_a_star.hpp" }, { "editType" : "edit", "file" : "ssep/data_structures/path.h" }, { "editType" : "add", "file" : "ssep/scenarios/imv_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.h" }, { "editType" : "add", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "add", "file" : "ssep/scenarios/stitching_replanner.h" }, { "editType" : "add", "file" : "ssep/scenarios/legacy_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/routing_extension/routing_data.cpp", "data/map/pnc_map/pnc_map.cpp" ], "commitId" : "21d0a0630541c9971aa77cf30ae0e07d2f098dc9", "timestamp" : 1763710745000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using successors to extend bend lane laterally.\u000a", "date" : "2025-11-21 15:39:05 +0800", "id" : "21d0a0630541c9971aa77cf30ae0e07d2f098dc9", "msg" : "fix: using successors to extend bend lane laterally.", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/routing_extension/routing_data.cpp", "data/map/pnc_map/pnc_map.cpp" ], "commitId" : "04d8c8aa9f1074d7cbcdef5454f8d1a1d5f1f468", "timestamp" : 1763710762000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using successors to extend bend lane laterally.\u000a\u000a", "date" : "2025-11-21 15:39:22 +0800", "id" : "04d8c8aa9f1074d7cbcdef5454f8d1a1d5f1f468", "msg" : "fix: using successors to extend bend lane laterally.", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_bulk_yark_in_out_planner.h", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/scenarios/imv_exit_parking_spot_planner.h", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h", "ssep/scenarios/imv_general_planner.h", "ssep/scenarios/imv_enter_station_planner.h", "ssep/scenarios/truck_u_turn_planner.h", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "ssep/scenarios/truck_multi_segment_parking_planner.h", "data/ssep/ssep_activation.cpp", "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc", "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/scenarios/legacy_planner.h", "ssep/common/status_macros.h", "ssep/scenarios/truck_fuzzy_reversing_planner.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/scenarios/scenario_planner_factory.h", "ssep/ssep_planner.h", "ssep/main_test/main_ssep_input.cc", "ssep/scenarios/stitching_replanner.h", "ssep/ssep_planner.cc", "ssep/scenarios/imv_pullover_planner.h" ], "commitId" : "e6f28eaa7f58d13b833f9c5492024b17a288214c", "timestamp" : 1763714771000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: ssep: 补充重构时缺少的remote guide line处理逻辑\u000a\u000a", "date" : "2025-11-21 16:46:11 +0800", "id" : "e6f28eaa7f58d13b833f9c5492024b17a288214c", "msg" : "fix: ssep: 补充重构时缺少的remote guide line处理逻辑", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/legacy_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_u_turn_planner.h" }, { "editType" : "edit", "file" : "ssep/common/status_macros.h" }, { "editType" : "edit", "file" : "data/ssep/ssep_activation.cpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/main_test/main_ssep_input.cc" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/stitching_replanner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_pullover_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp", "data/ssep/forward_ec.cpp" ], "commitId" : "2218678bbf773ff99623e27b8997aad3e7e8497f", "timestamp" : 1763716238000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: 修复错误进入多段出停车位场景的问题\u000a\u000a", "date" : "2025-11-21 17:10:38 +0800", "id" : "2218678bbf773ff99623e27b8997aad3e7e8497f", "msg" : "fix: 修复错误进入多段出停车位场景的问题", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp", "data/ssep/forward_ec.cpp" ], "commitId" : "5f9cb077277608f938c61dc3af73a6f0d6a15e60", "timestamp" : 1763716305000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: 修复错误进入多段出停车位场景的问题\u000a\u000a", "date" : "2025-11-21 17:11:45 +0800", "id" : "5f9cb077277608f938c61dc3af73a6f0d6a15e60", "msg" : "fix: 修复错误进入多段出停车位场景的问题", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.cpp" ], "commitId" : "fb03da3117413c1798e25a770b131d40e8eae298", "timestamp" : 1763725554000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: 修复友谊关场景错误\u000a\u000a", "date" : "2025-11-21 19:45:54 +0800", "id" : "fb03da3117413c1798e25a770b131d40e8eae298", "msg" : "chore: 修复友谊关场景错误", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "ssep/keb_optimizer/cost_features/ref_line_cost.h", "ssep/scenarios/legacy_planner.h", "ssep/common/status_macros.h", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/keb_optimizer/imv_keb_optimizer.cc", "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/data_structures/path.h", "ssep/keb_optimizer/keb_problem.cc", "ssep/main_test/main_ssep_input.cc", "ssep/keb_optimizer/keb_utils.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h", "ssep/conf/ssep_preprocess.yaml", "ssep/scenarios/stitching_replanner.h", "ssep/keb_optimizer/keb_problem.h", "ssep/ssep_planner.cc", "ssep/data_structures/ssep_scenario_type.hpp", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "data/ssep/ssep_ec.cpp" ], "commitId" : "694417b021234b3f36ec2f82366def6466f16cff", "timestamp" : 1763730327000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 改进集卡多段倒车\u000a", "date" : "2025-11-21 21:05:27 +0800", "id" : "694417b021234b3f36ec2f82366def6466f16cff", "msg" : "chore: SSEP: 改进集卡多段倒车", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_utils.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/legacy_planner.h" }, { "editType" : "edit", "file" : "ssep/conf/ssep_preprocess.yaml" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/ref_line_cost.h" }, { "editType" : "edit", "file" : "ssep/scenarios/stitching_replanner.h" }, { "editType" : "edit", "file" : "ssep/main_test/main_ssep_input.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/data_structures/path.h" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_scenario_type.hpp" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/common/status_macros.