{ "_class" : "org.jenkinsci.plugins.workflow.job.WorkflowRun", "actions" : [ { "_class" : "hudson.model.ParametersAction", "parameters" : [ { "_class" : "hudson.model.StringParameterValue", "name" : "orin", "value" : "master" }, { "_class" : "hudson.model.StringParameterValue", "name" : "confList", "value" : "Get-Branchs" }, { "_class" : "hudson.model.StringParameterValue", "name" : "conf", "value" : "Could not get conf for confList" }, { "_class" : "hudson.model.StringParameterValue", "name" : "checkall", "value" : "yes" }, { "_class" : "hudson.model.StringParameterValue", "name" : "OTA", "value" : "public" }, { "_class" : "hudson.model.StringParameterValue", "name" : "region", "value" : "liangshangang" }, { "_class" : "hudson.model.StringParameterValue", "name" : "deviceChoice", "value" : "false" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msgBranch", "value" : "rc_dev_jiningliangshangang" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rslidarSDKBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rslidarSdkNewBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "cameraDriverBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "loginSyncToolBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "systemRosBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "thirdpartyBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "unifiedSystemMonitorBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rosBridgeBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdcontrolBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "versionsObserverBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "cacheBagNodeBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "systemMonitorBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "performanceAnalystBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "scheduleManagerBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "imvSpreaderDetectionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "craneAlignBranch", "value" : "dev_truck_comment_lh" }, { "_class" : "hudson.model.StringParameterValue", "name" : "mrpt2Branch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "warningModuleBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rminterpreterBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerOnlineBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rtspRelayerBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hesaiLidarBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "newTruckSpreaderDetectionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "rcinterpreterBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "pncBranch", "value" : "feat_trajectory" }, { "_class" : "hudson.model.StringParameterValue", "name" : "guardianBranch", "value" : "feat_yangpu" }, { "_class" : "hudson.model.StringParameterValue", "name" : "staticTransformBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msfLocBranch", "value" : "test_qingdao" }, { "_class" : "hudson.model.StringParameterValue", "name" : "msfAssistantBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "peripheralControllerBranch", "value" : "feat_jnlsg" }, { "_class" : "hudson.model.StringParameterValue", "name" : "predictionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "laneDetectionBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "dataCollectionBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "tosVisualizeBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "sinsCalibrationHmiBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "toolsBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "segmentationBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "controlBranch", "value" : "feat_creep_status" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapCloudBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "nodeManagerHmiBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "groundmarkerDetectionBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "calibrationToolsBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "simulatorBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "snapshotUploadBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "hdmapInterfaceBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "spreaderSegmentationBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "trafficLightDetectionBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "perceptionPublisherBranch", "value" : "rc_dev" }, { "_class" : "hudson.model.StringParameterValue", "name" : "avmBranch", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "v2Branch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "newDetectionBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "seniorCalibrationBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "doxBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "oleLidarBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "lidarCameraFusionBranch", "value" : "None-Branch" }, { "_class" : "hudson.model.StringParameterValue", "name" : "operate", "value" : "no" }, { "_class" : "hudson.model.StringParameterValue", "name" : "orinConf", "value" : "master" }, { "_class" : "hudson.model.StringParameterValue", "name" : "editConfName", "value" : "" }, { "_class" : "hudson.model.StringParameterValue", "name" : "notes", "value" : "梁山港主机全量（）" }, { "_class" : "hudson.model.StringParameterValue", "name" : "users", "value" : "" } ] }, { "_class" : "hudson.model.CauseAction", "causes" : [ { "_class" : "hudson.model.Cause$UserIdCause", "shortDescription" : "Started by user wangshaojiang", "userId" : "wangshaojiang", "userName" : "wangshaojiang" } ] }, { "_class" : "org.jenkinsci.plugins.workflow.libs.LibrariesAction" }, { }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "master" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "53c5327addf2f593bfa7af8a8bade8fe189f13c5", "branch" : [ { "SHA1" : "53c5327addf2f593bfa7af8a8bade8fe189f13c5", "name" : "master" } ] }, "revision" : { "SHA1" : "53c5327addf2f593bfa7af8a8bade8fe189f13c5", "branch" : [ { "SHA1" : "53c5327addf2f593bfa7af8a8bade8fe189f13c5", "name" : "master" } ] } } }, "lastBuiltRevision" : { "SHA1" : "53c5327addf2f593bfa7af8a8bade8fe189f13c5", "branch" : [ { "SHA1" : "53c5327addf2f593bfa7af8a8bade8fe189f13c5", "name" : "master" } ] }, "remoteUrls" : [ "http://159.27.226.4/weilikang/jenkinslib.git" ], "scmName" : "" }, { }, { }, { "_class" : "org.jenkinsci.plugins.workflow.cps.EnvActionImpl" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "refs/remotes/origin/master" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "b4b4bb20082b594ea1097f63bb6df1623357beba", "branch" : [ { "SHA1" : "b4b4bb20082b594ea1097f63bb6df1623357beba", "name" : "refs/remotes/origin/master" } ] }, "revision" : { "SHA1" : "b4b4bb20082b594ea1097f63bb6df1623357beba", "branch" : [ { "SHA1" : "b4b4bb20082b594ea1097f63bb6df1623357beba", "name" : "refs/remotes/origin/master" } ] } } }, "lastBuiltRevision" : { "SHA1" : "b4b4bb20082b594ea1097f63bb6df1623357beba", "branch" : [ { "SHA1" : "b4b4bb20082b594ea1097f63bb6df1623357beba", "name" : "refs/remotes/origin/master" } ] }, "remoteUrls" : [ "http://159.27.226.4/weilikang/jenkinsfiles.git" ], "scmName" : "" }, { }, { }, { }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev_d0713c" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 158, "buildResult" : None, "marked" : { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "branch" : [ { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "name" : "origin/rc_dev_d0713c" } ] }, "revision" : { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "branch" : [ { "SHA1" : "d0713c65fd86b2ac53ed036ec66b90521c2ef97c", "name" : "origin/rc_dev_d0713c" } ] } }, "origin/rc_dev_qingdaodagang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 320, "buildResult" : None, "marked" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_qingdaodagang" } ] }, "revision" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_qingdaodagang" } ] } }, "origin/rc_dev_youyiguan" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 378, "buildResult" : None, "marked" : { "SHA1" : "1be039cfa092298ec02479636537b6550f1b9152", "branch" : [ { "SHA1" : "1be039cfa092298ec02479636537b6550f1b9152", "name" : "origin/rc_dev_youyiguan" } ] }, "revision" : { "SHA1" : "1be039cfa092298ec02479636537b6550f1b9152", "branch" : [ { "SHA1" : "1be039cfa092298ec02479636537b6550f1b9152", "name" : "origin/rc_dev_youyiguan" } ] } }, "origin/rc_dev_xinjiang_kaiwo" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 310, "buildResult" : None, "marked" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_xinjiang_kaiwo" } ] }, "revision" : { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "branch" : [ { "SHA1" : "6858447f1f5c9e880a747d653217350f3c4ea0a0", "name" : "origin/rc_dev_xinjiang_kaiwo" } ] } }, "origin/rc_dev_xiamen" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 235, "buildResult" : None, "marked" : { "SHA1" : "8d5ec2119ebc027638fa1a22228e2a10cd856ec9", "branch" : [ { "SHA1" : "8d5ec2119ebc027638fa1a22228e2a10cd856ec9", "name" : "origin/rc_dev_xiamen" } ] }, "revision" : { "SHA1" : "8d5ec2119ebc027638fa1a22228e2a10cd856ec9", "branch" : [ { "SHA1" : "8d5ec2119ebc027638fa1a22228e2a10cd856ec9", "name" : "origin/rc_dev_xiamen" } ] } }, "origin/rc_dev_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 360, "buildResult" : None, "marked" : { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "branch" : [ { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "name" : "origin/rc_dev_xilian" } ] }, "revision" : { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "branch" : [ { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "name" : "origin/rc_dev_xilian" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 32, "buildResult" : None, "marked" : { "SHA1" : "932d6dbbd304eb1cd8f0e74f6a1b664fcea169bc", "branch" : [ { "SHA1" : "932d6dbbd304eb1cd8f0e74f6a1b664fcea169bc", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "932d6dbbd304eb1cd8f0e74f6a1b664fcea169bc", "branch" : [ { "SHA1" : "932d6dbbd304eb1cd8f0e74f6a1b664fcea169bc", "name" : "origin/dev" } ] } }, "origin/feat-peripheral_qiangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 125, "buildResult" : None, "marked" : { "SHA1" : "47370a9f329d90e5e5d59e53f6173a21ad880678", "branch" : [ { "SHA1" : "47370a9f329d90e5e5d59e53f6173a21ad880678", "name" : "origin/feat-peripheral_qiangang" } ] }, "revision" : { "SHA1" : "47370a9f329d90e5e5d59e53f6173a21ad880678", "branch" : [ { "SHA1" : "47370a9f329d90e5e5d59e53f6173a21ad880678", "name" : "origin/feat-peripheral_qiangang" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 419, "buildResult" : None, "marked" : { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "branch" : [ { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "branch" : [ { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "name" : "origin/rc_dev" } ] } }, "origin/rc_dev_qiangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 406, "buildResult" : None, "marked" : { "SHA1" : "f99f6780110f87131229f7cdfb946c9ce1bc428b", "branch" : [ { "SHA1" : "f99f6780110f87131229f7cdfb946c9ce1bc428b", "name" : "origin/rc_dev_qiangang" } ] }, "revision" : { "SHA1" : "f99f6780110f87131229f7cdfb946c9ce1bc428b", "branch" : [ { "SHA1" : "f99f6780110f87131229f7cdfb946c9ce1bc428b", "name" : "origin/rc_dev_qiangang" } ] } }, "origin/rc_dev_taiyang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 265, "buildResult" : None, "marked" : { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "branch" : [ { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "name" : "origin/rc_dev_taiyang" } ] }, "revision" : { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "branch" : [ { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "name" : "origin/rc_dev_taiyang" } ] } }, "origin/feat-peripheral_op_state" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 141, "buildResult" : None, "marked" : { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "branch" : [ { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "name" : "origin/feat-peripheral_op_state" } ] }, "revision" : { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "branch" : [ { "SHA1" : "f0a5167416f0fec86262fc7b9f86b98b8c9f1580", "name" : "origin/feat-peripheral_op_state" } ] } }, "origin/rc_dev_weihai" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 398, "buildResult" : None, "marked" : { "SHA1" : "bfa5c12ccddbcd6fdf0904c145f432753c98c6d8", "branch" : [ { "SHA1" : "bfa5c12ccddbcd6fdf0904c145f432753c98c6d8", "name" : "origin/rc_dev_weihai" } ] }, "revision" : { "SHA1" : "bfa5c12ccddbcd6fdf0904c145f432753c98c6d8", "branch" : [ { "SHA1" : "bfa5c12ccddbcd6fdf0904c145f432753c98c6d8", "name" : "origin/rc_dev_weihai" } ] } }, "origin/rc_dev_mandula" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 223, "buildResult" : None, "marked" : { "SHA1" : "b480a3026782e6090d1950c40614ca5f1b7e5d70", "branch" : [ { "SHA1" : "b480a3026782e6090d1950c40614ca5f1b7e5d70", "name" : "origin/rc_dev_mandula" } ] }, "revision" : { "SHA1" : "b480a3026782e6090d1950c40614ca5f1b7e5d70", "branch" : [ { "SHA1" : "b480a3026782e6090d1950c40614ca5f1b7e5d70", "name" : "origin/rc_dev_mandula" } ] } }, "origin/rc_dev_daxie" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 414, "buildResult" : None, "marked" : { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "branch" : [ { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "name" : "origin/rc_dev_daxie" } ] }, "revision" : { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "branch" : [ { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "name" : "origin/rc_dev_daxie" } ] } }, "origin/rc_dev_shanqihuanwei" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 363, "buildResult" : None, "marked" : { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "branch" : [ { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "name" : "origin/rc_dev_shanqihuanwei" } ] }, "revision" : { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "branch" : [ { "SHA1" : "f5a740650e27555efc2c844e135111515679ba9d", "name" : "origin/rc_dev_shanqihuanwei" } ] } }, "origin/rc_dev_zhoushan" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 351, "buildResult" : None, "marked" : { "SHA1" : "96ed1f1aae62978d865c3acf62e16756e9530773", "branch" : [ { "SHA1" : "96ed1f1aae62978d865c3acf62e16756e9530773", "name" : "origin/rc_dev_zhoushan" } ] }, "revision" : { "SHA1" : "96ed1f1aae62978d865c3acf62e16756e9530773", "branch" : [ { "SHA1" : "96ed1f1aae62978d865c3acf62e16756e9530773", "name" : "origin/rc_dev_zhoushan" } ] } }, "origin/rc_dev_jiningliangshangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "branch" : [ { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "name" : "origin/rc_dev_jiningliangshangang" } ] }, "revision" : { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "branch" : [ { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "name" : "origin/rc_dev_jiningliangshangang" } ] } }, "origin/rc_dev_shenqi" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 284, "buildResult" : None, "marked" : { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "branch" : [ { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "name" : "origin/rc_dev_shenqi" } ] }, "revision" : { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "branch" : [ { "SHA1" : "31f70a912caef9f3c2e3745c0e9b19467b7ca967", "name" : "origin/rc_dev_shenqi" } ] } }, "origin/dev_direction" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 