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" ], "commitId" : "f2d2a984f26c9802d6f4f5762ef00d138a3d364a", "timestamp" : 1763731133000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: minor update.\u000a\u000a", "date" : "2025-11-21 21:18:53 +0800", "id" : "f2d2a984f26c9802d6f4f5762ef00d138a3d364a", "msg" : "chore: minor update.", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/path_direction_data.cpp" ], "commitId" : "db4a8d613e20ebddf164e56ba3438f4258c4a892", "timestamp" : 1763972255000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:道路方案判断的阈值参数化\u000a\u000a", "date" : "2025-11-24 16:17:35 +0800", "id" : "db4a8d613e20ebddf164e56ba3438f4258c4a892", "msg" : "feat:道路方案判断的阈值参数化", "paths" : [ { "editType" : "edit", "file" : "data/plan/path_direction_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_ogm.cpp", "ssep/data_structures/type_definition.h", "ssep/main_test/main_ssep_input.cc", "ssep/data_structures/type_definition.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/coarse_search/geometric_search_visualizer.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h", "ssep/coarse_search/geometric_search_visualizer.h", "ssep/keb_optimizer/keb_problem.h", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/keb_optimizer/cost_features/jack_knife_constraint.h", "ssep/keb_optimizer/keb_problem.cc" ], "commitId" : "25df17150cb26dd269613224aa2b99dbbe5c2342", "timestamp" : 1763990272000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: ssep优化时增加对集卡车头车挂夹角的限制\u000a\u000a", "date" : "2025-11-24 21:17:52 +0800", "id" : "25df17150cb26dd269613224aa2b99dbbe5c2342", "msg" : "feat: ssep优化时增加对集卡车头车挂夹角的限制", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/geometric_search_visualizer.cc" }, { "editType" : "edit", "file" : "ssep/data_structures/type_definition.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/geometric_search_visualizer.h" }, { "editType" : "add", "file" : "ssep/keb_optimizer/cost_features/jack_knife_constraint.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/main_test/main_ssep_input.cc" }, { "editType" : "edit", "file" : "ssep/data_structures/type_definition.cc" }, { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/road_segments.cpp" ], "commitId" : "b0729c99173ebea3c924d628486111f8294e18b9", "timestamp" : 1764039785000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: is_lane_begin_and_end_same.\u000a\u000a", "date" : "2025-11-25 11:03:05 +0800", "id" : "b0729c99173ebea3c924d628486111f8294e18b9", "msg" : "fix: is_lane_begin_and_end_same.", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/road_segments.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc", "ssep/data_structures/directional_path.cc", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/data_structures/directional_path.h" ], "commitId" : "39388936a03ebff2fc5b16f016752aba9b48a557", "timestamp" : 1764040259000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 脱困模式生成多段路径时，检测并去除过短的路径段。\u000a\u000a", "date" : "2025-11-25 11:10:59 +0800", "id" : "39388936a03ebff2fc5b16f016752aba9b48a557", "msg" : "feat: SSEP: 脱困模式生成多段路径时，检测并去除过短的路径段。", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" }, { "editType" : "edit", "file" : "ssep/data_structures/directional_path.h" }, { "editType" : "edit", "file" : "ssep/data_structures/directional_path.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_general_planner.h", "data/ssep/ssep_ec.cpp", "ssep/scenarios/scenario_planner_factory.h" ], "commitId" : "90d7d354bef1e938e6204114b4d995b9c95db83c", "timestamp" : 1764041887000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: 修复威海bulk out搜索失败的问题\u000a\u000a", "date" : "2025-11-25 11:38:07 +0800", "id" : "90d7d354bef1e938e6204114b4d995b9c95db83c", "msg" : "fix: 修复威海bulk out搜索失败的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/keb_optimizer/rigid_truck_keb_optimizer.h", "ssep/scenarios/legacy_planner.h", "ssep/scenarios/truck_u_turn_planner.h", "ssep/scenarios/truck_bulk_yark_in_out_planner.h", "ssep/tools/executable/inference_ml_trajectory_cli.cc", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "ssep/scenarios/truck_fuzzy_reversing_planner.h", "ssep/scenarios/stitching_replanner.h", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/scenarios/truck_multi_segment_parking_planner.h" ], "commitId" : "829aa3a6235928f509fd91e2cf6d56bbab388dab", "timestamp" : 1764047463000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 脱困模式优化器提高参考线权重\u000a\u000a", "date" : "2025-11-25 13:11:03 +0800", "id" : "829aa3a6235928f509fd91e2cf6d56bbab388dab", "msg" : "chore: SSEP: 脱困模式优化器提高参考线权重", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/legacy_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/stitching_replanner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.h" }, { "editType" : "edit", "file" : "ssep/tools/executable/inference_ml_trajectory_cli.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_u_turn_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_ogm.cpp", "data/config/cfg_func_sw.hpp", "data/config/cfg_func_sw.cpp", "plan/prepare/prepare_ogm.hpp" ], "commitId" : "971e7a3af80ea5c6e66287f9c5c6e2415530465c", "timestamp" : 1764053434000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:添加超时框停车的功能\u000a\u000a", "date" : "2025-11-25 14:50:34 +0800", "id" : "971e7a3af80ea5c6e66287f9c5c6e2415530465c", "msg" : "feat:添加超时框停车的功能", "paths" : [ { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_func_sw.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_func_sw.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/long_decider/time_path_graph_decider.cpp" ], "commitId" : "ff2ea2da831706262c0456278f0701ee742eef47", "timestamp" : 1764053434000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整rss 安全判断\u000a\u000a", "date" : "2025-11-25 14:50:34 +0800", "id" : "ff2ea2da831706262c0456278f0701ee742eef47", "msg" : "feat:调整rss 安全判断", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/long_decider/time_path_graph_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hmi/draw/draw_intersection.cpp", "hmi/draw/draw_map.cpp" ], "commitId" : "362410abb2d2288c22d30c802535c353f8a6c899", "timestamp" : 1764053434000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整云端障碍物的显示\u000a\u000a", "date" : "2025-11-25 14:50:34 +0800", "id" : "362410abb2d2288c22d30c802535c353f8a6c899", "msg" : "feat:调整云端障碍物的显示", "paths" : [ { "editType" : "edit", "file" : "hmi/draw/draw_map.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_intersection.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "ssep/keb_optimizer/cost_features/ref_line_cost.h", "ssep/keb_optimizer/rigid_truck_keb_optimizer.h", "data/plan/ssep_data.hpp", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "data/obstacle/ogm.hpp", "ssep/keb_optimizer/imv_keb_optimizer.cc", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/keb_optimizer/keb_problem.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h", "ssep/keb_optimizer/keb_problem.h", "data/plan_frame.hpp" ], "commitId" : "6a5507907c3af07ed88e61b74e159a2344ed70e0", "timestamp" : 1764057207000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: 改进集卡SSEP路径延长策略。跑通苏溪集卡出停车位场景。\u000a\u000a", "date" : "2025-11-25 15:53:27 +0800", "id" : "6a5507907c3af07ed88e61b74e159a2344ed70e0", "msg" : "feat: 改进集卡SSEP路径延长策略。跑通苏溪集卡出停车位场景。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "data/plan/ssep_data.hpp" }, { "editType" : "edit", "file" : "data/plan_frame.hpp" }, { "editType" : "edit", "file" : "data/obstacle/ogm.hpp" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/ref_line_cost.h" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/reaction/app_reaction.hpp", "data/app/reaction/app_reaction.cpp", "hmi/draw/draw_map.cpp", "data/other/flow_control.cpp" ], "commitId" : "3df6ca32cb43e02e72050e37f90a1ab521ed57a1", "timestamp" : 1764058122000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:引导线的序列化\u000a\u000a", "date" : "2025-11-25 16:08:42 +0800", "id" : "3df6ca32cb43e02e72050e37f90a1ab521ed57a1", "msg" : "feat:引导线的序列化", "paths" : [ { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/app/reaction/app_reaction.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_map.cpp" }, { "editType" : "edit", "file" : "data/app/reaction/app_reaction.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/lattice/path_time_graph.cpp" ], "commitId" : "2620ff25e73f69bcf7bf8357bbf8ebc92dc18676", "timestamp" : 1764058156000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:限制忽略预测的最小距离阈值\u000a\u000a", "date" : "2025-11-25 16:09:16 +0800", "id" : "2620ff25e73f69bcf7bf8357bbf8ebc92dc18676", "msg" : "feat:限制忽略预测的最小距离阈值", "paths" : [ { "editType" : "edit", "file" : "data/lattice/path_time_graph.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/ssep_ec.hpp", "hmi/draw/draw_ssep.cpp", "data/plan_frame.hpp", "data/ssep/ssep_util.hpp", "data/ssep/ssep_ec.cpp", "data/ssep/ssep_util.cpp" ], "commitId" : "3553c87f1de2ecd72ea99b8b9c3bd3bb454f4f7d", "timestamp" : 1764063282000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor:优化ssep og lines的序列化\u000a\u000a", "date" : "2025-11-25 17:34:42 +0800", "id" : "3553c87f1de2ecd72ea99b8b9c3bd3bb454f4f7d", "msg" : "refactor:优化ssep og lines的序列化", "paths" : [ { "editType" : "edit", "file" : "data/ssep/ssep_ec.cpp" }, { "editType" : "edit", "file" : "data/plan_frame.hpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_ssep.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_ec.hpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_util.cpp" }, { "editType" : "edit", "file" : "data/ssep/ssep_util.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hmi/widget/replayer_pnc_mat.cpp" ], "commitId" : "8082aa4655f9247387e2a72f9241981999c93309", "timestamp" : 1764065765000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:replayer ogm lines显示的开关\u000a\u000a", "date" : "2025-11-25 18:16:05 +0800", "id" : "8082aa4655f9247387e2a72f9241981999c93309", "msg" : "fix:replayer ogm lines显示的开关", "paths" : [ { "editType" : "edit", "file" : "hmi/widget/replayer_pnc_mat.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "f05c3a348aec142cf0825bee9bb51239f8761f71", "timestamp" : 1764066220000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 改善杨浦低贝位进堆场轨迹扭曲的问题\u000a\u000a", "date" : "2025-11-25 18:23:40 +0800", "id" : "f05c3a348aec142cf0825bee9bb51239f8761f71", "msg" : "chore: SSEP: 改善杨浦低贝位进堆场轨迹扭曲的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "data/app/fsm/task_fsm/task_travel/task_travel_fsm.cpp", "data/other/flow_control.cpp", "data/vehicle/request_routing_data.cpp", "data/ssep/forward_ec.cpp", "data/map/pnc_map/routing_extension/routing_data.hpp", "data/ssep/normal_junction_ec.cpp", "data/lattice/trajectory_evaluator.cpp", "data/map/pnc_map/routing_extension/routing_data.cpp", "data/vehicle/vehicle_destination.cpp" ], "commitId" : "805b100be6b6300dc5614dd462775a539e040625", "timestamp" : 1764143606000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:优化imv 出停车位的相关逻辑\u000a\u000a", "date" : "2025-11-26 15:53:26 +0800", "id" : "805b100be6b6300dc5614dd462775a539e040625", "msg" : "feat:优化imv 出停车位的相关逻辑", "paths" : [ { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_travel/task_travel_fsm.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.hpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" }, { "editType" : "edit", "file" : "data/vehicle/request_routing_data.cpp" }, { "editType" : "edit", "file" : "data/ssep/normal_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/vehicle/vehicle_destination.cpp" }, { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" }, { "editType" : "edit", "file" : "data/lattice/trajectory_evaluator.cpp" }, { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/keb_optimizer/cost_features/ref_line_cost.h", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.cc", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h", "ssep/keb_optimizer/imv_keb_optimizer.cc", "ssep/keb_optimizer/keb_problem.h", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/keb_optimizer/keb_problem.cc" ], "commitId" : "8565ed504f64d38a0ae555590a3799263921df3b", "timestamp" : 1764143720000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:集卡出停车位 多段路径搜索参数调优(wenqing)\u000a\u000a", "date" : "2025-11-26 15:55:20 +0800", "id" : "8565ed504f64d38a0ae555590a3799263921df3b", "msg" : "feat:集卡出停车位 多段路径搜索参数调优(wenqing)", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/ref_line_cost.