22, "buildResult" : None, "marked" : { "SHA1" : "03f9d51b2cff980c32cfec344473b7fac146a4b2", "branch" : [ { "SHA1" : "03f9d51b2cff980c32cfec344473b7fac146a4b2", "name" : "origin/dev_direction" } ] }, "revision" : { "SHA1" : "03f9d51b2cff980c32cfec344473b7fac146a4b2", "branch" : [ { "SHA1" : "03f9d51b2cff980c32cfec344473b7fac146a4b2", "name" : "origin/dev_direction" } ] } }, "origin/feat_tc_v2_yangpu" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 399, "buildResult" : None, "marked" : { "SHA1" : "549daf0fc4e7c8f469ba1807acf334525ddb939b", "branch" : [ { "SHA1" : "549daf0fc4e7c8f469ba1807acf334525ddb939b", "name" : "origin/feat_tc_v2_yangpu" } ] }, "revision" : { "SHA1" : "549daf0fc4e7c8f469ba1807acf334525ddb939b", "branch" : [ { "SHA1" : "549daf0fc4e7c8f469ba1807acf334525ddb939b", "name" : "origin/feat_tc_v2_yangpu" } ] } }, "origin/rc_dev_yangpu" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 402, "buildResult" : None, "marked" : { "SHA1" : "549daf0fc4e7c8f469ba1807acf334525ddb939b", "branch" : [ { "SHA1" : "549daf0fc4e7c8f469ba1807acf334525ddb939b", "name" : "origin/rc_dev_yangpu" } ] }, "revision" : { "SHA1" : "549daf0fc4e7c8f469ba1807acf334525ddb939b", "branch" : [ { "SHA1" : "549daf0fc4e7c8f469ba1807acf334525ddb939b", "name" : "origin/rc_dev_yangpu" } ] } }, "origin/rcdev_c9969b7" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 107, "buildResult" : None, "marked" : { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "branch" : [ { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "name" : "origin/rcdev_c9969b7" } ] }, "revision" : { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "branch" : [ { "SHA1" : "c9969b7baa76f78e49bc051f035d8664a05e19f3", "name" : "origin/rcdev_c9969b7" } ] } }, "origin/rc_dev_b620c9" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 129, "buildResult" : None, "marked" : { "SHA1" : "b620c9e6a12a69dd6565be4549a34b1fb0071849", "branch" : [ { "SHA1" : "b620c9e6a12a69dd6565be4549a34b1fb0071849", "name" : "origin/rc_dev_b620c9" } ] }, "revision" : { "SHA1" : "b620c9e6a12a69dd6565be4549a34b1fb0071849", "branch" : [ { "SHA1" : "b620c9e6a12a69dd6565be4549a34b1fb0071849", "name" : "origin/rc_dev_b620c9" } ] } }, "origin/rc_dev_suxi" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 408, "buildResult" : None, "marked" : { "SHA1" : "b62bb5d564d92a444f2f111010fcd7f2e2918557", "branch" : [ { "SHA1" : "b62bb5d564d92a444f2f111010fcd7f2e2918557", "name" : "origin/rc_dev_suxi" } ] }, "revision" : { "SHA1" : "b62bb5d564d92a444f2f111010fcd7f2e2918557", "branch" : [ { "SHA1" : "b62bb5d564d92a444f2f111010fcd7f2e2918557", "name" : "origin/rc_dev_suxi" } ] } }, "origin/rc_dev_jiaxingdongfangtegang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 412, "buildResult" : None, "marked" : { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "branch" : [ { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "name" : "origin/rc_dev_jiaxingdongfangtegang" } ] }, "revision" : { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "branch" : [ { "SHA1" : "82bc5b4bd37c149910a332c9f5d49edbbed8d74d", "name" : "origin/rc_dev_jiaxingdongfangtegang" } ] } } }, "lastBuiltRevision" : { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "branch" : [ { "SHA1" : "d65a637033cc0e71b3569d97bb0c3a81fd357b96", "name" : "origin/rc_dev_jiningliangshangang" } ] }, "remoteUrls" : [ "http://159.27.226.4/shared/shared_msgs.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "branch" : [ { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "branch" : [ { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "branch" : [ { "SHA1" : "6de419bfe444eed8f2e1da930fb4a0e768499623", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar_localization_mapping/mrpt2.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "branch" : [ { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "branch" : [ { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "branch" : [ { "SHA1" : "dd159a843880991c2b6930e358e8c8c4b67b7b68", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/login-sync-tool.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "branch" : [ { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "branch" : [ { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "branch" : [ { "SHA1" : "508121cf208309009f02f90ca4e96cffe65739a8", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/driver_and_tools/static_transform.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "bf5af1bb51c01e4e834a3bc787a9baee2b0268de", "branch" : [ { "SHA1" : "bf5af1bb51c01e4e834a3bc787a9baee2b0268de", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "bf5af1bb51c01e4e834a3bc787a9baee2b0268de", "branch" : [ { "SHA1" : "bf5af1bb51c01e4e834a3bc787a9baee2b0268de", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "bf5af1bb51c01e4e834a3bc787a9baee2b0268de", "branch" : [ { "SHA1" : "bf5af1bb51c01e4e834a3bc787a9baee2b0268de", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/driver_and_tools/rslidar_sdk.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/test1" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 397, "buildResult" : None, "marked" : { "SHA1" : "5a2773c159fedc4ff668cd0cb1057b58cbdc089a", "branch" : [ { "SHA1" : "5a2773c159fedc4ff668cd0cb1057b58cbdc089a", "name" : "origin/test1" } ] }, "revision" : { "SHA1" : "5a2773c159fedc4ff668cd0cb1057b58cbdc089a", "branch" : [ { "SHA1" : "5a2773c159fedc4ff668cd0cb1057b58cbdc089a", "name" : "origin/test1" } ] } }, "origin/field-6-exam" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 377, "buildResult" : None, "marked" : { "SHA1" : "66ba217972d025702355ed82b96855d0e2630199", "branch" : [ { "SHA1" : "66ba217972d025702355ed82b96855d0e2630199", "name" : "origin/field-6-exam" } ] }, "revision" : { "SHA1" : "66ba217972d025702355ed82b96855d0e2630199", "branch" : [ { "SHA1" : "66ba217972d025702355ed82b96855d0e2630199", "name" : "origin/field-6-exam" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 414, "buildResult" : None, "marked" : { "SHA1" : "d30b6573081e1e1b79bea29359c4d95ecf6c98bc", "branch" : [ { "SHA1" : "d30b6573081e1e1b79bea29359c4d95ecf6c98bc", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "d30b6573081e1e1b79bea29359c4d95ecf6c98bc", "branch" : [ { "SHA1" : "d30b6573081e1e1b79bea29359c4d95ecf6c98bc", "name" : "origin/rc_dev" } ] } }, "origin/test_qingdao" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "54902aed969043b3f09a591299ad7aa14e4ed674", "branch" : [ { "SHA1" : "54902aed969043b3f09a591299ad7aa14e4ed674", "name" : "origin/test_qingdao" } ] }, "revision" : { "SHA1" : "54902aed969043b3f09a591299ad7aa14e4ed674", "branch" : [ { "SHA1" : "54902aed969043b3f09a591299ad7aa14e4ed674", "name" : "origin/test_qingdao" } ] } } }, "lastBuiltRevision" : { "SHA1" : "54902aed969043b3f09a591299ad7aa14e4ed674", "branch" : [ { "SHA1" : "54902aed969043b3f09a591299ad7aa14e4ed674", "name" : "origin/test_qingdao" } ] }, "remoteUrls" : [ "http://159.27.226.4/localization/msf_localization.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "branch" : [ { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "branch" : [ { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "branch" : [ { "SHA1" : "91b0e38b3ec33a5faf5313c8890f6c69815af438", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/localization/engineering/msf_assistant.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "c7e7b2c6f3d025b59d205b35e3ee2c45d078b6c2", "branch" : [ { "SHA1" : "c7e7b2c6f3d025b59d205b35e3ee2c45d078b6c2", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "c7e7b2c6f3d025b59d205b35e3ee2c45d078b6c2", "branch" : [ { "SHA1" : "c7e7b2c6f3d025b59d205b35e3ee2c45d078b6c2", "name" : "origin/rc_dev" } ] } }, "origin/rc_dev_qiangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 275, "buildResult" : None, "marked" : { "SHA1" : "ecad355c0bab745cf0e907ba2ed05d652ba573f6", "branch" : [ { "SHA1" : "ecad355c0bab745cf0e907ba2ed05d652ba573f6", "name" : "origin/rc_dev_qiangang" } ] }, "revision" : { "SHA1" : "ecad355c0bab745cf0e907ba2ed05d652ba573f6", "branch" : [ { "SHA1" : "ecad355c0bab745cf0e907ba2ed05d652ba573f6", "name" : "origin/rc_dev_qiangang" } ] } } }, "lastBuiltRevision" : { "SHA1" : "c7e7b2c6f3d025b59d205b35e3ee2c45d078b6c2", "branch" : [ { "SHA1" : "c7e7b2c6f3d025b59d205b35e3ee2c45d078b6c2", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/prediction.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev_yangpu" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 402, "buildResult" : None, "marked" : { "SHA1" : "a1b3bc6cd98119ee18e27da99582a75dd994d3cd", "branch" : [ { "SHA1" : "a1b3bc6cd98119ee18e27da99582a75dd994d3cd", "name" : "origin/rc_dev_yangpu" } ] }, "revision" : { "SHA1" : "a1b3bc6cd98119ee18e27da99582a75dd994d3cd", "branch" : [ { "SHA1" : "a1b3bc6cd98119ee18e27da99582a75dd994d3cd", "name" : "origin/rc_dev_yangpu" } ] } }, "origin/feat_tyzy" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 305, "buildResult" : None, "marked" : { "SHA1" : "e44cacec0b11231ddfe2c02e411774d91da9e83c", "branch" : [ { "SHA1" : "e44cacec0b11231ddfe2c02e411774d91da9e83c", "name" : "origin/feat_tyzy" } ] }, "revision" : { "SHA1" : "e44cacec0b11231ddfe2c02e411774d91da9e83c", "branch" : [ { "SHA1" : "e44cacec0b11231ddfe2c02e411774d91da9e83c", "name" : "origin/feat_tyzy" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 412, "buildResult" : None, "marked" : { "SHA1" : "834b1b1db064480bb0881ad1c69b0077365d5034", "branch" : [ { "SHA1" : "834b1b1db064480bb0881ad1c69b0077365d5034", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "834b1b1db064480bb0881ad1c69b0077365d5034", "branch" : [ { "SHA1" : "834b1b1db064480bb0881ad1c69b0077365d5034", "name" : "origin/rc_dev" } ] } }, "origin/rc_dev_dx_dgj" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 414, "buildResult" : None, "marked" : { "SHA1" : "0265cf967fd9d0d61df008ea330f6a7c4fcdd0ba", "branch" : [ { "SHA1" : "0265cf967fd9d0d61df008ea330f6a7c4fcdd0ba", "name" : "origin/rc_dev_dx_dgj" } ] }, "revision" : { "SHA1" : "0265cf967fd9d0d61df008ea330f6a7c4fcdd0ba", "branch" : [ { "SHA1" : "0265cf967fd9d0d61df008ea330f6a7c4fcdd0ba", "name" : "origin/rc_dev_dx_dgj" } ] } }, "origin/feat_jnlsg" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "6fe0f25f6d343d746b3168c70322b2c1330672a4", "branch" : [ { "SHA1" : "6fe0f25f6d343d746b3168c70322b2c1330672a4", "name" : "origin/feat_jnlsg" } ] }, "revision" : { "SHA1" : "6fe0f25f6d343d746b3168c70322b2c1330672a4", "branch" : [ { "SHA1" : "6fe0f25f6d343d746b3168c70322b2c1330672a4", "name" : "origin/feat_jnlsg" } ] } }, "origin/feat_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 358, "buildResult" : None, "marked" : { "SHA1" : "268ae344fc9e9d654b66d040ecceef5a48f08734", "branch" : [ { "SHA1" : "268ae344fc9e9d654b66d040ecceef5a48f08734", "name" : "origin/feat_xilian" } ] }, "revision" : { "SHA1" : "268ae344fc9e9d654b66d040ecceef5a48f08734", "branch" : [ { "SHA1" : "268ae344fc9e9d654b66d040ecceef5a48f08734", "name" : "origin/feat_xilian" } ] } }, "origin/feat_yyg" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 377, "buildResult" : None, "marked" : { "SHA1" : "a753b5306c4273a29705acb7a6a0a4b8f92cb038", "branch" : [ { "SHA1" : "a753b5306c4273a29705acb7a6a0a4b8f92cb038", "name" : "origin/feat_yyg" } ] }, "revision" : { "SHA1" : "a753b5306c4273a29705acb7a6a0a4b8f92cb038", "branch" : [ { "SHA1" : "a753b5306c4273a29705acb7a6a0a4b8f92cb038", "name" : "origin/feat_yyg" } ] } }, "origin/feat_qiangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 406, "buildResult" : None, "marked" : { "SHA1" : "b4e74ca76880c6d4649fe22fb14656b00d063198", "branch" : [ { "SHA1" : "b4e74ca76880c6d4649fe22fb14656b00d063198", "name" : "origin/feat_qiangang" } ] }, "revision" : { "SHA1" : "b4e74ca76880c6d4649fe22fb14656b00d063198", "branch" : [ { "SHA1" : "b4e74ca76880c6d4649fe22fb14656b00d063198", "name" : "origin/feat_qiangang" } ] } }, "origin/rc_dev_daxie" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 353, "buildResult" : None, "marked" : { "SHA1" : "c157dadbb1179a54f6437a3367babc6a0a7749ef", "branch" : [ { "SHA1" : "c157dadbb1179a54f6437a3367babc6a0a7749ef", "name" : "origin/rc_dev_daxie" } ] }, "revision" : { "SHA1" : "c157dadbb1179a54f6437a3367babc6a0a7749ef", "branch" : [ { "SHA1" : "c157dadbb1179a54f6437a3367babc6a0a7749ef", "name" : "origin/rc_dev_daxie" } ] } } }, "lastBuiltRevision" : { "SHA1" : "6fe0f25f6d343d746b3168c70322b2c1330672a4", "branch" : [ { "SHA1" : "6fe0f25f6d343d746b3168c70322b2c1330672a4", "name" : "origin/feat_jnlsg" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/peripheral_controller.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "cea8686d9fa9ec6e52d29f4da666aaa55ccee34f", "branch" : [ { "SHA1" : "cea8686d9fa9ec6e52d29f4da666aaa55ccee34f", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "cea8686d9fa9ec6e52d29f4da666aaa55ccee34f", "branch" : [ { "SHA1" : "cea8686d9fa9ec6e52d29f4da666aaa55ccee34f", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "cea8686d9fa9ec6e52d29f4da666aaa55ccee34f", "branch" : [ { "SHA1" : "cea8686d9fa9ec6e52d29f4da666aaa55ccee34f", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/data_collection.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/feat_seg_search" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 261, "buildResult" : None, "marked" : { "SHA1" : "892a684773d2133449ccd0109e4f649367316b72", "branch" : [ { "SHA1" : "892a684773d2133449ccd0109e4f649367316b72", "name" : "origin/feat_seg_search" } ] }, "revision" : { "SHA1" : "892a684773d2133449ccd0109e4f649367316b72", "branch" : [ { "SHA1" : "892a684773d2133449ccd0109e4f649367316b72", "name" : "origin/feat_seg_search" } ] } }, "origin/test_pedestrian_alarm" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 418, "buildResult" : None, "marked" : { "SHA1" : "795cfa4682c6ffc7a4600a52022b5c5653459a9c", "branch" : [ { "SHA1" : "795cfa4682c6ffc7a4600a52022b5c5653459a9c", "name" : "origin/test_pedestrian_alarm" } ] }, "revision" : { "SHA1" : "795cfa4682c6ffc7a4600a52022b5c5653459a9c", "branch" : [ { "SHA1" : "795cfa4682c6ffc7a4600a52022b5c5653459a9c", "name" : "origin/test_pedestrian_alarm" } ] } }, "origin/feat_lattice_ref_speed" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 377, "buildResult" : None, "marked" : { "SHA1" : "5eb04acbf26c894cd1d10199b5140392b43a32a2", "branch" : [ { "SHA1" : "5eb04acbf26c894cd1d10199b5140392b43a32a2", "name" : "origin/feat_lattice_ref_speed" } ] }, "revision" : { "SHA1" : "5eb04acbf26c894cd1d10199b5140392b43a32a2", "branch" : [ { "SHA1" : "5eb04acbf26c894cd1d10199b5140392b43a32a2", "name" : "origin/feat_lattice_ref_speed" } ] } }, "origin/feat-ssep-add-hd-map" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 327, "buildResult" : None, "marked" : { "SHA1" : "2da5f730d2960435e5ca9668bd9adaafeb8c0107", "branch" : [ { "SHA1" : "2da5f730d2960435e5ca9668bd9adaafeb8c0107", "name" : "origin/feat-ssep-add-hd-map" } ] }, "revision" : { "SHA1" : "2da5f730d2960435e5ca9668bd9adaafeb8c0107", "branch" : [ { "SHA1" : "2da5f730d2960435e5ca9668bd9adaafeb8c0107", "name" : "origin/feat-ssep-add-hd-map" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 409, "buildResult" : None, "marked" : { "SHA1" : "1f83b21901518f710c4d73ce9d08d6571ce026d0", "branch" : [ { "SHA1" : "1f83b21901518f710c4d73ce9d08d6571ce026d0", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "1f83b21901518f710c4d73ce9d08d6571ce026d0", "branch" : [ { "SHA1" : "1f83b21901518f710c4d73ce9d08d6571ce026d0", "name" : "origin/rc_dev" } ] } }, "origin/feat_park" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 288, "buildResult" : None, "marked" : { "SHA1" : "eb9b0b9376be930fe48d85d4cad38ecb2561b023", "branch" : [ { "SHA1" : "eb9b0b9376be930fe48d85d4cad38ecb2561b023", "name" : "origin/feat_park" } ] }, "revision" : { "SHA1" : "eb9b0b9376be930fe48d85d4cad38ecb2561b023", "branch" : [ { "SHA1" : "eb9b0b9376be930fe48d85d4cad38ecb2561b023", "name" : "origin/feat_park" } ] } }, "origin/feat_yp_LD" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 319, "buildResult" : None, "marked" : { "SHA1" : "d204503fbecff5e3e64c20f69be322ce29af7ec6", "branch" : [ { "SHA1" : "d204503fbecff5e3e64c20f69be322ce29af7ec6", "name" : "origin/feat_yp_LD" } ] }, "revision" : { "SHA1" : "d204503fbecff5e3e64c20f69be322ce29af7ec6", "branch" : [ { "SHA1" : "d204503fbecff5e3e64c20f69be322ce29af7ec6", "name" : "origin/feat_yp_LD" } ] } }, "origin/feat_qiangang" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 385, "buildResult" : None, "marked" : { "SHA1" : "0198be79704a47a8a105d4f73816753ec663224c", "branch" : [ { "SHA1" : "0198be79704a47a8a105d4f73816753ec663224c", "name" : "origin/feat_qiangang" } ] }, "revision" : { "SHA1" : "0198be79704a47a8a105d4f73816753ec663224c", "branch" : [ { "SHA1" : "0198be79704a47a8a105d4f73816753ec663224c", "name" : "origin/feat_qiangang" } ] } }, "origin/feat_sqjb" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 283, "buildResult" : None, "marked" : { "SHA1" : "c57afdd0a74c218c601af64ace8e137ca0b43b6a", "branch" : [ { "SHA1" : "c57afdd0a74c218c601af64ace8e137ca0b43b6a", "name" : "origin/feat_sqjb" } ] }, "revision" : { "SHA1" : "c57afdd0a74c218c601af64ace8e137ca0b43b6a", "branch" : [ { "SHA1" : "c57afdd0a74c218c601af64ace8e137ca0b43b6a", "name" : "origin/feat_sqjb" } ] } }, "origin/feat_remote" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 305, "buildResult" : None, "marked" : { "SHA1" : "a602a3e2f006c427c5dc30050a6a12b573e3f14e", "branch" : [ { "SHA1" : "a602a3e2f006c427c5dc30050a6a12b573e3f14e", "name" : "origin/feat_remote" } ] }, "revision" : { "SHA1" : "a602a3e2f006c427c5dc30050a6a12b573e3f14e", "branch" : [ { "SHA1" : "a602a3e2f006c427c5dc30050a6a12b573e3f14e", "name" : "origin/feat_remote" } ] } }, "origin/feat_daxie" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 333, "buildResult" : None, "marked" : { "SHA1" : "d27cb08d4108e62f0b1774c5ee3ad94dd27d48f0", "branch" : [ { "SHA1" : "d27cb08d4108e62f0b1774c5ee3ad94dd27d48f0", "name" : "origin/feat_daxie" } ] }, "revision" : { "SHA1" : "d27cb08d4108e62f0b1774c5ee3ad94dd27d48f0", "branch" : [ { "SHA1" : "d27cb08d4108e62f0b1774c5ee3ad94dd27d48f0", "name" : "origin/feat_daxie" } ] } }, "origin/feat_error" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 392, "buildResult" : None, "marked" : { "SHA1" : "5546850e5454a0aaa7030678933b132c61a2ec84", "branch" : [ { "SHA1" : "5546850e5454a0aaa7030678933b132c61a2ec84", "name" : "origin/feat_error" } ] }, "revision" : { "SHA1" : "5546850e5454a0aaa7030678933b132c61a2ec84", "branch" : [ { "SHA1" : "5546850e5454a0aaa7030678933b132c61a2ec84", "name" : "origin/feat_error" } ] } }, "origin/feat_yangpu1" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 394, "buildResult" : None, "marked" : { "SHA1" : "f681eb8a15aaa2e1619d4f531bfe86654aedf63c", "branch" : [ { "SHA1" : "f681eb8a15aaa2e1619d4f531bfe86654aedf63c", "name" : "origin/feat_yangpu1" } ] }, "revision" : { "SHA1" : "f681eb8a15aaa2e1619d4f531bfe86654aedf63c", "branch" : [ { "SHA1" : "f681eb8a15aaa2e1619d4f531bfe86654aedf63c", "name" : "origin/feat_yangpu1" } ] } }, "origin/feat_yangpu" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 372, "buildResult" : None, "marked" : { "SHA1" : "d7b38ac92fd4feea0f081ba7b8d1bdf9ef6d74c4", "branch" : [ { "SHA1" : "d7b38ac92fd4feea0f081ba7b8d1bdf9ef6d74c4", "name" : "origin/feat_yangpu" } ] }, "revision" : { "SHA1" : "d7b38ac92fd4feea0f081ba7b8d1bdf9ef6d74c4", "branch" : [ { "SHA1" : "d7b38ac92fd4feea0f081ba7b8d1bdf9ef6d74c4", "name" : "origin/feat_yangpu" } ] } }, "origin/feat_wh" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 364, "buildResult" : None, "marked" : { "SHA1" : "ac64e4f9fe3a1f796849d718cfa5dcb3b58567a9", "branch" : [ { "SHA1" : "ac64e4f9fe3a1f796849d718cfa5dcb3b58567a9", "name" : "origin/feat_wh" } ] }, "revision" : { "SHA1" : "ac64e4f9fe3a1f796849d718cfa5dcb3b58567a9", "branch" : [ { "SHA1" : "ac64e4f9fe3a1f796849d718cfa5dcb3b58567a9", "name" : "origin/feat_wh" } ] } }, "origin/feat_qiangang_refactor" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 329, "buildResult" : None, "marked" : { "SHA1" : "cc359d469af660bf0848258035f9d15deb0460fd", "branch" : [ { "SHA1" : "cc359d469af660bf0848258035f9d15deb0460fd", "name" : "origin/feat_qiangang_refactor" } ] }, "revision" : { "SHA1" : "cc359d469af660bf0848258035f9d15deb0460fd", "branch" : [ { "SHA1" : "cc359d469af660bf0848258035f9d15deb0460fd", "name" : "origin/feat_qiangang_refactor" } ] } }, "origin/feat_sq_LD_test" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 355, "buildResult" : None, "marked" : { "SHA1" : "3a1fe1f672a62876f54c8043013ad206812007ec", "branch" : [ { "SHA1" : "3a1fe1f672a62876f54c8043013ad206812007ec", "name" : "origin/feat_sq_LD_test" } ] }, "revision" : { "SHA1" : "3a1fe1f672a62876f54c8043013ad206812007ec", "branch" : [ { "SHA1" : "3a1fe1f672a62876f54c8043013ad206812007ec", "name" : "origin/feat_sq_LD_test" } ] } }, "origin/feat_qianggang_refactor_base" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 391, "buildResult" : None, "marked" : { "SHA1" : "77abbad3d5dc0a0cc78b878295e91bf56f4af513", "branch" : [ { "SHA1" : "77abbad3d5dc0a0cc78b878295e91bf56f4af513", "name" : "origin/feat_qianggang_refactor_base" } ] }, "revision" : { "SHA1" : "77abbad3d5dc0a0cc78b878295e91bf56f4af513", "branch" : [ { "SHA1" : "77abbad3d5dc0a0cc78b878295e91bf56f4af513", "name" : "origin/feat_qianggang_refactor_base" } ] } }, "origin/feat_trajectory" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "15f59cf516b4828241ba12039ef21f8630e7f54e", "branch" : [ { "SHA1" : "15f59cf516b4828241ba12039ef21f8630e7f54e", "name" : "origin/feat_trajectory" } ] }, "revision" : { "SHA1" : "15f59cf516b4828241ba12039ef21f8630e7f54e", "branch" : [ { "SHA1" : "15f59cf516b4828241ba12039ef21f8630e7f54e", "name" : "origin/feat_trajectory" } ] } }, "origin/feat_lock_station" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 256, "buildResult" : None, "marked" : { "SHA1" : "4ed3c79cfa0ecb052ab832ff510aed835aa64c0f", "branch" : [ { "SHA1" : "4ed3c79cfa0ecb052ab832ff510aed835aa64c0f", "name" : "origin/feat_lock_station" } ] }, "revision" : { "SHA1" : "4ed3c79cfa0ecb052ab832ff510aed835aa64c0f", "branch" : [ { "SHA1" : "4ed3c79cfa0ecb052ab832ff510aed835aa64c0f", "name" : "origin/feat_lock_station" } ] } }, "origin/feat_escape" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 315, "buildResult" : None, "marked" : { "SHA1" : "07da24972be561730ba0607d76f6a479db4b96a9", "branch" : [ { "SHA1" : "07da24972be561730ba0607d76f6a479db4b96a9", "name" : "origin/feat_escape" } ] }, "revision" : { "SHA1" : "07da24972be561730ba0607d76f6a479db4b96a9", "branch" : [ { "SHA1" : "07da24972be561730ba0607d76f6a479db4b96a9", "name" : "origin/feat_escape" } ] } }, "origin/feat_wh_trailer" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 397, "buildResult" : None, "marked" : { "SHA1" : "f7fd1e3a50183051c8d0f349ab6a1277aaf7c5db", "branch" : [ { "SHA1" : "f7fd1e3a50183051c8d0f349ab6a1277aaf7c5db", "name" : "origin/feat_wh_trailer" } ] }, "revision" : { "SHA1" : "f7fd1e3a50183051c8d0f349ab6a1277aaf7c5db", "branch" : [ { "SHA1" : "f7fd1e3a50183051c8d0f349ab6a1277aaf7c5db", "name" : "origin/feat_wh_trailer" } ] } }, "origin/feat_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 292, "buildResult" : None, "marked" : { "SHA1" : "b7bddf1e4a02578d76a1aedd8cddde193887e4ea", "branch" : [ { "SHA1" : "b7bddf1e4a02578d76a1aedd8cddde193887e4ea", "name" : "origin/feat_xilian" } ] }, "revision" : { "SHA1" : "b7bddf1e4a02578d76a1aedd8cddde193887e4ea", "branch" : [ { "SHA1" : "b7bddf1e4a02578d76a1aedd8cddde193887e4ea", "name" : "origin/feat_xilian" } ] } }, "origin/feat_pnc_status" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 368, "buildResult" : None, "marked" : { "SHA1" : "a106c054091a39f8e38cabb78e45cec62f98e14d", "branch" : [ { "SHA1" : "a106c054091a39f8e38cabb78e45cec62f98e14d", "name" : "origin/feat_pnc_status" } ] }, "revision" : { "SHA1" : "a106c054091a39f8e38cabb78e45cec62f98e14d", "branch" : [ { "SHA1" : "a106c054091a39f8e38cabb78e45cec62f98e14d", "name" : "origin/feat_pnc_status" } ] } }, "origin/feat_remote_open_space" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 309, "buildResult" : None, "marked" : { "SHA1" : "890fc6e47593fa42eabdbfd10df1090d3e21670d", "branch" : [ { "SHA1" : "890fc6e47593fa42eabdbfd10df1090d3e21670d", "name" : "origin/feat_remote_open_space" } ] }, "revision" : { "SHA1" : "890fc6e47593fa42eabdbfd10df1090d3e21670d", "branch" : [ { "SHA1" : "890fc6e47593fa42eabdbfd10df1090d3e21670d", "name" : "origin/feat_remote_open_space" } ] } } }, "lastBuiltRevision" : { "SHA1" : "15f59cf516b4828241ba12039ef21f8630e7f54e", "branch" : [ { "SHA1" : "15f59cf516b4828241ba12039ef21f8630e7f54e", "name" : "origin/feat_trajectory" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/pnc.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 409, "buildResult" : None, "marked" : { "SHA1" : "f33f5576813b1a5ff236046f8f5d8df235bd2f21", "branch" : [ { "SHA1" : "f33f5576813b1a5ff236046f8f5d8df235bd2f21", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "f33f5576813b1a5ff236046f8f5d8df235bd2f21", "branch" : [ { "SHA1" : "f33f5576813b1a5ff236046f8f5d8df235bd2f21", "name" : "origin/rc_dev" } ] } }, "origin/feat_below_plane" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 261, "buildResult" : None, "marked" : { "SHA1" : "265bc4b5032be394124c2daddd870b2a4218d12e", "branch" : [ { "SHA1" : "265bc4b5032be394124c2daddd870b2a4218d12e", "name" : "origin/feat_below_plane" } ] }, "revision" : { "SHA1" : "265bc4b5032be394124c2daddd870b2a4218d12e", "branch" : [ { "SHA1" : "265bc4b5032be394124c2daddd870b2a4218d12e", "name" : "origin/feat_below_plane" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 285, "buildResult" : None, "marked" : { "SHA1" : "d558623ed9de2b6e1350f381514b2cf0719a403f", "branch" : [ { "SHA1" : "d558623ed9de2b6e1350f381514b2cf0719a403f", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "d558623ed9de2b6e1350f381514b2cf0719a403f", "branch" : [ { "SHA1" : "d558623ed9de2b6e1350f381514b2cf0719a403f", "name" : "origin/dev" } ] } }, "origin/feat_cargo_width" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 392, "buildResult" : None, "marked" : { "SHA1" : "a7c8aed0fadafd194d45e5ec5fa9a16d1c09636b", "branch" : [ { "SHA1" : "a7c8aed0fadafd194d45e5ec5fa9a16d1c09636b", "name" : "origin/feat_cargo_width" } ] }, "revision" : { "SHA1" : "a7c8aed0fadafd194d45e5ec5fa9a16d1c09636b", "branch" : [ { "SHA1" : "a7c8aed0fadafd194d45e5ec5fa9a16d1c09636b", "name" : "origin/feat_cargo_width" } ] } }, "origin/feat_pnc_status" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 368, "buildResult" : None, "marked" : { "SHA1" : "cc38bf4d96904fc564e69108c9b8d5f48c6cbd7d", "branch" : [ { "SHA1" : "cc38bf4d96904fc564e69108c9b8d5f48c6cbd7d", "name" : "origin/feat_pnc_status" } ] }, "revision" : { "SHA1" : "cc38bf4d96904fc564e69108c9b8d5f48c6cbd7d", "branch" : [ { "SHA1" : "cc38bf4d96904fc564e69108c9b8d5f48c6cbd7d", "name" : "origin/feat_pnc_status" } ] } }, "origin/feat_yangpu" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "8c49b0f3476554392dd7a5e1c398887693943bdf", "branch" : [ { "SHA1" : "8c49b0f3476554392dd7a5e1c398887693943bdf", "name" : "origin/feat_yangpu" } ] }, "revision" : { "SHA1" : "8c49b0f3476554392dd7a5e1c398887693943bdf", "branch" : [ { "SHA1" : "8c49b0f3476554392dd7a5e1c398887693943bdf", "name" : "origin/feat_yangpu" } ] } } }, "lastBuiltRevision" : { "SHA1" : "8c49b0f3476554392dd7a5e1c398887693943bdf", "branch" : [ { "SHA1" : "8c49b0f3476554392dd7a5e1c398887693943bdf", "name" : "origin/feat_yangpu" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/guardian.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "branch" : [ { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "branch" : [ { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "branch" : [ { "SHA1" : "99b378b8006831f0b25b40e7e02dfce29e17af79", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/tos_visualize.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev_perceptive" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 407, "buildResult" : None, "marked" : { "SHA1" : "4ccbac0a2f06269fb2498350334c788ca113b753", "branch" : [ { "SHA1" : "4ccbac0a2f06269fb2498350334c788ca113b753", "name" : "origin/rc_dev_perceptive" } ] }, "revision" : { "SHA1" : "4ccbac0a2f06269fb2498350334c788ca113b753", "branch" : [ { "SHA1" : "4ccbac0a2f06269fb2498350334c788ca113b753", "name" : "origin/rc_dev_perceptive" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "branch" : [ { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "branch" : [ { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "name" : "origin/rc_dev" } ] } }, "origin/rc_dev_kaiwo" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 310, "buildResult" : None, "marked" : { "SHA1" : "6bd09b52dbe9f6e8781794625d4962dbd2a4aeb0", "branch" : [ { "SHA1" : "6bd09b52dbe9f6e8781794625d4962dbd2a4aeb0", "name" : "origin/rc_dev_kaiwo" } ] }, "revision" : { "SHA1" : "6bd09b52dbe9f6e8781794625d4962dbd2a4aeb0", "branch" : [ { "SHA1" : "6bd09b52dbe9f6e8781794625d4962dbd2a4aeb0", "name" : "origin/rc_dev_kaiwo" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 414, "buildResult" : None, "marked" : { "SHA1" : "b5d2f8674cee5cabcd3c2e4349999b4b656bed8f", "branch" : [ { "SHA1" : "b5d2f8674cee5cabcd3c2e4349999b4b656bed8f", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "b5d2f8674cee5cabcd3c2e4349999b4b656bed8f", "branch" : [ { "SHA1" : "b5d2f8674cee5cabcd3c2e4349999b4b656bed8f", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "branch" : [ { "SHA1" : "8b8cb456d61816c40a20eeb915f89843af304a5a", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/camera_driver.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "branch" : [ { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "branch" : [ { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "branch" : [ { "SHA1" : "970b2c8b835746d0e956627808e627f2be39dff9", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/localization/engineering/sins_calibration_hmi.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "branch" : [ { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "branch" : [ { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "branch" : [ { "SHA1" : "1f369887ce907f52c7bd0640f498d5741b3b211f", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/localization/test/tools.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "8a48972ce17db52d38a5c52d3dc616802dcee407", "branch" : [ { "SHA1" : "8a48972ce17db52d38a5c52d3dc616802dcee407", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "8a48972ce17db52d38a5c52d3dc616802dcee407", "branch" : [ { "SHA1" : "8a48972ce17db52d38a5c52d3dc616802dcee407", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "8a48972ce17db52d38a5c52d3dc616802dcee407", "branch" : [ { "SHA1" : "8a48972ce17db52d38a5c52d3dc616802dcee407", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/system-ros.