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/keb_optimizer/cost_features/path_length_cost.h", "ssep/data_structures/path.h", "ssep/scenarios/imv_exit_parking_spot_planner.h", "ssep/keb_optimizer/keb_problem.cc" ], "commitId" : "b80c06355e9e6f59c51aa1b58ec2b76eb95ac280", "timestamp" : 1764148002000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复IMV的either-facing搜索模式反向搜索成功率低的问题\u000a\u000a", "date" : "2025-11-26 17:06:42 +0800", "id" : "b80c06355e9e6f59c51aa1b58ec2b76eb95ac280", "msg" : "fix: SSEP: 修复IMV的either-facing搜索模式反向搜索成功率低的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/path_length_cost.h" }, { "editType" : "edit", "file" : "ssep/data_structures/path.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/imv_general_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/switch_data.cpp" ], "commitId" : "aaa7d395555a3704da669771dbe2c2116f3e6271", "timestamp" : 1764150811000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:优化极限变道安全的校验\u000a\u000a", "date" : "2025-11-26 17:53:31 +0800", "id" : "aaa7d395555a3704da669771dbe2c2116f3e6271", "msg" : "fix:优化极限变道安全的校验", "paths" : [ { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_env_const.cpp", "data/map/pnc_map/routing_extension/routing_data.cpp" ], "commitId" : "4fcc341547291f5d054e6ccad379e0ded350204c", "timestamp" : 1764150877000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:进堆场弯道后目标车道选择时， 匹配失败的bug\u000a\u000a", "date" : "2025-11-26 17:54:37 +0800", "id" : "4fcc341547291f5d054e6ccad379e0ded350204c", "msg" : "fix:进堆场弯道后目标车道选择时， 匹配失败的bug", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/keb_optimizer/rigid_truck_keb_optimizer.h", "ssep/scenarios/truck_bulk_yark_in_out_planner.h", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h", "ssep/scenarios/imv_exit_parking_spot_planner.h", "ssep/keb_optimizer/keb_problem.cc", "ssep/scenarios/imv_enter_station_planner.h", "ssep/scenarios/imv_general_planner.h", "ssep/scenarios/truck_u_turn_planner.h", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "ssep/scenarios/truck_multi_segment_parking_planner.h", "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/scenarios/legacy_planner.h", "ssep/common/status_macros.h", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "ssep/scenarios/truck_fuzzy_reversing_planner.h", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/keb_optimizer/imv_keb_optimizer.h", "ssep/keb_optimizer/imv_keb_optimizer.cc", "ssep/scenarios/tractor_trailer_general_planner.h", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/tools/executable/inference_ml_trajectory_cli.cc", "ssep/scenarios/stitching_replanner.h", "ssep/keb_optimizer/keb_problem.h", "ssep/scenarios/imv_pullover_planner.h" ], "commitId" : "145ab40e2330cdc6e1bb81e3087ccbc0a823cb9b", "timestamp" : 1764153468000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 解决IMV优化器效果差的问题，取消参考线heading跟踪。\u000a\u000a", "date" : "2025-11-26 18:37:48 +0800", "id" : "145ab40e2330cdc6e1bb81e3087ccbc0a823cb9b", "msg" : "fix: SSEP: 解决IMV优化器效果差的问题，取消参考线heading跟踪。", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_enter_station_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/stitching_replanner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_pullover_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/imv_exit_parking_spot_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/tools/executable/inference_ml_trajectory_cli.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/scenarios/legacy_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_u_turn_planner.h" }, { "editType" : "edit", "file" : "ssep/common/status_macros.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/scenarios/tractor_trailer_enter_yard_planner.h", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" ], "commitId" : "889fac0e57688396297aa13ef1179d1f9c36828d", "timestamp" : 1764158881000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP 调整集卡进堆场参数\u000a\u000a", "date" : "2025-11-26 20:08:01 +0800", "id" : "889fac0e57688396297aa13ef1179d1f9c36828d", "msg" : "chore: SSEP 调整集卡进堆场参数", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "source/ros_source_ads_target.cpp" ], "commitId" : "2b5cfd358e9da32871c9018ce255290d14504fb5", "timestamp" : 1764232655000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:target 任务 终点保存的bug\u000a\u000a", "date" : "2025-11-27 16:37:35 +0800", "id" : "2b5cfd358e9da32871c9018ce255290d14504fb5", "msg" : "fix:target 任务 终点保存的bug", "paths" : [ { "editType" : "edit", "file" : "source/ros_source_ads_target.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/ssep_data.cpp", "data/other/flow_control.cpp", "data/app/fsm/task_fsm/task_fsm.cpp", "data/plan/guide_line.cpp", "data/ssep/forward_ec.cpp", "data/map/pnc_map/routing_extension/routing_data.cpp", "data/map/envelop/map_envelops.cpp", "data/vehicle/vehicle_destination.cpp" ], "commitId" : "50994d1621d04ced88b3fe774380bc2439ab9acb", "timestamp" : 1764234421000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:imv和集卡进出停车的适配\u000a\u000a", "date" : "2025-11-27 17:07:01 +0800", "id" : "50994d1621d04ced88b3fe774380bc2439ab9acb", "msg" : "fix:imv和集卡进出停车的适配", "paths" : [ { "editType" : "edit", "file" : "data/map/envelop/map_envelops.cpp" }, { "editType" : "edit", "file" : "data/vehicle/vehicle_destination.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/routing_extension/routing_data.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" }, { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" }, { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_travel/task_travel_fsm.cpp" ], "commitId" : "89a3c1c0f32840be2f8f71371f83f7eac2246230", "timestamp" : 1764234474000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:优化切换bulk in的条件\u000a\u000a", "date" : "2025-11-27 17:07:54 +0800", "id" : "89a3c1c0f32840be2f8f71371f83f7eac2246230", "msg" : "feat:优化切换bulk in的条件", "paths" : [ { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_travel/task_travel_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/legacy_planner.h", "ssep/scenarios/tractor_trailer_general_planner.h", "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "958eab24ef3a3a9163252f075e460cd713242f9e", "timestamp" : 1764239945000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:苏溪 进堆场堆场和普通路口搜索参数调优\u000a\u000a", "date" : "2025-11-27 18:39:05 +0800", "id" : "958eab24ef3a3a9163252f075e460cd713242f9e", "msg" : "feat:苏溪 进堆场堆场和普通路口搜索参数调优", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_general_planner.h" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "ssep/scenarios/legacy_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/legacy_planner.h" ], "commitId" : "c80155ab0be6bc0c7f4885328614e92a18040999", "timestamp" : 1764240545000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:优化路口搜索\u000a\u000a", "date" : "2025-11-27 18:49:05 +0800", "id" : "c80155ab0be6bc0c7f4885328614e92a18040999", "msg" : "feat:优化路口搜索", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/legacy_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/guide_line.cpp", "tasks/other_tasks/stitch_path_data_to_path.cpp" ], "commitId" : "078c0d0bd033d4bf2b8657cfc69a8a6371f2cdcc", "timestamp" : 1764263333000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:car 动态搜索相关问题适配\u000a\u000a", "date" : "2025-11-28 01:08:53 +0800", "id" : "078c0d0bd033d4bf2b8657cfc69a8a6371f2cdcc", "msg" : "feat:car 动态搜索相关问题适配", "paths" : [ { "editType" : "edit", "file" : "data/plan/guide_line.cpp" }, { "editType" : "edit", "file" : "tasks/other_tasks/stitch_path_data_to_path.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "06c86ac68f946f12dc982060a022a87e1373c2c1", "timestamp" : 1764296152000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: start up boundary optimization.\u000a\u000a", "date" : "2025-11-28 10:15:52 +0800", "id" : "06c86ac68f946f12dc982060a022a87e1373c2c1", "msg" : "fix: start up boundary optimization.", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "6fe5fb5780a605fb350b6695ab1c6dd571671fb5", "timestamp" : 1764296221000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: stacker crane wbca smooth mode thr.\u000a\u000a", "date" : "2025-11-28 10:17:01 +0800", "id" : "6fe5fb5780a605fb350b6695ab1c6dd571671fb5", "msg" : "fix: stacker crane wbca smooth mode thr.", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/boundary/road_boundary.cpp" ], "commitId" : "cd1ea5f69ba312c6a243a99b9d4a55866e934c49", "timestamp" : 1764296226000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "feat: low bay operation smooth\u000a\u000a", "date" : "2025-11-28 10:17:06 +0800", "id" : "cd1ea5f69ba312c6a243a99b9d4a55866e934c49", "msg" : "feat: low bay operation smooth", "paths" : [ { "editType" : "edit", "file" : "data/boundary/road_boundary.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/forward_ec.cpp" ], "commitId" : "128245d69b94c0d9fafe2f6392d9b9e9faaeb665", "timestamp" : 1764300546000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: 太阳纸业适配reversing driving进货堆\u000a\u000a", "date" : "2025-11-28 11:29:06 +0800", "id" : "128245d69b94c0d9fafe2f6392d9b9e9faaeb665", "msg" : "chore: 太阳纸业适配reversing driving进货堆", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "algorithm/wbca/imv_wbca_manager.hpp", "algorithm/wbca/imv_wbca_manager.cpp", "algorithm/wbca/wbca_manager.hpp" ], "commitId" : "a528f464122f3728ac5605bd25cf1431b3279cbd", "timestamp" : 1764302428000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "feat: add UpdateRouteForSmoothMode\u000a\u000a", "date" : "2025-11-28 12:00:28 +0800", "id" : "a528f464122f3728ac5605bd25cf1431b3279cbd", "msg" : "feat: add UpdateRouteForSmoothMode", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/imv_wbca_manager.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/imv_wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/vehicle_destination.cpp" ], "commitId" : "3534a6cee5c3d60d9b6b80f6e15d9f909cbc7ae5", "timestamp" : 1764431727000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复货堆任务无法自动起步的bug\u000a\u000a", "date" : "2025-11-29 23:55:27 +0800", "id" : "3534a6cee5c3d60d9b6b80f6e15d9f909cbc7ae5", "msg" : "fix:修复货堆任务无法自动起步的bug", "paths" : [ { "editType" : "edit", "file" : "data/vehicle/vehicle_destination.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/occupancy_grid_map/data_render.cpp" ], "commitId" : "cc359d469af660bf0848258035f9d15deb0460fd", "timestamp" : 1764568728000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: wbca crash issue.\u000a\u000a", "date" : "2025-12-01 13:58:48 +0800", "id" : "cc359d469af660bf0848258035f9d15deb0460fd", "msg" : "fix: wbca crash issue.", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/occupancy_grid_map/data_render.