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/feat_creep_without_status" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 392, "buildResult" : None, "marked" : { "SHA1" : "724e77255aa51bfbe9a337d7459a929b43cd661b", "branch" : [ { "SHA1" : "724e77255aa51bfbe9a337d7459a929b43cd661b", "name" : "origin/feat_creep_without_status" } ] }, "revision" : { "SHA1" : "724e77255aa51bfbe9a337d7459a929b43cd661b", "branch" : [ { "SHA1" : "724e77255aa51bfbe9a337d7459a929b43cd661b", "name" : "origin/feat_creep_without_status" } ] } }, "origin/feat_parallel" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 275, "buildResult" : None, "marked" : { "SHA1" : "fb1ccc005c3ee46fe267bfc3fe48cb2680db8883", "branch" : [ { "SHA1" : "fb1ccc005c3ee46fe267bfc3fe48cb2680db8883", "name" : "origin/feat_parallel" } ] }, "revision" : { "SHA1" : "fb1ccc005c3ee46fe267bfc3fe48cb2680db8883", "branch" : [ { "SHA1" : "fb1ccc005c3ee46fe267bfc3fe48cb2680db8883", "name" : "origin/feat_parallel" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 409, "buildResult" : None, "marked" : { "SHA1" : "bf96652e6ddeb92d404e67071c28025e66cd64fe", "branch" : [ { "SHA1" : "bf96652e6ddeb92d404e67071c28025e66cd64fe", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "bf96652e6ddeb92d404e67071c28025e66cd64fe", "branch" : [ { "SHA1" : "bf96652e6ddeb92d404e67071c28025e66cd64fe", "name" : "origin/rc_dev" } ] } }, "origin/feat_pnc_status_a2p" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 390, "buildResult" : None, "marked" : { "SHA1" : "dc78090a1c352d3743427ca682cb2d6055be15b5", "branch" : [ { "SHA1" : "dc78090a1c352d3743427ca682cb2d6055be15b5", "name" : "origin/feat_pnc_status_a2p" } ] }, "revision" : { "SHA1" : "dc78090a1c352d3743427ca682cb2d6055be15b5", "branch" : [ { "SHA1" : "dc78090a1c352d3743427ca682cb2d6055be15b5", "name" : "origin/feat_pnc_status_a2p" } ] } }, "origin/feat_lmpc_pnc_status" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 366, "buildResult" : None, "marked" : { "SHA1" : "ef5fb6edcee78a733be5f87e585b479caff5b3ca", "branch" : [ { "SHA1" : "ef5fb6edcee78a733be5f87e585b479caff5b3ca", "name" : "origin/feat_lmpc_pnc_status" } ] }, "revision" : { "SHA1" : "ef5fb6edcee78a733be5f87e585b479caff5b3ca", "branch" : [ { "SHA1" : "ef5fb6edcee78a733be5f87e585b479caff5b3ca", "name" : "origin/feat_lmpc_pnc_status" } ] } }, "origin/fix_mass_esstimate" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 321, "buildResult" : None, "marked" : { "SHA1" : "c741ab97e651163a949200862f63fc21d032afd1", "branch" : [ { "SHA1" : "c741ab97e651163a949200862f63fc21d032afd1", "name" : "origin/fix_mass_esstimate" } ] }, "revision" : { "SHA1" : "c741ab97e651163a949200862f63fc21d032afd1", "branch" : [ { "SHA1" : "c741ab97e651163a949200862f63fc21d032afd1", "name" : "origin/fix_mass_esstimate" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 256, "buildResult" : None, "marked" : { "SHA1" : "5d89cd8bb1cc16820728ec5401861798da08f8ab", "branch" : [ { "SHA1" : "5d89cd8bb1cc16820728ec5401861798da08f8ab", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "5d89cd8bb1cc16820728ec5401861798da08f8ab", "branch" : [ { "SHA1" : "5d89cd8bb1cc16820728ec5401861798da08f8ab", "name" : "origin/dev" } ] } }, "origin/feat_cargo_width_remote" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 391, "buildResult" : None, "marked" : { "SHA1" : "715acf05d21b6221e37f946500215ce57e1a0fb1", "branch" : [ { "SHA1" : "715acf05d21b6221e37f946500215ce57e1a0fb1", "name" : "origin/feat_cargo_width_remote" } ] }, "revision" : { "SHA1" : "715acf05d21b6221e37f946500215ce57e1a0fb1", "branch" : [ { "SHA1" : "715acf05d21b6221e37f946500215ce57e1a0fb1", "name" : "origin/feat_cargo_width_remote" } ] } }, "origin/feat_pnc_status" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 385, "buildResult" : None, "marked" : { "SHA1" : "85eaef2f82a49fa864bf463dd644c1cab60093ba", "branch" : [ { "SHA1" : "85eaef2f82a49fa864bf463dd644c1cab60093ba", "name" : "origin/feat_pnc_status" } ] }, "revision" : { "SHA1" : "85eaef2f82a49fa864bf463dd644c1cab60093ba", "branch" : [ { "SHA1" : "85eaef2f82a49fa864bf463dd644c1cab60093ba", "name" : "origin/feat_pnc_status" } ] } }, "origin/feat_creep_status" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "f794cd9d1706cdb27c2446a304d48032c1d8bc32", "branch" : [ { "SHA1" : "f794cd9d1706cdb27c2446a304d48032c1d8bc32", "name" : "origin/feat_creep_status" } ] }, "revision" : { "SHA1" : "f794cd9d1706cdb27c2446a304d48032c1d8bc32", "branch" : [ { "SHA1" : "f794cd9d1706cdb27c2446a304d48032c1d8bc32", "name" : "origin/feat_creep_status" } ] } }, "origin/feat_cargo_width_1_steering_offset" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 327, "buildResult" : None, "marked" : { "SHA1" : "19a8f0893012851595f722b221118a4eda904c8f", "branch" : [ { "SHA1" : "19a8f0893012851595f722b221118a4eda904c8f", "name" : "origin/feat_cargo_width_1_steering_offset" } ] }, "revision" : { "SHA1" : "19a8f0893012851595f722b221118a4eda904c8f", "branch" : [ { "SHA1" : "19a8f0893012851595f722b221118a4eda904c8f", "name" : "origin/feat_cargo_width_1_steering_offset" } ] } } }, "lastBuiltRevision" : { "SHA1" : "f794cd9d1706cdb27c2446a304d48032c1d8bc32", "branch" : [ { "SHA1" : "f794cd9d1706cdb27c2446a304d48032c1d8bc32", "name" : "origin/feat_creep_status" } ] }, "remoteUrls" : [ "http://159.27.226.4/pnc/control.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "c442cfc092a2453537e5c4cb3330789906ebf24a", "branch" : [ { "SHA1" : "c442cfc092a2453537e5c4cb3330789906ebf24a", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "c442cfc092a2453537e5c4cb3330789906ebf24a", "branch" : [ { "SHA1" : "c442cfc092a2453537e5c4cb3330789906ebf24a", "name" : "origin/rc_dev" } ] } }, "origin/feat_yyg" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 377, "buildResult" : None, "marked" : { "SHA1" : "6456742954c3bc2fbdff6209725a7ecf925fcf7a", "branch" : [ { "SHA1" : "6456742954c3bc2fbdff6209725a7ecf925fcf7a", "name" : "origin/feat_yyg" } ] }, "revision" : { "SHA1" : "6456742954c3bc2fbdff6209725a7ecf925fcf7a", "branch" : [ { "SHA1" : "6456742954c3bc2fbdff6209725a7ecf925fcf7a", "name" : "origin/feat_yyg" } ] } } }, "lastBuiltRevision" : { "SHA1" : "c442cfc092a2453537e5c4cb3330789906ebf24a", "branch" : [ { "SHA1" : "c442cfc092a2453537e5c4cb3330789906ebf24a", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/rminterpreter.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "6c5c3a18ee3c59b249a3153944b221db77ca6219", "branch" : [ { "SHA1" : "6c5c3a18ee3c59b249a3153944b221db77ca6219", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "6c5c3a18ee3c59b249a3153944b221db77ca6219", "branch" : [ { "SHA1" : "6c5c3a18ee3c59b249a3153944b221db77ca6219", "name" : "origin/rc_dev" } ] } }, "origin/dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 414, "buildResult" : None, "marked" : { "SHA1" : "fce10de18d6bc75fd5f820bcc9f9713993f91006", "branch" : [ { "SHA1" : "fce10de18d6bc75fd5f820bcc9f9713993f91006", "name" : "origin/dev" } ] }, "revision" : { "SHA1" : "fce10de18d6bc75fd5f820bcc9f9713993f91006", "branch" : [ { "SHA1" : "fce10de18d6bc75fd5f820bcc9f9713993f91006", "name" : "origin/dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "6c5c3a18ee3c59b249a3153944b221db77ca6219", "branch" : [ { "SHA1" : "6c5c3a18ee3c59b249a3153944b221db77ca6219", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/map/hdmap_cloud.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "2d4ced6cb3bf16913d47bf8fa287570d8b0a5e39", "branch" : [ { "SHA1" : "2d4ced6cb3bf16913d47bf8fa287570d8b0a5e39", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "2d4ced6cb3bf16913d47bf8fa287570d8b0a5e39", "branch" : [ { "SHA1" : "2d4ced6cb3bf16913d47bf8fa287570d8b0a5e39", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "2d4ced6cb3bf16913d47bf8fa287570d8b0a5e39", "branch" : [ { "SHA1" : "2d4ced6cb3bf16913d47bf8fa287570d8b0a5e39", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/node-manager.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/xavier" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 239, "buildResult" : None, "marked" : { "SHA1" : "a3af8f7bde5f7b28425511f1eb6724e59ff6891f", "branch" : [ { "SHA1" : "a3af8f7bde5f7b28425511f1eb6724e59ff6891f", "name" : "origin/xavier" } ] }, "revision" : { "SHA1" : "a3af8f7bde5f7b28425511f1eb6724e59ff6891f", "branch" : [ { "SHA1" : "a3af8f7bde5f7b28425511f1eb6724e59ff6891f", "name" : "origin/xavier" } ] } }, "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "26906400d8641ad3fe03f32af57bf855c1078876", "branch" : [ { "SHA1" : "26906400d8641ad3fe03f32af57bf855c1078876", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "26906400d8641ad3fe03f32af57bf855c1078876", "branch" : [ { "SHA1" : "26906400d8641ad3fe03f32af57bf855c1078876", "name" : "origin/rc_dev" } ] } }, "origin/new_dds" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 91, "buildResult" : None, "marked" : { "SHA1" : "83bf2fe32f486041bc7732149d25665ebb5b1392", "branch" : [ { "SHA1" : "83bf2fe32f486041bc7732149d25665ebb5b1392", "name" : "origin/new_dds" } ] }, "revision" : { "SHA1" : "83bf2fe32f486041bc7732149d25665ebb5b1392", "branch" : [ { "SHA1" : "83bf2fe32f486041bc7732149d25665ebb5b1392", "name" : "origin/new_dds" } ] } } }, "lastBuiltRevision" : { "SHA1" : "26906400d8641ad3fe03f32af57bf855c1078876", "branch" : [ { "SHA1" : "26906400d8641ad3fe03f32af57bf855c1078876", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/thirdparty.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "branch" : [ { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "branch" : [ { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "branch" : [ { "SHA1" : "cffded3717ff7c8d38d384448caf7a860444c31d", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/node-manager-hmi.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "31985b9f6c1fd6fbbc94f01daae6494cf03b9d43", "branch" : [ { "SHA1" : "31985b9f6c1fd6fbbc94f01daae6494cf03b9d43", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "31985b9f6c1fd6fbbc94f01daae6494cf03b9d43", "branch" : [ { "SHA1" : "31985b9f6c1fd6fbbc94f01daae6494cf03b9d43", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "31985b9f6c1fd6fbbc94f01daae6494cf03b9d43", "branch" : [ { "SHA1" : "31985b9f6c1fd6fbbc94f01daae6494cf03b9d43", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/node_manager_online.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "7a308ab029e7bc1ffaacef887d74faebb30aa1eb", "branch" : [ { "SHA1" : "7a308ab029e7bc1ffaacef887d74faebb30aa1eb", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "7a308ab029e7bc1ffaacef887d74faebb30aa1eb", "branch" : [ { "SHA1" : "7a308ab029e7bc1ffaacef887d74faebb30aa1eb", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "7a308ab029e7bc1ffaacef887d74faebb30aa1eb", "branch" : [ { "SHA1" : "7a308ab029e7bc1ffaacef887d74faebb30aa1eb", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/unified-system-monitor.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "bfa235c7c71e059475fdfcbc3b8b376bc89f9e4f", "branch" : [ { "SHA1" : "bfa235c7c71e059475fdfcbc3b8b376bc89f9e4f", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "bfa235c7c71e059475fdfcbc3b8b376bc89f9e4f", "branch" : [ { "SHA1" : "bfa235c7c71e059475fdfcbc3b8b376bc89f9e4f", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "bfa235c7c71e059475fdfcbc3b8b376bc89f9e4f", "branch" : [ { "SHA1" : "bfa235c7c71e059475fdfcbc3b8b376bc89f9e4f", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/hdcontrol.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "a1fd3a3d0ef6de6f95e15c74208bd2a60f400d31", "branch" : [ { "SHA1" : "a1fd3a3d0ef6de6f95e15c74208bd2a60f400d31", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "a1fd3a3d0ef6de6f95e15c74208bd2a60f400d31", "branch" : [ { "SHA1" : "a1fd3a3d0ef6de6f95e15c74208bd2a60f400d31", "name" : "origin/rc_dev" } ] } }, "origin/feat_xilian" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 360, "buildResult" : None, "marked" : { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "branch" : [ { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "name" : "origin/feat_xilian" } ] }, "revision" : { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "branch" : [ { "SHA1" : "962e56eb5fcb8ad0cdaded80d1f8afd02fb99672", "name" : "origin/feat_xilian" } ] } } }, "lastBuiltRevision" : { "SHA1" : "a1fd3a3d0ef6de6f95e15c74208bd2a60f400d31", "branch" : [ { "SHA1" : "a1fd3a3d0ef6de6f95e15c74208bd2a60f400d31", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/rcinterpreter.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "1aedd76cbc401db5befe42f441bb6f2160c3e079", "branch" : [ { "SHA1" : "1aedd76cbc401db5befe42f441bb6f2160c3e079", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "1aedd76cbc401db5befe42f441bb6f2160c3e079", "branch" : [ { "SHA1" : "1aedd76cbc401db5befe42f441bb6f2160c3e079", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "1aedd76cbc401db5befe42f441bb6f2160c3e079", "branch" : [ { "SHA1" : "1aedd76cbc401db5befe42f441bb6f2160c3e079", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/versions_observer.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "47768260121e52f51866cefa071834322385064f", "branch" : [ { "SHA1" : "47768260121e52f51866cefa071834322385064f", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "47768260121e52f51866cefa071834322385064f", "branch" : [ { "SHA1" : "47768260121e52f51866cefa071834322385064f", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "47768260121e52f51866cefa071834322385064f", "branch" : [ { "SHA1" : "47768260121e52f51866cefa071834322385064f", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/cache_bag_node.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "a77a4638b727045c8c5cc0b2b6b301a2577e6e06", "branch" : [ { "SHA1" : "a77a4638b727045c8c5cc0b2b6b301a2577e6e06", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "a77a4638b727045c8c5cc0b2b6b301a2577e6e06", "branch" : [ { "SHA1" : "a77a4638b727045c8c5cc0b2b6b301a2577e6e06", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "a77a4638b727045c8c5cc0b2b6b301a2577e6e06", "branch" : [ { "SHA1" : "a77a4638b727045c8c5cc0b2b6b301a2577e6e06", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/system_monitor.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "branch" : [ { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "branch" : [ { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "branch" : [ { "SHA1" : "73e95137391591b7c905e6dd4eb404e52e4b8c39", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/performance_analyst.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "branch" : [ { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "branch" : [ { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "branch" : [ { "SHA1" : "7b064e3b80995303611ab5324265fecfed3eaef8", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/schedule_manager.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "60cddb799ecf989637f7628dd7790cbbf249615a", "branch" : [ { "SHA1" : "60cddb799ecf989637f7628dd7790cbbf249615a", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "60cddb799ecf989637f7628dd7790cbbf249615a", "branch" : [ { "SHA1" : "60cddb799ecf989637f7628dd7790cbbf249615a", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "60cddb799ecf989637f7628dd7790cbbf249615a", "branch" : [ { "SHA1" : "60cddb799ecf989637f7628dd7790cbbf249615a", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/calibration_tools.