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/scenarios/truck_bulk_yark_in_out_planner.cc", "ssep/coarse_search/reference_line_snapper.h", "ssep/coarse_search/conditions/search_condition_interface.h", "ssep/scenarios/truck_bulk_yark_in_out_planner.h", "ssep/scenarios/truck_fuzzy_reversing_planner.h", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc", "ssep/scenarios/scenario_planner_factory.h", "ssep/scenarios/truck_remote_guided_escape_planner.h", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc", "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.h", "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h", "ssep/data_structures/polyline.cc", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.h", "ssep/scenarios/truck_u_turn_planner.h", "ssep/coarse_search/conditions/inside_yard_condition.h", "ssep/scenarios/truck_multi_segment_parking_planner.h", "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc", "ssep/coarse_search/ml_path_validator.h" ], "commitId" : "f58c1fde82bd44ded56276984b44942a5d797c74", "timestamp" : 1764583303000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: SSEP: 进出堆场多段搜索的步骤切换条件改进 -- 现在可以不按最近的堆场口进入堆场\u000a\u000a", "date" : "2025-12-01 18:01:43 +0800", "id" : "f58c1fde82bd44ded56276984b44942a5d797c74", "msg" : "chore: SSEP: 进出堆场多段搜索的步骤切换条件改进 -- 现在可以不按最近的堆场口进入堆场", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/reference_line_snapper.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/conditions/search_condition_interface.h" }, { "editType" : "edit", "file" : "ssep/data_structures/polyline.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_fuzzy_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_remote_guided_escape_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/ml_path_validator.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_u_turn_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/truck_reference_following_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.h" }, { "editType" : "add", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/conditions/inside_yard_condition.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/request_routing_data.cpp", "data/vehicle/vehicle_destination.cpp" ], "commitId" : "7e22f6d2d998077f63d5c261e31fd7c36a7ad872", "timestamp" : 1764583435000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:终点距离计算的问题\u000a\u000a", "date" : "2025-12-01 18:03:55 +0800", "id" : "7e22f6d2d998077f63d5c261e31fd7c36a7ad872", "msg" : "feat:终点距离计算的问题", "paths" : [ { "editType" : "edit", "file" : "data/vehicle/vehicle_destination.cpp" }, { "editType" : "edit", "file" : "data/vehicle/request_routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_fsm.cpp" ], "commitId" : "6cc69c7d59d11cf327ce2a04feae2cca93c62beb", "timestamp" : 1764583435000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:travel out 切换 bulk 的bug\u000a\u000a", "date" : "2025-12-01 18:03:55 +0800", "id" : "6cc69c7d59d11cf327ce2a04feae2cca93c62beb", "msg" : "feat:travel out 切换 bulk 的bug", "paths" : [ { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/motion_fsm/motion_fsm.cpp", "data/app/fsm/motion_fsm/motion_remote_fsm/motion_remote_fsm.cpp", "data/app/cmd/cmd_remote_ctrl.cpp" ], "commitId" : "2f7f4dddb0e312ad85ba15d2bfd250c0f9f3ca44", "timestamp" : 1764583435000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复remote状态机切换的bug\u000a\u000a", "date" : "2025-12-01 18:03:55 +0800", "id" : "2f7f4dddb0e312ad85ba15d2bfd250c0f9f3ca44", "msg" : "fix:修复remote状态机切换的bug", "paths" : [ { "editType" : "edit", "file" : "data/app/cmd/cmd_remote_ctrl.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/motion_fsm/motion_fsm.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/motion_fsm/motion_remote_fsm/motion_remote_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_bulk_yark_in_out_planner.cc" ], "commitId" : "2e40534d58f604f394834caafd29364e46aeead1", "timestamp" : 1764589677000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: ssep重新开启heatnet\u000a\u000a", "date" : "2025-12-01 19:47:57 +0800", "id" : "2e40534d58f604f394834caafd29364e46aeead1", "msg" : "fix: ssep重新开启heatnet", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/task_fsm/task_park_fsm/park_fsm_transition/bulk_transition.cpp", "data/config/cfg_safe_const.hpp", "data/config/cfg_safe_const.cpp" ], "commitId" : "9fc1feac717bb90c2b072a464693ae3e8fba9654", "timestamp" : 1764595839000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:bulk状态下，障碍物挡停 切换 bulk lock的阈值参数化\u000a\u000a", "date" : "2025-12-01 21:30:39 +0800", "id" : "9fc1feac717bb90c2b072a464693ae3e8fba9654", "msg" : "feat:bulk状态下，障碍物挡停 切换 bulk lock的阈值参数化", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.hpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_park_fsm/park_fsm_transition/bulk_transition.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/vehicle/request_routing_data.cpp" ], "commitId" : "a0d06ffd7ae527c56e15c9c655eecc63847683b2", "timestamp" : 1764645642000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:修复routing data 转换的问题\u000a\u000a", "date" : "2025-12-02 11:20:42 +0800", "id" : "a0d06ffd7ae527c56e15c9c655eecc63847683b2", "msg" : "feat:修复routing data 转换的问题", "paths" : [ { "editType" : "edit", "file" : "data/vehicle/request_routing_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_accurate_reversing_planner.h" ], "commitId" : "bd259073401b2664f130038f597f6d2bd30993ba", "timestamp" : 1764650270000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复倒车规划时初始方向向前的问题\u000a\u000a", "date" : "2025-12-02 12:37:50 +0800", "id" : "bd259073401b2664f130038f597f6d2bd30993ba", "msg" : "fix: SSEP: 修复倒车规划时初始方向向前的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "plan/prepare/prepare_ogm.cpp" ], "commitId" : "dd057811071f49efb4918ef01099f6d3a9542582", "timestamp" : 1764675017000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:过滤107 类型的点云\u000a\u000a", "date" : "2025-12-02 19:30:17 +0800", "id" : "dd057811071f49efb4918ef01099f6d3a9542582", "msg" : "feat:过滤107 类型的点云", "paths" : [ { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/cmd/cmd_remote_ctrl.cpp" ], "commitId" : "faba4b1c778c26b3f78a03adc0ba0332dba615a8", "timestamp" : 1764689334000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:远程步进超时的问题\u000a\u000a", "date" : "2025-12-02 23:28:54 +0800", "id" : "faba4b1c778c26b3f78a03adc0ba0332dba615a8", "msg" : "feat:远程步进超时的问题", "paths" : [ { "editType" : "edit", "file" : "data/app/cmd/cmd_remote_ctrl.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/forward_ec.cpp" ], "commitId" : "0e5f57de27ebae1d32b39594eb241092fe25342c", "timestamp" : 1764689350000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:出堆场场景赋值错误的bug\u000a\u000a", "date" : "2025-12-02 23:29:10 +0800", "id" : "0e5f57de27ebae1d32b39594eb241092fe25342c", "msg" : "feat:出堆场场景赋值错误的bug", "paths" : [ { "editType" : "edit", "file" : "data/ssep/forward_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_env_const.cpp" ], "commitId" : "d97a8913fa8bf38e38107a716c888138fcc4c555", "timestamp" : 1764735816000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:修复默认的步进速度\u000a\u000a", "date" : "2025-12-03 12:23:36 +0800", "id" : "d97a8913fa8bf38e38107a716c888138fcc4c555", "msg" : "feat:修复默认的步进速度", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" ], "commitId" : "21a312b06018d69d4e53225905df5043ff134ee9", "timestamp" : 1764740904000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "chore: SSEP: 改善集卡多段出停车位效果\u000a\u000a", "date" : "2025-12-03 13:48:24 +0800", "id" : "21a312b06018d69d4e53225905df5043ff134ee9", "msg" : "chore: SSEP: 改善集卡多段出停车位效果", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_exit_parking_spot_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_env_const.hpp", "plan/prepare/prepare_ogm.cpp", "data/other/flow_control.cpp", "plan/prepare/prepare_status.cpp", "data/config/cfg_env_const.cpp", "data/other/flow_control.hpp", "plan/prepare/prepare_ogm.hpp", "tasks/deciders/other_decider/stop_decider.cpp", "sink/ros_sink_ctrl_reference.cpp", "hmi/widget/diagnose.cpp", "data/config/cfg_safe_const.hpp", "data/plan/predict_path.cpp", "data/vehicle/vehicle_status.hpp", "data/config/cfg_safe_const.cpp", "data/vehicle/vehicle_status.cpp", "data/lattice/ogm_crash_data.cpp", "data/obstacle/obstacle_decider_attr.cpp", "sink/ros_sink_pnc_status.cpp" ], "commitId" : "a070758b45d37f6151bcf4310817a1189f0a2135", "timestamp" : 1764756280000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:整理安全防护\u000a\u000a", "date" : "2025-12-03 18:04:40 +0800", "id" : "a070758b45d37f6151bcf4310817a1189f0a2135", "msg" : "feat:整理安全防护", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_env_const.hpp" }, { "editType" : "edit", "file" : "hmi/widget/diagnose.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" }, { "editType" : "edit", "file" : "data/lattice/ogm_crash_data.cpp" }, { "editType" : "edit", "file" : "data/vehicle/vehicle_status.hpp" }, { "editType" : "edit", "file" : "data/vehicle/vehicle_status.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" }, { "editType" : "edit", "file" : "data/other/flow_control.hpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_status.cpp" }, { "editType" : "edit", "file" : "data/obstacle/obstacle_decider_attr.cpp" }, { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.hpp" }, { "editType" : "edit", "file" : "sink/ros_sink_ctrl_reference.cpp" }, { "editType" : "edit", "file" : "data/plan/predict_path.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.hpp" }, { "editType" : "edit", "file" : "tasks/deciders/other_decider/stop_decider.cpp" }, { "editType" : "edit", "file" : "sink/ros_sink_pnc_status.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc", "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc" ], "commitId" : "33839fa3fd7703979b0ba2219f2ba1365c6bdf39", "timestamp" : 1764756367000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复距离超视距框过近，搜索失败的bug\u000a\u000a", "date" : "2025-12-03 18:06:07 +0800", "id" : "33839fa3fd7703979b0ba2219f2ba1365c6bdf39", "msg" : "fix:修复距离超视距框过近，搜索失败的bug", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/predict_path.cpp", "data/config/cfg_safe_const.hpp", "data/config/cfg_safe_const.cpp" ], "commitId" : "543ce03650538f03454ee3ae19b4413979c2a53b", "timestamp" : 1764756928000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:调整ttc 预测轨迹\u000a\u000a", "date" : "2025-12-03 18:15:28 +0800", "id" : "543ce03650538f03454ee3ae19b4413979c2a53b", "msg" : "fix:调整ttc 预测轨迹", "paths" : [ { "editType" : "edit", "file" : "data/plan/predict_path.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/path_optimization_task.cpp" ], "commitId" : "972b7f7ddbd40d0d7790bd2f397a966d463ea50b", "timestamp" : 1764766736000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 太阳纸业场景适配\u000a\u000a", "date" : "2025-12-03 20:58:56 +0800", "id" : "972b7f7ddbd40d0d7790bd2f397a966d463ea50b", "msg" : "feat: 太阳纸业场景适配", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp" ], "commitId" : "a4ea13640165e8f74f283cb643ff624931d7a14e", "timestamp" : 1764766773000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:wcba求解路径过短的问题修复\u000a\u000a", "date" : "2025-12-03 20:59:33 +0800", "id" : "a4ea13640165e8f74f283cb643ff624931d7a14e", "msg" : "feat:wcba求解路径过短的问题修复", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "data/plan/ssep_data.cpp" ], "commitId" : "c6bfcc0b215f342209dda15c66761d51b47317fc", "timestamp" : 1764767533000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:wcba路径过短的问题\u000a\u000a", "date" : "2025-12-03 21:12:13 +0800", "id" : "c6bfcc0b215f342209dda15c66761d51b47317fc", "msg" : "fix:wcba路径过短的问题", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/imv_path_optimization.cpp" ], "commitId" : "67c7f7b98cbe9ee15d506e15e55bebec1b4cdbc3", "timestamp" : 1764819018000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: imv cost\u000a\u000a", "date" : "2025-12-04 11:30:18 +0800", "id" : "67c7f7b98cbe9ee15d506e15e55bebec1b4cdbc3", "msg" : "fix: imv cost", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/imv_path_optimization.