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "cba9cbaf4225ccc7a789ca75d6b0dadc9380f1fd", "branch" : [ { "SHA1" : "cba9cbaf4225ccc7a789ca75d6b0dadc9380f1fd", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "cba9cbaf4225ccc7a789ca75d6b0dadc9380f1fd", "branch" : [ { "SHA1" : "cba9cbaf4225ccc7a789ca75d6b0dadc9380f1fd", "name" : "origin/rc_dev" } ] } }, "origin/rc_dev_add_lane_name" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 319, "buildResult" : None, "marked" : { "SHA1" : "368c897176bca10687638a0c815cb7772a793e51", "branch" : [ { "SHA1" : "368c897176bca10687638a0c815cb7772a793e51", "name" : "origin/rc_dev_add_lane_name" } ] }, "revision" : { "SHA1" : "368c897176bca10687638a0c815cb7772a793e51", "branch" : [ { "SHA1" : "368c897176bca10687638a0c815cb7772a793e51", "name" : "origin/rc_dev_add_lane_name" } ] } } }, "lastBuiltRevision" : { "SHA1" : "cba9cbaf4225ccc7a789ca75d6b0dadc9380f1fd", "branch" : [ { "SHA1" : "cba9cbaf4225ccc7a789ca75d6b0dadc9380f1fd", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/map/hdmap_interface.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "eefb2ce464f4a3cd0df486b5146031a25b6058c9", "branch" : [ { "SHA1" : "eefb2ce464f4a3cd0df486b5146031a25b6058c9", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "eefb2ce464f4a3cd0df486b5146031a25b6058c9", "branch" : [ { "SHA1" : "eefb2ce464f4a3cd0df486b5146031a25b6058c9", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "eefb2ce464f4a3cd0df486b5146031a25b6058c9", "branch" : [ { "SHA1" : "eefb2ce464f4a3cd0df486b5146031a25b6058c9", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/imv_spreader_detection.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/dev_truck_comment_lh" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "2a51fa9509564615ba3d60d06b4705eb1eef50e6", "branch" : [ { "SHA1" : "2a51fa9509564615ba3d60d06b4705eb1eef50e6", "name" : "origin/dev_truck_comment_lh" } ] }, "revision" : { "SHA1" : "2a51fa9509564615ba3d60d06b4705eb1eef50e6", "branch" : [ { "SHA1" : "2a51fa9509564615ba3d60d06b4705eb1eef50e6", "name" : "origin/dev_truck_comment_lh" } ] } } }, "lastBuiltRevision" : { "SHA1" : "2a51fa9509564615ba3d60d06b4705eb1eef50e6", "branch" : [ { "SHA1" : "2a51fa9509564615ba3d60d06b4705eb1eef50e6", "name" : "origin/dev_truck_comment_lh" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar_localization_mapping/crane_align.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "5387df446b592974d1bba8506c2d000ee9107f04", "branch" : [ { "SHA1" : "5387df446b592974d1bba8506c2d000ee9107f04", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "5387df446b592974d1bba8506c2d000ee9107f04", "branch" : [ { "SHA1" : "5387df446b592974d1bba8506c2d000ee9107f04", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "5387df446b592974d1bba8506c2d000ee9107f04", "branch" : [ { "SHA1" : "5387df446b592974d1bba8506c2d000ee9107f04", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/driver_and_tools/warningmodule.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "bd34d11835ff278a5fbd1f2ed73187a7c40d4259", "branch" : [ { "SHA1" : "bd34d11835ff278a5fbd1f2ed73187a7c40d4259", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "bd34d11835ff278a5fbd1f2ed73187a7c40d4259", "branch" : [ { "SHA1" : "bd34d11835ff278a5fbd1f2ed73187a7c40d4259", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "bd34d11835ff278a5fbd1f2ed73187a7c40d4259", "branch" : [ { "SHA1" : "bd34d11835ff278a5fbd1f2ed73187a7c40d4259", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/new_truck_spreader_detection.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "9b50da34e2f8c268a4b0e0466f65c04dcfdb5517", "branch" : [ { "SHA1" : "9b50da34e2f8c268a4b0e0466f65c04dcfdb5517", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "9b50da34e2f8c268a4b0e0466f65c04dcfdb5517", "branch" : [ { "SHA1" : "9b50da34e2f8c268a4b0e0466f65c04dcfdb5517", "name" : "origin/rc_dev" } ] } }, "origin/rc_dev_1.5.18" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 398, "buildResult" : None, "marked" : { "SHA1" : "b32f37e9296c3dc15702fca83cd6a368efc316b5", "branch" : [ { "SHA1" : "b32f37e9296c3dc15702fca83cd6a368efc316b5", "name" : "origin/rc_dev_1.5.18" } ] }, "revision" : { "SHA1" : "b32f37e9296c3dc15702fca83cd6a368efc316b5", "branch" : [ { "SHA1" : "b32f37e9296c3dc15702fca83cd6a368efc316b5", "name" : "origin/rc_dev_1.5.18" } ] } } }, "lastBuiltRevision" : { "SHA1" : "9b50da34e2f8c268a4b0e0466f65c04dcfdb5517", "branch" : [ { "SHA1" : "9b50da34e2f8c268a4b0e0466f65c04dcfdb5517", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/driver_and_tools/rslidar_sdk_new.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "branch" : [ { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "branch" : [ { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "branch" : [ { "SHA1" : "7b707e2e1522d87449a46353714b133cd28c9639", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/lidar/perception_publisher.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "52ee44eb94b17438714bca4bd4fbb72938c3e612", "branch" : [ { "SHA1" : "52ee44eb94b17438714bca4bd4fbb72938c3e612", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "52ee44eb94b17438714bca4bd4fbb72938c3e612", "branch" : [ { "SHA1" : "52ee44eb94b17438714bca4bd4fbb72938c3e612", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "52ee44eb94b17438714bca4bd4fbb72938c3e612", "branch" : [ { "SHA1" : "52ee44eb94b17438714bca4bd4fbb72938c3e612", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/system/rtsp_relayer.git" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "3131fa9de218f738af26c976ed78ca9167f05d74", "branch" : [ { "SHA1" : "3131fa9de218f738af26c976ed78ca9167f05d74", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "3131fa9de218f738af26c976ed78ca9167f05d74", "branch" : [ { "SHA1" : "3131fa9de218f738af26c976ed78ca9167f05d74", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "3131fa9de218f738af26c976ed78ca9167f05d74", "branch" : [ { "SHA1" : "3131fa9de218f738af26c976ed78ca9167f05d74", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/driver_and_tools/hesai_lidar.git" ], "scmName" : "" }, { }, { }, { }, { "_class" : "org.jenkinsci.plugins.workflow.cps.view.InterpolatedSecretsAction" }, { }, { }, { }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "origin/rc_dev" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 420, "buildResult" : None, "marked" : { "SHA1" : "95ec724887af1b240b58915e6d1946ca3d6f4520", "branch" : [ { "SHA1" : "95ec724887af1b240b58915e6d1946ca3d6f4520", "name" : "origin/rc_dev" } ] }, "revision" : { "SHA1" : "95ec724887af1b240b58915e6d1946ca3d6f4520", "branch" : [ { "SHA1" : "95ec724887af1b240b58915e6d1946ca3d6f4520", "name" : "origin/rc_dev" } ] } } }, "lastBuiltRevision" : { "SHA1" : "95ec724887af1b240b58915e6d1946ca3d6f4520", "branch" : [ { "SHA1" : "95ec724887af1b240b58915e6d1946ca3d6f4520", "name" : "origin/rc_dev" } ] }, "remoteUrls" : [ "http://159.27.226.4/map/hdmap_analysis.git" ], "scmName" : "" }, { }, { }, { }, { }, { }, { }, { "_class" : "org.jenkinsci.plugins.displayurlapi.actions.RunDisplayAction" }, { "_class" : "org.jenkinsci.plugins.pipeline.modeldefinition.actions.RestartDeclarativePipelineAction" }, { }, { "_class" : "org.jenkinsci.plugins.workflow.job.views.FlowGraphAction" }, { }, { }, { } ], "artifacts" : [ ], "building" : False, "description" : None, "displayName" : "#420", "duration" : 2400921, "estimatedDuration" : 2014768, "executor" : None, "fullDisplayName" : "orin-slave32 #420", "id" : "420", "keepLog" : False, "number" : 420, "queueId" : 1200840, "result" : "SUCCESS", "timestamp" : 1783216717100, "url" : "http://159.27.114.184:8080/jenkins/user/yangjun/my-views/view/all/job/orin-slave32/420/", "changeSets" : [ { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "data/wbca/wbca_data.cpp", "algorithm/wbca/path_optimization/path_optimization.cpp", "algorithm/wbca/imv_wbca_manager.cpp", "data/wbca/wbca_data.hpp" ], "commitId" : "ec973944b1c5336b5bc7b0be2ee23c1fe9e8722c", "timestamp" : 1780043477000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/chenran", "fullName" : "chenran" }, "authorEmail" : "chenran@senior.auto", "comment" : "fix: add smooth_mode opt\u000a", "date" : "2026-05-29 16:31:17 +0800", "id" : "ec973944b1c5336b5bc7b0be2ee23c1fe9e8722c", "msg" : "fix: add smooth_mode opt", "paths" : [ { "editType" : "edit", "file" : "data/wbca/wbca_data.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" }, { "editType" : "edit", "file" : "data/wbca/wbca_data.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/imv_wbca_manager.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/wbca_manager.cpp", "algorithm/wbca/imv_wbca_manager.hpp", "algorithm/wbca/imv_wbca_manager.cpp", "algorithm/wbca/wbca_manager.hpp" ], "commitId" : "3d1116dbde5bce9a82f7fe09b17c4bb1d4191b92", "timestamp" : 1780052167000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/chenran", "fullName" : "chenran" }, "authorEmail" : "chenran@senior.auto", "comment" : "fix: smooth mode optimization\u000a", "date" : "2026-05-29 18:56:07 +0800", "id" : "3d1116dbde5bce9a82f7fe09b17c4bb1d4191b92", "msg" : "fix: smooth mode optimization", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.hpp" }, { "editType" : "edit", "file" : "algorithm/wbca/wbca_manager.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/imv_wbca_manager.cpp" }, { "editType" : "edit", "file" : "algorithm/wbca/imv_wbca_manager.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/path_optimization.cpp" ], "commitId" : "f9a6597d905bb67f260fa38a8a12d1c0fa1d5023", "timestamp" : 1780299858000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/chenran", "fullName" : "chenran" }, "authorEmail" : "chenran@senior.auto", "comment" : "fix: cancel wbca smooth_mode for the first frame\u000a", "date" : "2026-06-01 15:44:18 +0800", "id" : "f9a6597d905bb67f260fa38a8a12d1c0fa1d5023", "msg" : "fix: cancel wbca smooth_mode for the first frame", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/path_optimization.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/common/utils/clipper2/include/clipper2/clipper.version.h", "ssep/keb_optimizer/cost_features/imv_steer_constraint.h", "tasks/plan/keb_lane_follow_path_task.cpp", "ssep/common/utils/clipper2/src/clipper.triangulation.cpp", "offboard/keb_path_opt_cli/keb_scene_converter.cc", "ssep/common/utils/clipper2/include/clipper2/clipper.rectclip.h", "ssep/keb_optimizer/distance_field_interpolator.h", "ssep/common/utils/clipper2/src/clipper.engine.cpp", "ssep/common/utils/clipper2/include/clipper2/clipper.engine.h", "ssep/keb_optimizer/cost_features/cost_functions.h", "ssep/common/utils/clipper2/include/clipper2/clipper.export.h", "ssep/keb_optimizer/keb_problem.cc", "offboard/keb_path_opt_cli/keb_optimization_debug_visualizer.cc", "algorithm/plan/keb_optimizer.cpp", "offboard/keb_path_opt_cli/keb_simulator.cc", "ssep/common/utils/clipper2/include/clipper2/clipper.triangulation.h", "ssep/keb_optimizer/cost_features/sdf_disk_collision_cost.h", "ssep/keb_optimizer/cost_features/imv_kinematic_constraint.h", "ssep/common/utils/clipper2/include/clipper2/clipper.core.h", "ssep/common/utils/clipper2/include/clipper2/clipper.minkowski.h", "ssep/keb_optimizer/imv_keb_optimizer.cc", "ssep/common/utils/clipper2/include/clipper2/clipper.offset.h", "ssep/CMakeLists.txt", "ssep/data_structures/polyline.cc", "ssep/common/utils/clipper2/src/clipper.offset.cpp", "ssep/common/utils/clipper2/src/clipper.rectclip.cpp", "ssep/keb_optimizer/keb_problem.h", "ssep/common/utils/clipper2/include/clipper2/clipper.h", "offboard/keb_path_opt_cli/keb_optimization_debug_visualizer.hpp" ], "commitId" : "bf5c8b6a5d40a577e06606874e8c3225fb2d58ee", "timestamp" : 1780580361000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: Keb: 1. 引入clipper2几何运算库处理多边形的膨胀腐蚀操作。解决之前的膨胀逻辑对某些特殊形状处理存在错误的问题。2. 将最近点膨胀代价升级为sdf碰撞检测代价，鲁棒性更高收敛更快。3. 前轮转向约束使用softplus函数建立梯度平滑的约束，解决在极限转弯场景优化时梯度跳变的问题。\u000a\u000a", "date" : "2026-06-04 21:39:21 +0800", "id" : "bf5c8b6a5d40a577e06606874e8c3225fb2d58ee", "msg" : "feat: Keb: 1. 引入clipper2几何运算库处理多边形的膨胀腐蚀操作。解决之前的膨胀逻辑对某些特殊形状处理存在错误的问题。2. 将最近点膨胀代价升级为sdf碰撞检测代价，鲁棒性更高收敛更快。3. 前轮转向约束使用softplus函数建立梯度平滑的约束，解决在极限转弯场景优化时梯度跳变的问题。", "paths" : [ { "editType" : "add", "file" : "ssep/keb_optimizer/cost_features/cost_functions.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/include/clipper2/clipper.export.h" }, { "editType" : "edit", "file" : "algorithm/plan/keb_optimizer.cpp" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/include/clipper2/clipper.minkowski.h" }, { "editType" : "edit", "file" : "ssep/data_structures/polyline.cc" }, { "editType" : "edit", "file" : "ssep/CMakeLists.txt" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/include/clipper2/clipper.version.h" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/src/clipper.triangulation.cpp" }, { "editType" : "add", "file" : "ssep/keb_optimizer/distance_field_interpolator.h" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/src/clipper.engine.cpp" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/src/clipper.offset.cpp" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/include/clipper2/clipper.rectclip.h" }, { "editType" : "edit", "file" : "offboard/keb_path_opt_cli/keb_optimization_debug_visualizer.cc" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/include/clipper2/clipper.offset.h" }, { "editType" : "edit", "file" : "offboard/keb_path_opt_cli/keb_scene_converter.cc" }, { "editType" : "edit", "file" : "offboard/keb_path_opt_cli/keb_optimization_debug_visualizer.hpp" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/imv_kinematic_constraint.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/cost_features/imv_steer_constraint.h" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/include/clipper2/clipper.triangulation.h" }, { "editType" : "add", "file" : "ssep/keb_optimizer/cost_features/sdf_disk_collision_cost.h" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/src/clipper.rectclip.cpp" }, { "editType" : "edit", "file" : "offboard/keb_path_opt_cli/keb_simulator.cc" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/include/clipper2/clipper.core.h" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/include/clipper2/clipper.engine.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" }, { "editType" : "edit", "file" : "tasks/plan/keb_lane_follow_path_task.cpp" }, { "editType" : "add", "file" : "ssep/common/utils/clipper2/include/clipper2/clipper.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/constrain/block_data.cpp", "data/config/cfg_safe_const.hpp", "data/config/cfg_safe_const.cpp" ], "commitId" : "4e529beda6281c89daa913f798b557c92d0a3df5", "timestamp" : 1780997289000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/chenran", "fullName" : "chenran" }, "authorEmail" : "chenran@senior.auto", "comment" : "fix: curature over limit stop optimization\u000a", "date" : "2026-06-09 17:28:09 +0800", "id" : "4e529beda6281c89daa913f798b557c92d0a3df5", "msg" : "fix: curature over limit stop optimization", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" }, { "editType" : "edit", "file" : "data/constrain/block_data.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "offboard/keb_path_opt_cli/keb_scene_converter.cc", "ssep/maps/ogm.h", "tasks/plan/keb_utils_core.cpp", "ssep/maps/ogm.cc", "ssep/keb_optimizer/keb_problem.cc", "ssep/maps/ogm_builder.cc", "tasks/plan/keb_utils_core.hpp", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "data/config/cfg_lat_plan.cpp", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h", "algorithm/plan/keb_optimizer.cpp", "ssep/maps/ogm_builder.h", "ssep/keb_optimizer/keb_problem.h", "offboard/keb_path_opt_cli/keb_simulator.cc" ], "commitId" : "5b1a62a1b19dc733d075fcb7f51dab31938582f4", "timestamp" : 1781010932000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "chore: Keb: 集卡进堆场增加“最后拉直段减小避障半径”的逻辑\u000a\u000a", "date" : "2026-06-09 21:15:32 +0800", "id" : "5b1a62a1b19dc733d075fcb7f51dab31938582f4", "msg" : "chore: Keb: 集卡进堆场增加“最后拉直段减小避障半径”的逻辑", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" }, { "editType" : "edit", "file" : "ssep/maps/ogm_builder.