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/evaluator/evaluator.h", "ssep/scenarios/truck_bulk_yark_in_out_planner.cc", "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc", "ssep/keb_optimizer/imv_keb_optimizer.cc", "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc", "ssep/data_structures/map_element_polyline.hpp", "ssep/data_structures/search_boundary.h", "ssep/data_structures/path.h", "ssep/data_structures/ssep_output.hpp", "ssep/keb_optimizer/keb_problem.cc", "ssep/data_structures/type_definition.h", "ssep/data_structures/directional_path.h", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/data_structures/ssep_input.hpp", "ssep/keb_optimizer/keb_problem.h", "ssep/coarse_search/evaluator/collision_cost_computer.h", "ssep/data_structures/ssep_scenario_type.hpp", "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc", "ssep/data_structures/pose.h" ], "commitId" : "5413b860f2b300b25dcad25300eecba5a1eb7bfb", "timestamp" : 1764826641000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: SSEP: 前进/后退时使用不同的碰撞检测策略。增加前进方向的额外碰撞检测。\u000a\u000a", "date" : "2025-12-04 13:37:21 +0800", "id" : "5413b860f2b300b25dcad25300eecba5a1eb7bfb", "msg" : "feat: SSEP: 前进/后退时使用不同的碰撞检测策略。增加前进方向的额外碰撞检测。", "paths" : [ { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/rigid_truck_general_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_output.hpp" }, { "editType" : "edit", "file" : "ssep/data_structures/type_definition.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/rigid_truck_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/evaluator.h" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_scenario_type.hpp" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/bulk_yard_in_out_path_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/data_structures/directional_path.h" }, { "editType" : "edit", "file" : "ssep/data_structures/ssep_input.hpp" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_bulk_yark_in_out_planner.cc" }, { "editType" : "edit", "file" : "ssep/data_structures/map_element_polyline.hpp" }, { "editType" : "edit", "file" : "ssep/data_structures/pose.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/data_structures/path.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/evaluator/collision_cost_computer.h" }, { "editType" : "edit", "file" : "ssep/data_structures/search_boundary.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/other_tasks/stitch_path_to_reference_line.cpp" ], "commitId" : "c24b7d04a7324e424b4542cea4f4e33b8e21350c", "timestamp" : 1764828080000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:参考线拼接的bug\u000a\u000a", "date" : "2025-12-04 14:01:20 +0800", "id" : "c24b7d04a7324e424b4542cea4f4e33b8e21350c", "msg" : "fix:参考线拼接的bug", "paths" : [ { "editType" : "edit", "file" : "tasks/other_tasks/stitch_path_to_reference_line.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp" ], "commitId" : "114d5dcaed7d91629f8c8efe87a79d3571ac3ced", "timestamp" : 1764849999000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "feat:wcba求解路径过短的问题修复\u000a\u000a", "date" : "2025-12-04 20:06:39 +0800", "id" : "114d5dcaed7d91629f8c8efe87a79d3571ac3ced", "msg" : "feat:wcba求解路径过短的问题修复", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "data/plan/ssep_data.cpp" ], "commitId" : "012f45533bb1d2beb5cb330355c3ac7992895458", "timestamp" : 1764850010000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix:wcba路径过短的问题\u000a\u000a", "date" : "2025-12-04 20:06:50 +0800", "id" : "012f45533bb1d2beb5cb330355c3ac7992895458", "msg" : "fix:wcba路径过短的问题", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "data/plan/ssep_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "algorithm/wbca/imv_wbca_manager.cpp", "data/wbca/wbca_data.hpp", "tasks/plan/path_optimization_task.cpp" ], "commitId" : "fa59b60ded3ea6f813d55fa15b94eefa4a050f08", "timestamp" : 1764855423000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, "authorEmail" : "5081703.cr@163.com", "comment" : "fix: using guide_line pt for smooth mode.\u000a\u000a", "date" : "2025-12-04 21:37:03 +0800", "id" : "fa59b60ded3ea6f813d55fa15b94eefa4a050f08", "msg" : "fix: using guide_line pt for smooth mode.", "paths" : [ { "editType" : "edit", "file" : "data/wbca/wbca_data.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/imv_wbca_manager.cpp" }, { "editType" : "edit", "file" : "tasks/plan/path_optimization_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sink/ros_sink_cloud_trajectory.cpp" ], "commitId" : "207061ce9e0d5520d8e3aa25e71f15ab72f5af63", "timestamp" : 1765263178000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:云端轨迹 is stop没有赋值的bug\u000a\u000a", "date" : "2025-12-09 14:52:58 +0800", "id" : "207061ce9e0d5520d8e3aa25e71f15ab72f5af63", "msg" : "fix:云端轨迹 is stop没有赋值的bug", "paths" : [ { "editType" : "edit", "file" : "sink/ros_sink_cloud_trajectory.cpp" } ] } ], "kind" : "git" }, { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "multi_sim_logic/data/objects_frame.cpp", "multi_sim_logic/data/prediction_frame.cpp", "multi_sim_logic/data/config/cfg_imv.cpp", "multi_sim_logic/data/objects_frame.hpp", "multi_sim_logic/mqtt_sink/mqtt_sink_objects.hpp", "multi_sim_logic/data/prediction_frame.hpp" ], "commitId" : "342fcdab3a4e1c1ae6bbe5480dc31c9ee0d9a099", "timestamp" : 1765259957000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, "authorEmail" : "zhaojianfeng2@senior.auto", "comment" : "feat_out:修复合并不完全问题\u000a", "date" : "2025-12-09 13:59:17 +0800", "id" : "342fcdab3a4e1c1ae6bbe5480dc31c9ee0d9a099", "msg" : "feat_out:修复合并不完全问题", "paths" : [ { "editType" : "edit", "file" : "multi_sim_logic/data/config/cfg_imv.cpp" }, { "editType" : "edit", "file" : "multi_sim_logic/data/prediction_frame.cpp" }, { "editType" : "edit", "file" : "multi_sim_logic/data/objects_frame.hpp" }, { "editType" : "edit", "file" : "multi_sim_logic/data/objects_frame.cpp" }, { "editType" : "edit", "file" : "multi_sim_logic/mqtt_sink/mqtt_sink_objects.hpp" }, { "editType" : "edit", "file" : "multi_sim_logic/data/prediction_frame.hpp" } ] } ], "kind" : "git" } ], "culprits" : [ { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" } ], "nextBuild" : { "number" : 850, "url" : "http://159.27.114.184:8080/jenkins/user/chenran/my-views/view/all/job/module-confname/850/" }, "previousBuild" : { "number" : 848, "url" : "http://159.27.114.184:8080/jenkins/user/chenran/my-views/view/all/job/module-confname/848/" } }