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.h" }, { "editType" : "edit", "file" : "algorithm/plan/keb_optimizer.cpp" }, { "editType" : "edit", "file" : "tasks/plan/keb_utils_core.cpp" }, { "editType" : "edit", "file" : "tasks/plan/keb_utils_core.hpp" }, { "editType" : "edit", "file" : "ssep/maps/ogm.h" }, { "editType" : "edit", "file" : "offboard/keb_path_opt_cli/keb_scene_converter.cc" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" }, { "editType" : "edit", "file" : "offboard/keb_path_opt_cli/keb_simulator.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.h" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/maps/ogm_builder.cc" }, { "editType" : "edit", "file" : "ssep/maps/ogm.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/maps/ogm_config_utils.h", "ssep/maps/ogm_config_utils.cc", "ssep/ssep_planner.cc" ], "commitId" : "7af0c7391673b03d1f2c27d375eb87e89d84fdcf", "timestamp" : 1781073903000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "refactor: SSEP: 重构OGM构建流程\u000a\u000a", "date" : "2026-06-10 14:45:03 +0800", "id" : "7af0c7391673b03d1f2c27d375eb87e89d84fdcf", "msg" : "refactor: SSEP: 重构OGM构建流程", "paths" : [ { "editType" : "add", "file" : "ssep/maps/ogm_config_utils.cc" }, { "editType" : "add", "file" : "ssep/maps/ogm_config_utils.h" }, { "editType" : "edit", "file" : "ssep/ssep_planner.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ ".gitignore" ], "commitId" : "be3ce1d49b1c6d7f491a658c7263620f1afcb722", "timestamp" : 1781075255000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 添加skills到.gitignore以忽略相关文件\u000a", "date" : "2026-06-10 15:07:35 +0800", "id" : "be3ce1d49b1c6d7f491a658c7263620f1afcb722", "msg" : "feat: 添加skills到.gitignore以忽略相关文件", "paths" : [ { "editType" : "edit", "file" : ".gitignore" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/app/fsm/motion_fsm/motion_move_fsm/motion_move_fsm.cpp", "data/constrain/longitude_constrain.hpp", "data/app/fsm/stop_reason.cpp", "data/constrain/longitude_constrain.cpp" ], "commitId" : "c8876f9999372ab3bfe13fbffda89c1ecef66548", "timestamp" : 1781075255000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: step align状态下，吊具防护，montion状态机切换的bug\u000a", "date" : "2026-06-10 15:07:35 +0800", "id" : "c8876f9999372ab3bfe13fbffda89c1ecef66548", "msg" : "fix: step align状态下，吊具防护，montion状态机切换的bug", "paths" : [ { "editType" : "edit", "file" : "data/constrain/longitude_constrain.hpp" }, { "editType" : "edit", "file" : "data/app/fsm/stop_reason.cpp" }, { "editType" : "edit", "file" : "data/constrain/longitude_constrain.cpp" }, { "editType" : "edit", "file" : "data/app/fsm/motion_fsm/motion_move_fsm/motion_move_fsm.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/pnc_map_helper.hpp", "plan/prepare/prepare_status.cpp", "data/map/pnc_map/pnc_map_helper.cpp" ], "commitId" : "a36a7f30bdbce770bcbb209a26e659a01417e257", "timestamp" : 1781075255000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复进充电桩，场景适配错误的bug\u000a", "date" : "2026-06-10 15:07:35 +0800", "id" : "a36a7f30bdbce770bcbb209a26e659a01417e257", "msg" : "fix:修复进充电桩，场景适配错误的bug", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map_helper.hpp" }, { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map_helper.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_status.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/keb_utils.cpp", "tasks/plan/keb_utils.hpp" ], "commitId" : "72ef714fd0e866823e7d2dd7c0df42e08a47dac7", "timestamp" : 1781076428000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: Keb: 删除未用到的“BuildKebOGM”方法\u000a\u000a", "date" : "2026-06-10 15:27:08 +0800", "id" : "72ef714fd0e866823e7d2dd7c0df42e08a47dac7", "msg" : "fix: Keb: 删除未用到的“BuildKebOGM”方法", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/keb_utils.cpp" }, { "editType" : "edit", "file" : "tasks/plan/keb_utils.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hmi/replayer_hmi.hpp", "hmi/widget/path_curve_detail.hpp", "hmi/node_hmi.hpp", "hmi/widget/path_curve_detail.cpp", "hmi/replayer_hmi.cpp", "hmi/node_hmi.cpp" ], "commitId" : "9303bd8e2d53b8012b3756c1275e8ce4f9599094", "timestamp" : 1781081026000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat(hmi): 新增路径曲线面板 path_curve_detail\u000a", "date" : "2026-06-10 16:43:46 +0800", "id" : "9303bd8e2d53b8012b3756c1275e8ce4f9599094", "msg" : "feat(hmi): 新增路径曲线面板 path_curve_detail", "paths" : [ { "editType" : "edit", "file" : "hmi/node_hmi.hpp" }, { "editType" : "edit", "file" : "hmi/replayer_hmi.cpp" }, { "editType" : "edit", "file" : "hmi/replayer_hmi.hpp" }, { "editType" : "add", "file" : "hmi/widget/path_curve_detail.hpp" }, { "editType" : "add", "file" : "hmi/widget/path_curve_detail.cpp" }, { "editType" : "edit", "file" : "hmi/node_hmi.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/util/curvature.hpp", "algorithm/util/curvature.cpp", "data/common/guide_path.cpp", "data/plan/path_data.cpp" ], "commitId" : "aceeded995c38d29a70420d2aa4721405dd9f2f3", "timestamp" : 1781081617000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor:优化引导线曲率跳变的bug\u000a", "date" : "2026-06-10 16:53:37 +0800", "id" : "aceeded995c38d29a70420d2aa4721405dd9f2f3", "msg" : "refactor:优化引导线曲率跳变的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/path_data.cpp" }, { "editType" : "edit", "file" : "algorithm/util/curvature.cpp" }, { "editType" : "edit", "file" : "algorithm/util/curvature.hpp" }, { "editType" : "edit", "file" : "data/common/guide_path.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "scripts/clang_format.sh" ], "commitId" : "c993e76f4bcac3a41330f1f0e86409606f30ba66", "timestamp" : 1781082251000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: 更新 clang-format 命令的使用说明和检查逻辑\u000a", "date" : "2026-06-10 17:04:11 +0800", "id" : "c993e76f4bcac3a41330f1f0e86409606f30ba66", "msg" : "fix: 更新 clang-format 命令的使用说明和检查逻辑", "paths" : [ { "editType" : "edit", "file" : "scripts/clang_format.sh" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/plan/pjpo.cpp", "math/piecewise_jerk/piecewise_jerk_problem.cpp", "math/piecewise_jerk/piecewise_jerk_problem.hpp", "math/piecewise_jerk/piecewise_jerk_path_problem.cpp", "tasks/plan/pjpo_task.cpp" ], "commitId" : "dcf2390c1b8735e60ba08704a7d4c9796a2fb94f", "timestamp" : 1781088125000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 添加软约束以支持初始状态的灵活性\u000a\u000a- 在 PiecewiseJerkProblem 中添加了对初始状态的软约束支持，允许在优化过程中对初始位置（l）、速度（dl）和加速度（ddl）进行灵活处理。\u000a- 更新了相关的计算和约束逻辑，以支持软约束的引入。\u000a- 在 PJPO 算法中实现了对初始状态的软化处理，增强了路径优化的鲁棒性。\u000a- 进行了代码格式化和逻辑优化，提高了代码可读性。\u000a", "date" : "2026-06-10 18:42:05 +0800", "id" : "dcf2390c1b8735e60ba08704a7d4c9796a2fb94f", "msg" : "feat: 添加软约束以支持初始状态的灵活性", "paths" : [ { "editType" : "edit", "file" : "math/piecewise_jerk/piecewise_jerk_problem.cpp" }, { "editType" : "edit", "file" : "math/piecewise_jerk/piecewise_jerk_path_problem.cpp" }, { "editType" : "edit", "file" : "math/piecewise_jerk/piecewise_jerk_problem.hpp" }, { "editType" : "edit", "file" : "tasks/plan/pjpo_task.cpp" }, { "editType" : "edit", "file" : "algorithm/plan/pjpo.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/plan/pjpo.cpp" ], "commitId" : "e9c9d88b14b740b58efb48bf08c66eb9620ac484", "timestamp" : 1781089147000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: 注释掉停止车辆的初始化日志输出\u000a", "date" : "2026-06-10 18:59:07 +0800", "id" : "e9c9d88b14b740b58efb48bf08c66eb9620ac484", "msg" : "fix: 注释掉停止车辆的初始化日志输出", "paths" : [ { "editType" : "edit", "file" : "algorithm/plan/pjpo.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/keb_optimizer/imv_keb_optimizer.cc" ], "commitId" : "be675513a5048a731785209afa4355e958d793f7", "timestamp" : 1781091915000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: Keb: 增加IMV后方碰撞检测距离\u000a\u000a", "date" : "2026-06-10 19:45:15 +0800", "id" : "be675513a5048a731785209afa4355e958d793f7", "msg" : "fix: Keb: 增加IMV后方碰撞检测距离", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/imv_keb_optimizer.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/replayer_data_process.cpp", "plan/prepare/prepare_ogm.cpp", "data/config/cfg_hmi.hpp", "data/lattice/ogm_crash_data.cpp", "data/config/cfg_hmi.cpp", "data/lattice/ogm_crash_data.hpp", "data/plan_frame.cpp", "hmi/replayer_hmi.cpp" ], "commitId" : "1b8760659f115f904630f63c1c3846324e8a6a07", "timestamp" : 1781100097000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:replay界面添加菜单选项 控制是否进行 obj和ogm的碰撞检测\u000a", "date" : "2026-06-10 22:01:37 +0800", "id" : "1b8760659f115f904630f63c1c3846324e8a6a07", "msg" : "feat:replay界面添加菜单选项 控制是否进行 obj和ogm的碰撞检测", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_hmi.hpp" }, { "editType" : "edit", "file" : "data/plan_frame.cpp" }, { "editType" : "edit", "file" : "hmi/replayer_hmi.cpp" }, { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.cpp" }, { "editType" : "edit", "file" : "data/lattice/ogm_crash_data.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_hmi.cpp" }, { "editType" : "edit", "file" : "data/lattice/ogm_crash_data.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/cloud_trajectory.hpp" ], "commitId" : "c5cb73ea011dc96e57e8627246e29fe6cd3f8b28", "timestamp" : 1781100284000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 添加CloudTrajectoryPoint的赋值运算符重载\u000a", "date" : "2026-06-10 22:04:44 +0800", "id" : "c5cb73ea011dc96e57e8627246e29fe6cd3f8b28", "msg" : "feat: 添加CloudTrajectoryPoint的赋值运算符重载", "paths" : [ { "editType" : "edit", "file" : "data/plan/cloud_trajectory.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hmi/draw/draw_collision_detection.cpp" ], "commitId" : "cf2d8b2594e72a6829842a63598cdefe67a0cb60", "timestamp" : 1781100302000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 注释掉OgmCollisionPos函数中的更新检查\u000a", "date" : "2026-06-10 22:05:02 +0800", "id" : "cf2d8b2594e72a6829842a63598cdefe67a0cb60", "msg" : "feat: 注释掉OgmCollisionPos函数中的更新检查", "paths" : [ { "editType" : "edit", "file" : "hmi/draw/draw_collision_detection.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/replayer_data_process.cpp", "plan/prepare/prepare_ogm.cpp", "data/config/cfg_hmi.hpp", "data/lattice/ogm_crash_data.cpp", "data/config/cfg_hmi.cpp", "data/lattice/ogm_crash_data.hpp", "data/plan_frame.cpp", "hmi/replayer_hmi.cpp" ], "commitId" : "b7d0da6551b2d1288386fb5485e8e7358efaf952", "timestamp" : 1781101463000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:replay界面添加菜单选项 控制是否进行 obj和ogm的碰撞检测\u000a", "date" : "2026-06-10 22:24:23 +0800", "id" : "b7d0da6551b2d1288386fb5485e8e7358efaf952", "msg" : "feat:replay界面添加菜单选项 控制是否进行 obj和ogm的碰撞检测", "paths" : [ { "editType" : "edit", "file" : "hmi/replayer_hmi.cpp" }, { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_hmi.hpp" }, { "editType" : "edit", "file" : "data/plan_frame.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_hmi.cpp" }, { "editType" : "edit", "file" : "plan/prepare/prepare_ogm.cpp" }, { "editType" : "edit", "file" : "data/lattice/ogm_crash_data.cpp" }, { "editType" : "edit", "file" : "data/lattice/ogm_crash_data.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hmi/draw/draw_collision_detection.cpp" ], "commitId" : "5b60ab02615b439f33dce7bc015d900f4583ecf5", "timestamp" : 1781101471000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 注释掉OgmCollisionPos函数中的更新检查\u000a", "date" : "2026-06-10 22:24:31 +0800", "id" : "5b60ab02615b439f33dce7bc015d900f4583ecf5", "msg" : "feat: 注释掉OgmCollisionPos函数中的更新检查", "paths" : [ { "editType" : "edit", "file" : "hmi/draw/draw_collision_detection.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "hmi/replayer_hmi.cpp" ], "commitId" : "2be76502ab8460d9f50c979959c2bde171ff05e2", "timestamp" : 1781109945000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:合并的bug\u000a", "date" : "2026-06-11 00:45:45 +0800", "id" : "2be76502ab8460d9f50c979959c2bde171ff05e2", "msg" : "fix:合并的bug", "paths" : [ { "editType" : "edit", "file" : "hmi/replayer_hmi.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/plan/obstacle_risk_evaluation.cpp", "data/obstacle/obstacle_decider_attr.cpp", "tasks/deciders/long_decider/constrain_decider.cpp", "data/config/cfg_func_sw.hpp", "data/config/cfg_func_sw.cpp", "data/obstacle/obstacle_decider_attr.hpp", "algorithm/plan/obstacle_risk_evaluation.hpp" ], "commitId" : "2613c75400eb3d06c154c5cccbc3bc4cf8d33eaf", "timestamp" : 1781153489000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 重构障碍物风险评估器，另外添加 横路不进行 龙门吊风险限速的功能。\u000a", "date" : "2026-06-11 12:51:29 +0800", "id" : "2613c75400eb3d06c154c5cccbc3bc4cf8d33eaf", "msg" : "feat: 重构障碍物风险评估器，另外添加 横路不进行 龙门吊风险限速的功能。", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_func_sw.hpp" }, { "editType" : "edit", "file" : "data/obstacle/obstacle_decider_attr.cpp" }, { "editType" : "edit", "file" : "algorithm/plan/obstacle_risk_evaluation.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_func_sw.cpp" }, { "editType" : "edit", "file" : "algorithm/plan/obstacle_risk_evaluation.cpp" }, { "editType" : "edit", "file" : "tasks/deciders/long_decider/constrain_decider.cpp" }, { "editType" : "edit", "file" : "data/obstacle/obstacle_decider_attr.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_lat_plan.hpp", "config/config_imv/scenario.yaml", "data/config/cfg_lat_plan.cpp", "data/plan/switch_data.cpp", "data/config/cfg_stage.cpp", "tasks/plan/lane_change_path_task_v2.hpp", "tasks/task_factory.cpp", "data/config/cfg_stage.hpp", "tasks/plan/lane_change_path_task_v2.cpp" ], "commitId" : "b7f53a0bfa8f370f104b66a273b55a68190e004f", "timestamp" : 1781156898000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/chenran", "fullName" : "chenran" }, "authorEmail" : "chenran@senior.auto", "comment" : "fix: add lane_change_path_task v2\u000a", "date" : "2026-06-11 13:48:18 +0800", "id" : "b7f53a0bfa8f370f104b66a273b55a68190e004f", "msg" : "fix: add lane_change_path_task v2", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_stage.hpp" }, { "editType" : "edit", "file" : "data/plan/switch_data.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" }, { "editType" : "add", "file" : "tasks/plan/lane_change_path_task_v2.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_stage.cpp" }, { "editType" : "edit", "file" : "config/config_imv/scenario.yaml" }, { "editType" : "add", "file" : "tasks/plan/lane_change_path_task_v2.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.hpp" }, { "editType" : "edit", "file" : "tasks/task_factory.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "scenarios/lane_follow_scenario/lane_follow_stage.cpp", "scenarios/scenario.cpp", "scenarios/lane_change_scenario/lane_change_stage.cpp", "scenarios/bulkload_scenario/bulkload_move_forward_stage.cpp", "core/plan_runtime_watchdog.hpp", "scenarios/lane_change_scenario/lane_change_cancel_stage.cpp", "scenarios/ex_lane_change_scenario/ex_lane_change_stage.cpp", "scenarios/into_yard_junction_scenario/into_yard_junction_first_stage.cpp", "scenarios/bulkload_scenario/bulkload_ssep_forward_stage.cpp", "scenarios/bulkload_scenario/bulkload_ssep_backward_stage.cpp", "scenarios/parking_scenario/parking_move_stage.cpp", "scenarios/parking_scenario/parking_prepare_stage.cpp", "scenarios/lane_change_scenario/lane_change_prepare_stage.cpp", "scenarios/stage.cpp", "scenarios/out_yead_junction_scenario/out_yard_junction_first_stage.cpp", "scenarios/bulkload_scenario/bulkload_lane_change_stage.cpp", "scenarios/parking_scenario/parking_lane_change_stage.cpp", "node/logic.cpp", "scenarios/bulkload_scenario/bulkload_preapre_stage.cpp", "scenarios/bulkload_scenario/bulkload_move_backward_stage.cpp", "scenarios/ex_lane_change_scenario/ex_lane_change_prepare_stage.cpp" ], "commitId" : "d428f839d466a526ed34f78e031585e10206975a", "timestamp" : 1781159693000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor:优化看门狗功能\u000a", "date" : "2026-06-11 14:34:53 +0800", "id" : "d428f839d466a526ed34f78e031585e10206975a", "msg" : "refactor:优化看门狗功能", "paths" : [ { "editType" : "edit", "file" : "node/logic.cpp" }, { "editType" : "edit", "file" : "scenarios/scenario.cpp" }, { "editType" : "edit", "file" : "core/plan_runtime_watchdog.hpp" }, { "editType" : "edit", "file" : "scenarios/lane_change_scenario/lane_change_prepare_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/parking_scenario/parking_prepare_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/bulkload_scenario/bulkload_lane_change_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/stage.cpp" }, { "editType" : "edit", "file" : "scenarios/bulkload_scenario/bulkload_ssep_forward_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/lane_change_scenario/lane_change_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/out_yead_junction_scenario/out_yard_junction_first_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/bulkload_scenario/bulkload_ssep_backward_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/lane_follow_scenario/lane_follow_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/parking_scenario/parking_lane_change_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/bulkload_scenario/bulkload_move_backward_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/parking_scenario/parking_move_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/ex_lane_change_scenario/ex_lane_change_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/ex_lane_change_scenario/ex_lane_change_prepare_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/into_yard_junction_scenario/into_yard_junction_first_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/bulkload_scenario/bulkload_move_forward_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/lane_change_scenario/lane_change_cancel_stage.cpp" }, { "editType" : "edit", "file" : "scenarios/bulkload_scenario/bulkload_preapre_stage.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/keb_lane_follow_path_task.cpp", "tasks/plan/keb_path_optimize_task.cpp" ], "commitId" : "42ab29bd0a1c8d4a3800f387b5cc1ef27dc80fcf", "timestamp" : 1781159717000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: 移除不必要的等待调用以优化重置过程\u000a", "date" : "2026-06-11 14:35:17 +0800", "id" : "42ab29bd0a1c8d4a3800f387b5cc1ef27dc80fcf", "msg" : "fix: 移除不必要的等待调用以优化重置过程", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/keb_lane_follow_path_task.cpp" }, { "editType" : "edit", "file" : "tasks/plan/keb_path_optimize_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/bridge_junction_ec.cpp" ], "commitId" : "bbba4b68d977b68cf50ceb2db84de981abafc74b", "timestamp" : 1781159792000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:西联上下引桥 不创建双黄线约束\u000a", "date" : "2026-06-11 14:36:32 +0800", "id" : "bbba4b68d977b68cf50ceb2db84de981abafc74b", "msg" : "fix:西联上下引桥 不创建双黄线约束", "paths" : [ { "editType" : "edit", "file" : "data/ssep/bridge_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/keb_optimizer/keb_problem.cc" ], "commitId" : "34fb15d729dc025a5e709bdc5d855a2b19ba79ae", "timestamp" : 1781255589000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 修复新版本优化偶发输出异常的问题\u000a\u000a", "date" : "2026-06-12 17:13:09 +0800", "id" : "34fb15d729dc025a5e709bdc5d855a2b19ba79ae", "msg" : "fix: SSEP: 修复新版本优化偶发输出异常的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_problem.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "offboard/keb_vis_server/CMakeLists.txt" ], "commitId" : "fc11109b411434af2c1576ab31bc526414572915", "timestamp" : 1781256364000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 添加数据和ssep原型的依赖关系到keb_vis_server可执行文件\u000a", "date" : "2026-06-12 17:26:04 +0800", "id" : "fc11109b411434af2c1576ab31bc526414572915", "msg" : "feat: 添加数据和ssep原型的依赖关系到keb_vis_server可执行文件", "paths" : [ { "editType" : "edit", "file" : "offboard/keb_vis_server/CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/truck_accurate_reversing_planner.cc", "ssep/scenarios/truck_accurate_reversing_planner.h", "ssep/scenarios/scenario_planner_factory.h", "ssep/scenarios/truck_multi_segment_parking_planner.h" ], "commitId" : "dcdcb59ecbcb8a6c3f9e3855c6413a5932fd26c6", "timestamp" : 1781257884000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 自卸车/tractor的多段倒车和精确倒车可以接受extra param来设置尾部拉直距离\u000a\u000a", "date" : "2026-06-12 17:51:24 +0800", "id" : "dcdcb59ecbcb8a6c3f9e3855c6413a5932fd26c6", "msg" : "feat: SSEP: 自卸车/tractor的多段倒车和精确倒车可以接受extra param来设置尾部拉直距离", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_accurate_reversing_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/truck_multi_segment_parking_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/reference_line_info.cpp", "hmi/draw/draw_map.cpp" ], "commitId" : "59d9ca2c7297bdf49abd6f72e63f19136f01a75e", "timestamp" : 1781264469000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复变道完成后目标车道切换错误的bug\u000a", "date" : "2026-06-12 19:41:09 +0800", "id" : "59d9ca2c7297bdf49abd6f72e63f19136f01a75e", "msg" : "fix:修复变道完成后目标车道切换错误的bug", "paths" : [ { "editType" : "edit", "file" : "data/plan/reference_line_info.cpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_map.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_enter_yard_planner.h" ], "commitId" : "626f5302148dff1d0e44b0e882d968958c623674", "timestamp" : 1781507195000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 启用硬约束时使用 tunnel_constraints_ogm_ 进行碰撞检测，否则使用 ogm_\u000a\u000a", "date" : "2026-06-15 15:06:35 +0800", "id" : "626f5302148dff1d0e44b0e882d968958c623674", "msg" : "fix: SSEP: 启用硬约束时使用 tunnel_constraints_ogm_ 进行碰撞检测，否则使用 ogm_", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_enter_yard_planner.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_func_sw.cpp", "data/config/cfg_func_sw.hpp", "data/app/fsm/task_fsm/task_align_fsm/task_align_fsm.cpp" ], "commitId" : "b9e4184e63310b64757ecda7a87a85ac35332129", "timestamp" : 1781515680000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 添加堆高机靠近是否切换状态机的开关参数\u000a\u000a新增 CfgFuncSw::use_func_stacker_close_switch_fsm_(默认 true),\u000a控制 TaskAlignFsm move2lock / LockToDone 中堆高机靠近触发的状态机切换。\u000a\u000aCo-Authored-By: Claude Opus 4.8 \u000a", "date" : "2026-06-15 17:28:00 +0800", "id" : "b9e4184e63310b64757ecda7a87a85ac35332129", "msg" : "feat: 添加堆高机靠近是否切换状态机的开关参数", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_func_sw.hpp" }, { "editType" : "edit", "file" : "data/app/fsm/task_fsm/task_align_fsm/task_align_fsm.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_func_sw.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/plan/pjpo.cpp" ], "commitId" : "7b96a6a2732a9d5b6237c0c145012521be41fab4", "timestamp" : 1781517443000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor: 1.关闭起始变量的收缩。2.车辆停止时，修改dl和ddl 3.关闭全软约束\u000a", "date" : "2026-06-15 17:57:23 +0800", "id" : "7b96a6a2732a9d5b6237c0c145012521be41fab4", "msg" : "refactor: 1.关闭起始变量的收缩。2.车辆停止时，修改dl和ddl 3.关闭全软约束", "paths" : [ { "editType" : "edit", "file" : "algorithm/plan/pjpo.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/field_junction_ec.hpp", "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "2f08ec55f85fce32706cf3970a8fe7fbbde0186f", "timestamp" : 1781532209000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: <大谢>进堆场机场忽略终点约束\u000a", "date" : "2026-06-15 22:03:29 +0800", "id" : "2f08ec55f85fce32706cf3970a8fe7fbbde0186f", "msg" : "feat: <大谢>进堆场机场忽略终点约束", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/field_junction_ec.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/field_junction_ec.hpp", "data/ssep/out_yard_junction_ec.hpp", "data/ssep/into_yard_junction_ec.hpp", "data/ssep/out_yard_junction_ec.cpp" ], "commitId" : "721a4e31ae95125d507ef6d44828045909389114", "timestamp" : 1781600631000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor:优化出堆场 + 短直线+ 进堆场场景的搜索\u000a", "date" : "2026-06-16 17:03:51 +0800", "id" : "721a4e31ae95125d507ef6d44828045909389114", "msg" : "refactor:优化出堆场 + 短直线+ 进堆场场景的搜索", "paths" : [ { "editType" : "edit", "file" : "data/ssep/field_junction_ec.hpp" }, { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.hpp" }, { "editType" : "edit", "file" : "data/ssep/out_yard_junction_ec.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "scenarios/stage.cpp", "data/config/cfg_stage.cpp", "scenarios/task_condition_evaluator.cpp", "data/config/cfg_stage.hpp" ], "commitId" : "c2d6a5e60ae17c4145c7b8cffdb412b40e0a3e1c", "timestamp" : 1781603165000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 添加堆场间(BETWEEN_YARD)任务条件, 支持堆场间切换KEB横向规划器\u000a\u000a- 新增 TaskConditionType::BETWEEN_YARD, 判定复用 IsThroughYard()\u000a (STRAIGHT_OUT/INTO_YARD_MULTI/SINGLE_BEFORE 四个 region)\u000a- 收窄 YARD_PJPO_SWITCH_ENABLED 为 IsInYard(), 与 BETWEEN_YARD 互斥,\u000a 避免堆场间时 PJPO 抢占 KEB\u000a- stage.cpp: task 运行失败日志降频 LOG_EVERY_N 1->100\u000a\u000aCo-Authored-By: Claude Opus 4.8 \u000a", "date" : "2026-06-16 17:46:05 +0800", "id" : "c2d6a5e60ae17c4145c7b8cffdb412b40e0a3e1c", "msg" : "feat: 添加堆场间(BETWEEN_YARD)任务条件, 支持堆场间切换KEB横向规划器", "paths" : [ { "editType" : "edit", "file" : "scenarios/stage.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_stage.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_stage.hpp" }, { "editType" : "edit", "file" : "scenarios/task_condition_evaluator.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/replayer_data_process.cpp", "data/plan/guide_line.cpp" ], "commitId" : "e3346d428150297af330c94301c0645ecb1776db", "timestamp" : 1781615202000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:快照播放崩溃的bug\u000a", "date" : "2026-06-16 21:06:42 +0800", "id" : "e3346d428150297af330c94301c0645ecb1776db", "msg" : "fix:快照播放崩溃的bug", "paths" : [ { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.cpp" }, { "editType" : "edit", "file" : "data/plan/guide_line.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/pnc_map/pnc_map_path.cpp" ], "commitId" : "c985b5d139bd58bfced869c12fd281635385d23d", "timestamp" : 1781704635000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix:修复停止线赋值的bug\u000a", "date" : "2026-06-17 21:57:15 +0800", "id" : "c985b5d139bd58bfced869c12fd281635385d23d", "msg" : "fix:修复停止线赋值的bug", "paths" : [ { "editType" : "edit", "file" : "data/map/pnc_map/pnc_map_path.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "CMakeLists.txt" ], "commitId" : "7208d3d12ea79d541e5468946bb14f96755e6321", "timestamp" : 1781707441000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: 修复 Clang 编译器下 LLDB 调试器无法查看 STL 容器内容的问题\u000a", "date" : "2026-06-17 22:44:01 +0800", "id" : "7208d3d12ea79d541e5468946bb14f96755e6321", "msg" : "fix: 修复 Clang 编译器下 LLDB 调试器无法查看 STL 容器内容的问题", "paths" : [ { "editType" : "edit", "file" : "CMakeLists.txt" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/envelop/map_envelop.cpp" ], "commitId" : "ae7311500c04fd8ac201a456995c22500151a2b8", "timestamp" : 1781707441000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: 调整 MapEnvelop 扩展点距离参数以优化路径规划\u000a", "date" : "2026-06-17 22:44:01 +0800", "id" : "ae7311500c04fd8ac201a456995c22500151a2b8", "msg" : "fix: 调整 MapEnvelop 扩展点距离参数以优化路径规划", "paths" : [ { "editType" : "edit", "file" : "data/map/envelop/map_envelop.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/map/reference/reference_road_section.hpp", "data/map/reference/reference_road_section.cpp" ], "commitId" : "c9307e98a239504f9c8b930abc637985f9344354", "timestamp" : 1781707441000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "refactor: 支持多候选参考路段索引查找，增强 UpdateAttr 的鲁棒性\u000a", "date" : "2026-06-17 22:44:01 +0800", "id" : "c9307e98a239504f9c8b930abc637985f9344354", "msg" : "refactor: 支持多候选参考路段索引查找，增强 UpdateAttr 的鲁棒性", "paths" : [ { "editType" : "edit", "file" : "data/map/reference/reference_road_section.hpp" }, { "editType" : "edit", "file" : "data/map/reference/reference_road_section.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" ], "commitId" : "e65ecba034e9ae68666f2a036d3ac12d4ef5c7d2", "timestamp" : 1782115296000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:临时关闭车头拉直距离段内缩小碰撞buffer的操作\u000a", "date" : "2026-06-22 16:01:36 +0800", "id" : "e65ecba034e9ae68666f2a036d3ac12d4ef5c7d2", "msg" : "feat:临时关闭车头拉直距离段内缩小碰撞buffer的操作", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/lat_decider/path_bounds_decider.cpp", "tasks/plan/smooth_task.cpp" ], "commitId" : "3ea23e0b598bb67c67622c88d38bdbd563dd7d44", "timestamp" : 1782371698000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: 下码头面偏离参考线时扩大 path boundary 以避免 PJPO 求解失败\u000a\u000a在 GetBoundaryFromKinetics 中, 除 IsInIntoYardPlanner 外, 海侧路口区域\u000a(IsInSeasideJunctionRegion) 同样触发 ssep_into_yard_replan 路径边界扩大,\u000a解决下码头面车辆偏离参考线时 PJPO 因边界过窄求解失败的问题。\u000a\u000a附带补充 SmoothTask 起点平滑日志(start_ref_point/overlap_distance)便于排查。\u000a", "date" : "2026-06-25 15:14:58 +0800", "id" : "3ea23e0b598bb67c67622c88d38bdbd563dd7d44", "msg" : "fix: 下码头面偏离参考线时扩大 path boundary 以避免 PJPO 求解失败", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/lat_decider/path_bounds_decider.cpp" }, { "editType" : "edit", "file" : "tasks/plan/smooth_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/lat_decider/path_bounds_decider.cpp" ], "commitId" : "c9fd9bbde51ad4efe2c55708d2f78334455aeb14", "timestamp" : 1782371704000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: 开放空间区域同样扩大 path boundary 避免 PJPO 求解失败\u000a\u000aGetBoundaryFromKinetics 触发条件再补充 IsInOpenSpaceRegion, 使开放空间\u000a区域偏离参考线时也走 ssep_into_yard_replan 边界扩大逻辑。\u000a", "date" : "2026-06-25 15:15:04 +0800", "id" : "c9fd9bbde51ad4efe2c55708d2f78334455aeb14", "msg" : "fix: 开放空间区域同样扩大 path boundary 避免 PJPO 求解失败", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/lat_decider/path_bounds_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.cpp" ], "commitId" : "0df4a0712a596b8291cf5ce6adbe43f989093c0d", "timestamp" : 1782371714000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "fix: 大榭普通堆高机场地放宽终点约束距离, 修复进堆场 SSEP 搜索失败\u000a\u000aGetEndStraightDis 中 DAXIE 区域且 is_normal_stacking_yard_ 时, terminal_constrain_dis\u000a直接取 dst_accu_distance_after_end_stop_line_(不再扣除 5m straighten_extend_buffer),\u000a避免 end_straighten_dis_ 被过度压缩导致进堆场 SSEP 搜索失败。\u000a", "date" : "2026-06-25 15:15:14 +0800", "id" : "0df4a0712a596b8291cf5ce6adbe43f989093c0d", "msg" : "fix: 大榭普通堆高机场地放宽终点约束距离, 修复进堆场 SSEP 搜索失败", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "ssep/scenarios/scenario_planner_factory.h" ], "commitId" : "4087e2163c2b30f8fb152efde2d0612718dbb0dc", "timestamp" : 1782799227000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: SSEP: 1. 解决威海多段倒车拉直搜索会反复往前的问题。2. 修复杨浦码头面直接进堆场在超过pass point的位置重规划时会规划失败的问题。\u000a\u000a", "date" : "2026-06-30 14:00:27 +0800", "id" : "4087e2163c2b30f8fb152efde2d0612718dbb0dc", "msg" : "fix: SSEP: 1. 解决威海多段倒车拉直搜索会反复往前的问题。2. 修复杨浦码头面直接进堆场在超过pass point的位置重规划时会规划失败的问题。", "paths" : [ { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "offboard/keb_path_opt_cli/keb_scene_converter.cc", "ssep/keb_optimizer/keb_utils.cc", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "data/config/cfg_lat_plan.cpp", "tasks/plan/keb_path_optimize_task.cpp", "algorithm/plan/keb_optimizer.cpp", "tasks/plan/keb_utils_core.cpp" ], "commitId" : "f7249bacf26ce9e5f0c547161e6b20c21212f097", "timestamp" : 1782916282000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: Keb: 改进低贝位进堆场时距离上层障碍物较近的问题\u000a\u000a", "date" : "2026-07-01 22:31:22 +0800", "id" : "f7249bacf26ce9e5f0c547161e6b20c21212f097", "msg" : "fix: Keb: 改进低贝位进堆场时距离上层障碍物较近的问题", "paths" : [ { "editType" : "edit", "file" : "algorithm/plan/keb_optimizer.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_lat_plan.cpp" }, { "editType" : "edit", "file" : "offboard/keb_path_opt_cli/keb_scene_converter.cc" }, { "editType" : "edit", "file" : "tasks/plan/keb_utils_core.cpp" }, { "editType" : "edit", "file" : "tasks/plan/keb_path_optimize_task.cpp" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/keb_optimizer/keb_utils.cc" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/cloud_trajectory.hpp" ], "commitId" : "a792e8252fb9ffb453c1c3472598c59b44671b51", "timestamp" : 1782956389000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 更新 CloudTrajectory 中 curr_time_ 的初始化方式为当前时间的纳秒表示\u000a", "date" : "2026-07-02 09:39:49 +0800", "id" : "a792e8252fb9ffb453c1c3472598c59b44671b51", "msg" : "feat: 更新 CloudTrajectory 中 curr_time_ 的初始化方式为当前时间的纳秒表示", "paths" : [ { "editType" : "edit", "file" : "data/plan/cloud_trajectory.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/plan/pjpo.cpp", "math/piecewise_jerk/piecewise_jerk_problem.hpp", "Testing/pjpo_case_test.cpp", "math/piecewise_jerk/piecewise_jerk_path_problem.hpp", "math/piecewise_jerk/piecewise_jerk_problem.cpp", "algorithm/plan/pjpo.hpp", "tasks/plan/pjpo_task.cpp", "math/piecewise_jerk/piecewise_jerk_path_problem.cpp" ], "commitId" : "b7dbb9a609c445bef1a6e6740c93f76b85c4565b", "timestamp" : 1782956416000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: PJPO 增加软曲率约束并优化起点处理\u000a\u000a- piecewise_jerk 支持软曲率约束(kappa_ref/kappa_max/slack)及 all_soft 回退\u000a- pjpo 起点 init_dl/init_ddl 限幅收紧, 消除起点曲率尖峰与外扩自激\u000a- 补充 pjpo 曲率约束相关测试\u000a- 清理 PJPO 调试 trace 日志\u000a", "date" : "2026-07-02 09:40:16 +0800", "id" : "b7dbb9a609c445bef1a6e6740c93f76b85c4565b", "msg" : "feat: PJPO 增加软曲率约束并优化起点处理", "paths" : [ { "editType" : "edit", "file" : "algorithm/plan/pjpo.cpp" }, { "editType" : "edit", "file" : "algorithm/plan/pjpo.hpp" }, { "editType" : "edit", "file" : "math/piecewise_jerk/piecewise_jerk_problem.hpp" }, { "editType" : "edit", "file" : "Testing/pjpo_case_test.cpp" }, { "editType" : "edit", "file" : "tasks/plan/pjpo_task.cpp" }, { "editType" : "edit", "file" : "math/piecewise_jerk/piecewise_jerk_path_problem.cpp" }, { "editType" : "edit", "file" : "math/piecewise_jerk/piecewise_jerk_problem.cpp" }, { "editType" : "edit", "file" : "math/piecewise_jerk/piecewise_jerk_path_problem.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "replayer/replayer_data_process/replayer_data_process.cpp" ], "commitId" : "965d7b2a75bafa32202b4c386c097d9f3dd662f8", "timestamp" : 1782956482000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 在 HandleMap 中添加地图包络和中心线信息的条件判断，优化路径处理\u000a", "date" : "2026-07-02 09:41:22 +0800", "id" : "965d7b2a75bafa32202b4c386c097d9f3dd662f8", "msg" : "feat: 在 HandleMap 中添加地图包络和中心线信息的条件判断，优化路径处理", "paths" : [ { "editType" : "edit", "file" : "replayer/replayer_data_process/replayer_data_process.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/deciders/lat_decider/path_bounds_decider.cpp" ], "commitId" : "89119eedda78c243c52dcf28b819bcaf596d458a", "timestamp" : 1782956508000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 在 GetBoundaryFromKinetics 中添加场景管理器判断，优化路径边界计算\u000a", "date" : "2026-07-02 09:41:48 +0800", "id" : "89119eedda78c243c52dcf28b819bcaf596d458a", "msg" : "feat: 在 GetBoundaryFromKinetics 中添加场景管理器判断，优化路径边界计算", "paths" : [ { "editType" : "edit", "file" : "tasks/deciders/lat_decider/path_bounds_decider.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/start_point_data.cpp" ], "commitId" : "93918e80527f8f7b718da6994ce59587e4087a24", "timestamp" : 1782956524000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 在 GetLatPoint 中添加起点曲率限制，优化车辆运动学处理\u000a", "date" : "2026-07-02 09:42:04 +0800", "id" : "93918e80527f8f7b718da6994ce59587e4087a24", "msg" : "feat: 在 GetLatPoint 中添加起点曲率限制，优化车辆运动学处理", "paths" : [ { "editType" : "edit", "file" : "data/plan/start_point_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_env_const.hpp", "data/config/cfg_env_const.cpp", "data/config/cfg_func_sw.hpp", "data/config/cfg_func_sw.cpp", "data/plan/switch_data.cpp" ], "commitId" : "2881e36fca41bd9ae4d967d26eddb4d6117dd43d", "timestamp" : 1782956536000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 变道安全动态障碍物碰撞判定引入 s-t 时空耦合\u000a\u000a- CheckObjSafe 对速度足够的动态障碍物, 要求自车比其晚到冲突点至少 dt_gate\u000a (跟在其后变道), 过滤\"障碍物未来才驶入路径\"的纯空间重叠误判\u000a- 障碍物过慢(< obj_min_v_kmh)时退回空间包络判定\u000a- 新增开关 use_func_lane_change_st_time_gate_ 及 dt_gate / obj_min_v 阈值\u000a", "date" : "2026-07-02 09:42:16 +0800", "id" : "2881e36fca41bd9ae4d967d26eddb4d6117dd43d", "msg" : "feat: 变道安全动态障碍物碰撞判定引入 s-t 时空耦合", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/plan/switch_data.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.hpp" }, { "editType" : "edit", "file" : "data/config/cfg_func_sw.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_func_sw.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/plan/switch_data.hpp", "data/obstacle/ogm.hpp", "hmi/draw/draw_area.hpp", "data/obstacle/ogm.cpp", "hmi/draw/draw_area.cpp", "data/plan/switch_data.cpp" ], "commitId" : "df8ea0ed18c380880597450188436adbaf42b3e6", "timestamp" : 1782956547000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 变道 OGM 碰撞检测点 HMI 标红可视化\u000a\u000aCheckOgmSafe 收集落进安全检测区的 OGM 占用栅格点存入 switch_data(不序列化),\u000aDrawUnsafeArea 单独用 DrawOgmCrashPoints 标红, 直观显示哪块碰撞导致变道不安全。\u000aupper/underlying 两层都判断, 下层碰撞时短路跳过上层。\u000a", "date" : "2026-07-02 09:42:27 +0800", "id" : "df8ea0ed18c380880597450188436adbaf42b3e6", "msg" : "feat: 变道 OGM 碰撞检测点 HMI 标红可视化", "paths" : [ { "editType" : "edit", "file" : "data/obstacle/ogm.cpp" }, { "editType" : "edit", "file" : "data/plan/switch_data.hpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_area.hpp" }, { "editType" : "edit", "file" : "hmi/draw/draw_area.cpp" }, { "editType" : "edit", "file" : "data/obstacle/ogm.hpp" }, { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/config/cfg_safe_const.hpp", "data/config/cfg_safe_const.cpp", "data/plan/switch_data.cpp" ], "commitId" : "8acf76576fdb77b153e5472b588d07b769012797", "timestamp" : 1782956552000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 锁站变道安全校验距离引入可配 buffer 并修正近距障碍物低速阈值\u000a\u000a新增 lock_station_lane_change_safety_check_distance_buffer_ 配置项,\u000a锁站(NEAR_SEASIDE_PASSING_PT)变道时用该 buffer 替代固定 +5.0;\u000a修正 obstacle_near_speed_lower_thr_ 误写成 upper_thr 的赋值 bug。\u000a", "date" : "2026-07-02 09:42:32 +0800", "id" : "8acf76576fdb77b153e5472b588d07b769012797", "msg" : "feat: 锁站变道安全校验距离引入可配 buffer 并修正近距障碍物低速阈值", "paths" : [ { "editType" : "edit", "file" : "data/config/cfg_safe_const.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_safe_const.hpp" }, { "editType" : "edit", "file" : "data/plan/switch_data.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/pjpo_task.cpp", "data/plan/smooth_data.cpp", "tasks/plan/pjpo_task.hpp" ], "commitId" : "93284b6b898f83da2fb2d3be5561dc8d2826f770", "timestamp" : 1782956567000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 添加 UpdateAllSoftFallback 方法以处理软回退逻辑\u000a", "date" : "2026-07-02 09:42:47 +0800", "id" : "93284b6b898f83da2fb2d3be5561dc8d2826f770", "msg" : "feat: 添加 UpdateAllSoftFallback 方法以处理软回退逻辑", "paths" : [ { "editType" : "edit", "file" : "data/plan/smooth_data.cpp" }, { "editType" : "edit", "file" : "tasks/plan/pjpo_task.cpp" }, { "editType" : "edit", "file" : "tasks/plan/pjpo_task.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/plan/keb_optimizer.cpp" ], "commitId" : "92d0e0be4b06853615aeeb5832cbe87e382faa68", "timestamp" : 1782986352000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "fix: Keb: 参考线发生变化时禁用warm start，调用cold start重新优化路径\u000a\u000a", "date" : "2026-07-02 17:59:12 +0800", "id" : "92d0e0be4b06853615aeeb5832cbe87e382faa68", "msg" : "fix: Keb: 参考线发生变化时禁用warm start，调用cold start重新优化路径", "paths" : [ { "editType" : "edit", "file" : "algorithm/plan/keb_optimizer.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/into_yard_junction_ec.hpp", "data/config/cfg_env_const.hpp", "data/config/cfg_env_const.cpp", "data/other/flow_control.cpp", "data/ssep/into_yard_junction_ec.cpp", "sink/ros_sink_pnc_status.cpp" ], "commitId" : "2a07415f0d6a3151c058882dfa307f69bb6cc136", "timestamp" : 1782990203000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat: 堆场偏移区配置改用 YardType 枚举, 新增入口高处障碍物类型并延长拉直距离\u000a", "date" : "2026-07-02 19:03:23 +0800", "id" : "2a07415f0d6a3151c058882dfa307f69bb6cc136", "msg" : "feat: 堆场偏移区配置改用 YardType 枚举, 新增入口高处障碍物类型并延长拉直距离", "paths" : [ { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.hpp" }, { "editType" : "edit", "file" : "data/other/flow_control.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "sink/ros_sink_pnc_status.cpp" }, { "editType" : "edit", "file" : "data/config/cfg_env_const.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/ssep/open_space_ec.cpp", "data/ssep/online_region_contour_creator.cpp", "data/ssep/into_yard_junction_ec.cpp", "data/ssep/online_region_contour_creator.hpp" ], "commitId" : "532faa6b508d1177a3642e663079cabd4114de4d", "timestamp" : 1782990208000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "重构: 抽取搜索起点车头车挂框构造为静态函数并复用于入堆场区域\u000a\u000a- 新增 OnlineRegionContourCreator::AddStartPostureBoxes 静态函数, 集中生成膨胀后的车头(及车挂)框\u000a- open_space_ec 起点框内联逻辑改为调用该函数\u000a- into_yard_junction_ec 构建 plan_region_contour 时合并起点框, 并集失败则保持原轮廓兜底\u000a", "date" : "2026-07-02 19:03:28 +0800", "id" : "532faa6b508d1177a3642e663079cabd4114de4d", "msg" : "重构: 抽取搜索起点车头车挂框构造为静态函数并复用于入堆场区域", "paths" : [ { "editType" : "edit", "file" : "data/ssep/online_region_contour_creator.cpp" }, { "editType" : "edit", "file" : "data/ssep/open_space_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/into_yard_junction_ec.cpp" }, { "editType" : "edit", "file" : "data/ssep/online_region_contour_creator.hpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "scenarios/stage.cpp" ], "commitId" : "cc74e335904e25e57018da0c2a3a0bc6c7f69057", "timestamp" : 1782990215000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "修复任务选择器组内多条件匹配语义: AND 改为 OR, 命中任一条件即选中该 group\u000a", "date" : "2026-07-02 19:03:35 +0800", "id" : "cc74e335904e25e57018da0c2a3a0bc6c7f69057", "msg" : "修复任务选择器组内多条件匹配语义: AND 改为 OR, 命中任一条件即选中该 group", "paths" : [ { "editType" : "edit", "file" : "scenarios/stage.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "tasks/plan/keb_lane_follow_path_task.cpp" ], "commitId" : "a7c5fb041881154e18f4df7f2b1605ce023db3c0", "timestamp" : 1782993154000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "feat:调整参考线权重，从 0.0 修改为 3.0，以增强路径优化效果\u000a", "date" : "2026-07-02 19:52:34 +0800", "id" : "a7c5fb041881154e18f4df7f2b1605ce023db3c0", "msg" : "feat:调整参考线权重，从 0.0 修改为 3.0，以增强路径优化效果", "paths" : [ { "editType" : "edit", "file" : "tasks/plan/keb_lane_follow_path_task.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/scenario/scenario_region_condition.cpp", "data/scenario/scenario_region_bt.cpp" ], "commitId" : "2bbd2fb7ee835a3c61b859336e93797bc7d40e10", "timestamp" : 1783005292000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "场景决策: 修复弯道 NORMAL 兜底与直行上下桥中误判\u000a\u000a- U/S 弯 NORMAL 兜底判据统一为 BendForwardIntersection, 让桥后及海侧弯后短桥的弯能进 *_NORMAL_*_BEFORE(原 CurrentBendOut 门挡住桥上游拓扑, 卡在 seaside INSIDE)\u000a- 直行上/下桥中判据 StraightUp/DownBridgeInside 补前方 IsBend 早退, 与 Before 版对齐; 前方有弯道时不再误判为直行下桥中, 修复 BRIDGE_MULTI_LANES 被 STRAIGHT_INTO_BRIDGE_DOWN_*_INSIDE 遮蔽\u000a", "date" : "2026-07-02 23:14:52 +0800", "id" : "2bbd2fb7ee835a3c61b859336e93797bc7d40e10", "msg" : "场景决策: 修复弯道 NORMAL 兜底与直行上下桥中误判", "paths" : [ { "editType" : "edit", "file" : "data/scenario/scenario_region_bt.cpp" }, { "editType" : "edit", "file" : "data/scenario/scenario_region_condition.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "data/scenario/scenario_planner_action.cpp" ], "commitId" : "76b17b6698b320a0995125d13bbf32f3eb24810f", "timestamp" : 1783005297000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, "authorEmail" : "wuyanjun110@126.com", "comment" : "BTActRunPlanner: 进入海侧路口区域时退出常规 planner\u000a", "date" : "2026-07-02 23:14:57 +0800", "id" : "76b17b6698b320a0995125d13bbf32f3eb24810f", "msg" : "BTActRunPlanner: 进入海侧路口区域时退出常规 planner", "paths" : [ { "editType" : "edit", "file" : "data/scenario/scenario_planner_action.cpp" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc", "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h", "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc", "ssep/scenarios/planner_utils.cc", "ssep/scenarios/planner_utils.h", "ssep/scenarios/scenario_planner_factory.h", "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h", "ssep/scenarios/tractor_trailer_single_segment_parking_planner.h" ], "commitId" : "f354f26aed1119909f4b5eee277a8dfb1c7fe9bd", "timestamp" : 1783073951000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" }, "authorEmail" : "tangwenqing@senior.auto", "comment" : "feat: SSEP: 多段倒车支持无pass point模式。解决到达pass point后重规划会继续往前的问题，解决停车角度歪的问题\u000a\u000a", "date" : "2026-07-03 18:19:11 +0800", "id" : "f354f26aed1119909f4b5eee277a8dfb1c7fe9bd", "msg" : "feat: SSEP: 多段倒车支持无pass point模式。解决到达pass point后重规划会继续往前的问题，解决停车角度歪的问题", "paths" : [ { "editType" : "edit", "file" : "ssep/keb_optimizer/tractor_trailer_keb_optimizer.cc" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.h" }, { "editType" : "edit", "file" : "ssep/scenarios/planner_utils.h" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_single_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/coarse_search/searcher_builders/tractor_trailer_multi_segment_parking_bidirectional_searcher_builder.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/tractor_trailer_multi_segment_parking_planner.h" }, { "editType" : "edit", "file" : "ssep/scenarios/planner_utils.cc" }, { "editType" : "edit", "file" : "ssep/scenarios/scenario_planner_factory.h" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "algorithm/wbca/path_optimization/imv_path_optimization.cpp" ], "commitId" : "15f59cf516b4828241ba12039ef21f8630e7f54e", "timestamp" : 1783170353000, "author" : { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/chenran", "fullName" : "chenran" }, "authorEmail" : "chenran@senior.auto", "comment" : "fix: imv wbca crash bug\u000a", "date" : "2026-07-04 21:05:53 +0800", "id" : "15f59cf516b4828241ba12039ef21f8630e7f54e", "msg" : "fix: imv wbca crash bug", "paths" : [ { "editType" : "edit", "file" : "algorithm/wbca/path_optimization/imv_path_optimization.cpp" } ] } ], "kind" : "git" } ], "culprits" : [ { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuwenjing", "fullName" : "liuwenjing" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/weilikang", "fullName" : "weilikang" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhuxiaolong", "fullName" : "zhuxiaolong" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/wuyanjun110", "fullName" : "wuyanjun110" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/5081703.cr", "fullName" : "5081703.cr" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/liuhongshuo", "fullName" : "liuhongshuo" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/chenran", "fullName" : "chenran" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/zhaojianfeng2", "fullName" : "zhaojianfeng2" }, { "absoluteUrl" : "http://159.27.114.184:8080/jenkins/user/tangwenqing", "fullName" : "tangwenqing" } ], "nextBuild" : None, "previousBuild" : { "number" : 419, "url" : "http://159.27.114.184:8080/jenkins/user/yangjun/my-views/view/all/job/orin-slave32/419/" } }